Get matched with top Welders in Dania

There are 12 highly-rated local welders.

Let Angie's List help you find the right pro

We'll instantly find qualified pros for your specific project

Share some details about your project

We'll ask a few simple questions to learn more about your particular project. This helps us narrow the results to professionals that are right for the job.

View your matched pros

Using our vast network, we'll identify up to 4 local pros that provide the service you need. Don't worry... only pre-screened, approved service providers* will be suggested.

Get quotes and get started

As with any home improvement or repair project, it's wise to get multiple bids. Connect with your recommended pros and request quotes for your project.

* See Section 8 of the Terms & Conditions for details about the screening and approval of pros.

Recent Welding Reviews in Dania

  • A
    LG Welding Installation LLC
    Owen propped up the roof, he off the rusted posts, welded on galvanized replacements, put a place under them, bolted the plate to the concrete below and then filled in the hole with concrete. It looks great!
    - Linda G.
  • A
    Griffiths Metal Products Inc.
    We have used Griffiths Metal Products for almost 40 years when my parents hired them to fabricate our gate and a matching fence. I used them to renovate the gate when we remodeled and to re-fabricate the fence when it was damaged after an accident. They recently fabricated a brand new gate when we renovated and it is perfect! My neighbor had a damaged awning (they had hit one of the supports), they had two companies come out who both said that it either could not be done, or that they would have to remove the awning etc and that Ian awning company would have to replace the awning. Griffiths Metal came out and fixed it in about 45 minutes for a nominal fee. The repair is totally invisible. I have, and will continue, to use Griffiths Metal Products for any fabrication, repair or renovation job that I require. I had a 14 month renovation that took 5 years. Griffiths Metal Products was the only company that performed The job on time, on budget and just as designed. I give them my highest recommendation!
    - Andrew Hague Judge h.
  • A
    Mark's Fence and Railing
    Mark came to my home and reviewed the project. In a phone call a day or two later, he declined to proceed, saying he was too busy at the moment to do the job.
    - Gloria R.
  • A
    Griffiths Metal Products Inc.
    We had a great experience using Griffith Metal Products! Ozzie was our contact person and showed up to his initial appointment not a minute late, gave a clear estimate and timeline and delivered a beautiful product! I would absolutely use Griffith Metal Products again as well as recommend them to anyone in need of their services!
    - Madelyn M.
  • A
    Mark's Fence and Railing
    Mark's Fence and Railing is very responsive, fair in pricing and prompt in service. Mark is an honest guy- he will even tell you if the gates don't need repair and what to look out for as signs of aging or disrepair. Being in the property management business, this is extremely important to me. He can build, maintain and repair any fence or gate. I would recommend highly!! Cost below is an average repair/maintenance bill for a 48 unit apartment complex with 12 pedestrian gates.
    - Cari M.
  • A
    Mark's Fence and Railing
    Excellent All necessary engineering and permits with approved sign offs by builing official were achieved without any delays or complications.
    - Eddie W.
  • A
    Hevia Aluminum & Iron Works
    I completely recommend Alex and his Team. They are very responsive and very professional. Have no fear, they are very trustworthy. One of his crew members, Gerardo, worked tirelessly to complete the project. They did my front yard fencing and porch enclosure. It looks great!
    - Elizabeth P.
  • D
    Wellons welding and steel fabrication inc.
    I found this company (Mr. John Wellons) through a neighbor who had a fence put up by them. Mr John P Wellons came to measure and give me a quote. When I asked about permits he said I didnt really need to worry about it, but I insisted and he gave me the name of a company to call that would help me get the permit. QUALITY (this is the quality of the work done and not the quality of the fence): I was in my house when they started putting up the metal cross bars to screw the panels to and it was not done correctly. The cross bars were inside my property, which means that when he screwed the panels to the fence the "finished" or flat side would be inside my yard instead of on my neighbors side. According to zoning and coding laws the "finished side must be toward the neighbor. He did two sides like that until I went out and saw and told him to put the third finished side toward my third neighbor. I was going to change the metal cross bars on my own, but he welded the bottom metal bar to the metal posts instead of using screws. When I asked him if this would be an issue for final inspection he said "No, it wont cause any issues" (I have it in writing). Well, it has caused nothing but issues. When the inspector came to do final inspection he said that Mr. Wellons did not put enough screws in the panels. He put only two (one on top and one on the bottom) instead of four (two on top, two on the bottom). Also the inspector said that I would have to get a waiver signed by my two neighbors. One of them hates me so this is pretty impossible. One did sign. RESPONSIVENESS: Mr John Wellons said that he would take the waiver to the 2nd neighbor to get them to sign. This was several weeks ago and now when I text him he doesnt respond. He also said (and I have it in writing) that if the guy wouldnt sign then he would come and change the fence and put it the correct way with the finished side toward my neighbor. PUNCTUALITY: Mr. Wellons would call or text and say that he would be at my house by a certain time on a specific day and often times would not show up. He would just be there one day. It took him about 2 weeks to put my fence up. Additionally, once he finished I noticed that he charged me for items that he never purchased or used. For example: the charged me for 36 caps, which cover the tops of the metal posts, he only used 15 because the other posts were on my neighbors side. He did no readjust my invoice or quote. After doing some research I found that this company has been in business for 1.5 years and therefore should have known that the finished side goes towards the neighbor and that the fence panels needed 4 screws each instead of 2. I WOULD NOT RECOMMEND USING THIS COMPANY.
    - Tabitha T.
  • A
    Griffiths Metal Products Inc.
    Adam did the estimate and the repair. He was punctual and communicated clearly; he was professional and skilled. The broken spot was opened up a little before welding and the door jam shaved slightly such that the gate closes better than it did before. And he painted the repair. Thus the repair exceeded our expectations. Overall we are very pleased with the job, and would hire them again.
    - Elaine C.
  • A
    Griffiths Metal Products Inc.
    Griffith’s Metal surpassed my expectations and I would definitely recommend them to friends and colleagues in the future. They provided fantastic service and my new gate is stunning!
    - Jennifer A.
Join Angie's List to view provider's name.
Join Angie's List Now To see all 12 highly rated companies in Dania

Explore Our Solution Center for Helpful Welder Articles

Go to the article: 

4 Thing to Consider Before Hiring a Welder

.
Go to the article: 

3 Easy, Economical Ways to Winterize Your Home

.
A garden hose sits outside a house/
Go to the article: 

The Pros and Cons of Security Doors

.
Exterior door with side windows

Welders in Dania

Companies below are listed in alphabetical order.

To view top rated service providers along with reviews & ratings, JOIN ANGIE'S LIST NOW!