Get matched with top Metal Fabricators in Valley Center

There are 14 highly-rated local metal fabricators.

Metal Fabrication reviews in Valley Center

  • A
    Plumbing Plus
    It was less than other quotes, and my experience was very positive. They people were all very professional.
    - Jason S.
  • A
    Bob Jenson Air Conditioning And Heating Inc
    They replaced the AC unit  and added the down shot mounting for less than a competitor was offering to just replace the system.  Kevin Burns was tremendously professional and friendly when he gave the bid. 
    - Byron C.
  • A
    Jarrett Weld Works
    Excellent, Tanner was very professional and prompt arrive 45 minutes after I made the call, The price was outstanding.
    - Vernon L.
  • A
    Jarrett Weld Works
    Tanner is a young man with ambition and poise. He’s a very competent welder and mechanic and is a pleasure to work with.
    - Justin M.
  • A
    Jarrett Weld Works
    It went very well Tanner was extremely professional told us how the crack had formed and the best way to repair it and in an about 2 hours it was done. Most convient and easy way to go!
    - Mirjam S.
  • A
    Alan Youker Construction
    Had this originally done in 1990 by another contractor and was very satisfied with the results then. Had to replace the area around the garage due to a major garage fire and decided to have the entire house redone so that everything looked the same and new. Alan Youker Construction was the only one that I could find who did this type of work and was very satisfied with the results. Very professional, kept a clean job site, reasonable cost, and completed the work as scheduled. Materials used this time were better than 28 years ago so expect this to last just as long if not longer. Would highly recommend Alan Youker Construction.
    - David J.
  • A
    Alan Youker Construction
    Met with Alan and did a walk-through identifying main areas of damage. He noted additional areas where maintenance/repair should be performed and identified issues that need to be monitored in the future due to the time since original installation. Provided timely quote based on our discussion. Fortunately, we had stored some of the original siding which was then used to replace the damaged and blown-off sections. He sourced the exact aluminum required to fabricate sections of trim that were blown off and weathered. He was also able to match the existing bends and details of the original trim. As work progressed, he identified other areas that required repair and/or replacement. He provided a supplemental quote for this work and scope was increased accordingly. Overall excellent workmanship and attention to detail. Was on-time and cleaned up at the end of each day. Cost was reasonable based on the specialized skills and tools required.
    - John R.
  • A
    Central Heating & Air
      Charlie did a great job on replacing what would normally be considered a simple install but  had a few glictches.  1)   I am an engineer myself and ask a lot of questions, get a lot of quotes, do a lot of research etc.  I  got 5 different quotes all based on number of A ratings on Angie's list.  I chose Charlie primarily for the value of the quote he provided. (best price on combined equipment and installation).  Secondarily however, he worked with me to ensure all my questions were answered to my satisfaction including some technical issues i was concerned with.  2) Scheduling and the HOA.  since i own a townhouse in a community, i had to deal with the HOA, all the and the possibility that lines might have to be run outside the building.   Charlie was very flexible on scheduling leak test, providing information to me for the HOA etc. prior to start of work. 3) The work went relatively well.  Charlie hit a glitch because i wanted to ensure the lines were well cleaned/purged of old refrigerant prior to installing new unit since we were using old line in converting to new R410 refrigerant.  Charlie bent over backwards and worked late on a Sunday to get the cleaning/purging and installation done right so we could get the installation finished on time for me to get back to work the following day.  Secondarily, Charlie noted that the interior ductwork was routed poorly.  He replaced some and rerouted others and adjusted airflow to maximize cooling in the master BR.  4) Charlie returned several times to make sure everything was working correctly and meet the inspector to approve the installation permit. Charlie is a very easy going person and easy to deal with.   I would use him again, and recommend him to anyone needed AC/heating and or duct work.  Great value, service, attitude, work ethic.  
    - paul s.
  • A
    Central Heating & Air
    Charlie was very courteous & knowledgeable and did a great job custom building an exhaust vent for my built in microwave oven. I've tried a few handymen & another A/C installer but nobody could help me with this job. Charlie was able to take care of it easily and his price was very competitive.
    - David A.
  • A
    Artsy Reclaimed
    A Dreamy New Bathroom :) Mike and Carla went above and beyond the big task of a full bathroom re-do! They demolished the ugly old walls and floor of gold & brown 50's tile, removed the old tub, toilet and sink and brought us into the 21st century. From ceiling to floor they put their beautiful craftsman touch!! I especially love the reclaimed wood shelving and toilet paper holder and the gorgeous flooring that looks like reclaimed wood but is really tile. Don't have any hesitation in hiring this great team, they are very reasonably priced and offer professionalism and great quality!!
    - Nancy B.
Join Angie's List to view provider's name.
Join Angie's List Now To see all 14 highly rated companies in Valley Center

Explore Our Solution Center for Helpful Metal Restoration Service Articles

Go to the article: 

3 Easy, Economical Ways to Winterize Your Home

.
A garden hose sits outside a house/
Go to the article: 

The Pros and Cons of Security Doors

.
Exterior door with side windows
Go to the article: 

Best Way to Paint Metal Surfaces

.

Metal Fabricators in Valley Center

Companies below are listed in alphabetical order.

To view top rated service providers along with reviews & ratings, JOIN ANGIE'S LIST NOW!