-Find top-rated Service Providers

Find Top-Rated Tempe Insulation Contractors

Angie's List helps you hire the best - and avoid the rest!

Insulation Contractors to Avoid

169

Top Rated Insulation Contractors

51

Prevent buyer's remorse with us

  • Over 3 million people trust Angie's List to help make the right choice
  • Be informed to avoid costly mistakes
  • Shop with us to ensure a fair price
  • Our complaint resolution team will help if a project goes bad
+See Verified Local Reviews

Over 11,968 reviews for
Tempe Insulation Contractors from people just like you.

A
"After a thorough inspection of the attic space
showed me pictures of what he found and explained what was recommended for each issue (there" was evidence of rodents in multiple places and old soiled worn insulation). There had also been a raccoon in my attic last Fall. On the day of service,
came with a work crew which included himself and 3 other workers. They carefully tapped plastic around the attic entry, protecting my floor and closet from any debris or contamination. At every step of the process
spoke with me and answered any questions I had. He showed me pictures to explain the work needed and the process. Air ducting found on inspection to be disconnected was repaired at no extra charge. After clean out of the attic, there was a careful inspection from both inside the attic and on the roof for any places were rodents could possibly enter - mesh and foam were put in an opened space in a wall between my attic and the attic of my neighbor, repair of torn mesh on roof vents was done for 1 place on my roof and 2 places on my neighbor's roof where a rodent could gain entry to my attic, and mesh was put on the outside of the plumbing caps (on my request even though mesh was already on the inside of the caps). Clean up of where a raccoon had been, which was hard to reach due to the construction of the attic and roof in one spot, was done as much as possible. At the end of the work the entire work area was nicely cleaned up. I found
to have high standards for quality work, worker protection, and customer satisfaction. My attic space is low and becomes even narrower at the edges. It was hard work to crawl to reach all corners and areas of my attic to do a thorough job, which was done. All workers wore protective clothing and gear. It was a hot day and each worker was allowed in the attic for up to 15 min. at a time - I noticed this when they were vacuuming out the debris, yet it may have been for all other processes as well. Both
and
were always professional, friendly and polite and went out of their way to make sure all of my questions and concerns were addressed. On completion of the work
helped me climb the ladder to view my clean, newly insulated attic.
was always available by phone or text before and after the work and he showed up on the day of work to assure everything was going smoothly. I will also be receiving before and after photos of each phase of the work.

-Kathleen G.

A
"They were extremely quick and efficient, cleaned up after themselves, and did a superb job. When I was gathering estimates for the job,
was" the most thorough by a long shot. He also pointed out some issues (and possible future issues) that I might have that were completely unrelated to the job at hand. I will absolutely be using them again for future work.

-Nicole H.

+Shop, Schedule, and Save on Services

Shop, Search and Save from anywhere!

  • Offers are exclusively provided by highly rated companies
  • Angie’s List members have access to exclusive discounts on local services
  • Shop, schedule, and stay on top of progress from any device
  • Our 30 Day Refund Guarantee means you can buy with confidence!
+Join 2 Million People on Angie's List

Over 2 million people trust Angie's List.

  • Your Membership Includes:
  • Instant access to top rated businesses covering 700+ services
  • Our Complaint Resolution Team to help when a project goes bad
  • On-the-go access to our iPhone, Android, & iPad apps
Find top-rated Service Providers
See Verified Local Reviews
Shop, Schedule, and Save on Services
Join 2 Million People on Angie's List

Local Articles in Tempe

Avoid ice dams with proper attic insulation

Do you have icicles forming on your eaves and gutters and ice collecting on your roof? An ice dam can cause serious problems without proper insulation.

While traditional fiberglass insulation is affordable and efficient, injection foam insulation can offer even more benefits. (Photo by Summer Galyan)
Insulation

Insulation isn't sexy, but it can keep you cool at night.

Better air quality, quieter living spaces, comfort and better health are all reasons to reconsider your insulation choices. (Photo courtesy of Angie's List member Roseanne J. of Seattle)
Insulation

Not just for new construction, learn how foam insulation can be placed inside existing walls to make your home more comfortable.

By properly insulating your attic you can keep warm air from escaping and save money on your energy bills. (Photo courtesy of Vinay S. of North Brunswick, New Jersey)
Insulation

Hot air rises … but good insulation can keep your energy costs from doing the same thing.

Even in cold-weather climates, homes often lack insulation between the finished, occupied portion of the home and the ground. (Photo courtesy of Angie's List member Paul B. of Bluffton, South Carolina)
Insulation, Energy Efficiency Auditing

Exterior foundation insulation is an often overlooked home improvement. It can help stop drafts, lower energy bills and keep your house warmer during winter.

Angie's Answers

?

If you go the Better Business Bureau website you can see that the company has only had two complaints in the last 18 months and that they have both been resolved.  The company has an A+ rating.  This is not something you can buy.

 

There are genuine reviews on many 3rd party online review sites including AngiesList and the Better Business Bureau.  Simply do a Google search for "Smart Energy Today Reviews".

 

Sol Blanket Insulation acts as a radiant barrier, insulation and a vapor barrier.  It is not intended to replace traditional insulation but in fact compliments it and adds to it's ability to keep cool/hot air (depending on the season) in the home when the envelope of the home is properly sealed.  

 

Every attic is different and there are many other components that must be considered.  You mentioned an attic fan as well.  The heat that is radiated away from the ceiling by the Sol-Blanket Insulation is pushed out of the attic with an attic fan.  The US Department of Energy states that radiant barriers do work and suggest they be installed by professionals.

 

As with any product by any company if the product is not installed properly and other factors (attic fan, caulking and sealing, etc...) are not addressed then it will not be as effective.

?

A couple of comments about what Jim said:

1) Regarding type of insulation, in cold winter environments: Cellulose and fiberglass are actually about comparable in R value when installed - blown in cellulose runs from 3.2-3.8 R value, fiberglass batt 2.9-4.3 R value depending on manufacturer and whether hig-density or low density, high-efficiency or standard, according to official Department of Energy publications. Measured values in attic test cases, in areas with a true winter, after 10 years showed a decrease from 3.4 (in the test case) down to 2.1 for cellulose, and 3.5 to 3.3 for fiberglass batt, due to packing or matting. In an attic environment, there WILL be condensation or frost on the insulation at some point during the year (assuming an area with true winters) and in highly insulated houses commonly for a substantial time period each winter. Fiberglass packs down slightly from that weight but mostly rebounds, cellulose packs down and mats and does not substantially recover, so over the years cellulose loses 1/3 to close to 1/2 its insulation value, fiberglass about 10%.

2) a note on radiation barriers attached to the bottom of the rafters - there are a lot of installers and homeowners making two major mistakes with this product that can cause major trouble: First, be sure to terminate it short of the eave openings. I have seen cases where it was carried all the way out to the fascia board, thereby blocking all airflow on the underside of the roof. Even carrying it all the way to the eaves along the bottom of the rafters will block off ventilation to the main attic area. You have to leave the air space between the rafters open to full airflow from the soffit/eave area ot the ridge vent. Second, do NOT run it continuous from eave to eave across the full width of the attic - leave a gap about a foot wide under the ridge vents so warm and moist air in the attic can vent through the ridge vent. Closing the ridge vent area off with the radiant barrier effectively puts a vapor barrier around the main attic area, causing retention of the moisture which WILL accumulate there, promoting mold.

?

Obviously this is not a timely response to the initial question. However, for those who may be reading these answers at a later time, a couple of added thoughts:

1) the radiant barrier being discussed is basically heavy-duty metal foil or metallized surface on a plastic sheet, intended to reflect RADIATED heat (infrared radiation - think heat light, or heat you can feel at a distance radiated from a fireplace), the same way a mirror reflects light. Radiated heat is how a standard oven broils and how steam and hot water baseboard heat predominately work.

2) you generally should do NOT place a radiant barrier over the insulation that lies between and over the joists in a normal attic, especially in a region where the attic temperature can frequently reach condensation temperature (below about 45-50 degrees) - it may reflect back some of the house heat that is coming up from the house, but by destroying most of the temperature gradient from the house to the attic air destroys much of the driving force that moves moisture to the attic air and subsequent venting. Between that greater heat and the fact the barrier is also a moisture barrier, that makes a perfect condition for mold and rot in your insulation and attic wood, and has become quite an issue in energy upgraded homes because of retrofits that cut off airflow outside the insulation, but do not cut off the moisture source leaking thorough from the house. The proper and ONLY place for a vapor barrier in a normal attic insulation system is on the pressurized and normal warm, humid side of the insulation zone - directly above the ceiling drywall in the top floor, fastened to the UNDERSIDE of the ceiling joists or trusses, NOT anywhere above that. Perforated barriers are supposed to reduce this tendency, but the perforation area percentage is so small that typically they still act as a vapor varrier, just not a totally effective one.

3) radiant barriers reflect radiated heat ewith up to 99% efficiency but have basically zero resistance to CONDUCTION (body to body heat transfer at points of contact - think heat transfer from your warm hand to a frozen cold drink can, or hot pavement heat transfer to the bottom of your feet) - so there needs to be an air gap between the radiant barrier and the hot item passing the heat to it, otherwise the heat will just pass through it by conduction. Therefore, applying it directly to the sheathing (above or below) or manufacturing it directly on the surface of the sheathing defeats its purpose, even though this is commonly done.

4) there is a lot of discussion, particularly in the professional design community, about attic radiant heat barrier effectiveness and problems. Because they are being installed on the bottom of the sheathing or underside of roof joists, they act as a heat trap for the energy being conducted through the roof which would normally radiate into the attic air or be transferred by CONVECTION (fluid flow heat transfer) to the attic air, and be vented through roof vents, ridge vents, gable vents, etc. By trapping that heat, they are causing the underside of the shingles and particularly the felt and sheathing to get a lot hotter than they otherside would, essentially changing it from a system where the shingle top surface might reach 120-180 F and the inside surface of the sheathing about 80-140F in the summer, to making the entire roof system equal to the outside surface temperature. This causes more rapid shingle deterioration and cracking, and makes the felt or plastic moisture barrier under the shingles brittle and subject to failure.

Also, any moisture above the radiant barrier (from roof leaks or humid air coming into the area) is prevented from evaporating by the attic airflow which would normally remove it, so it starts acting like a steamer. I have seen both wood and metal lofts and attics become a major mold farm in months because of this effect, and a couple of roofs which started sagging due to rotted sheathing within 2 years of reroofing with tightly adhered radiant barrier. Some radiant barriers are vapor-permeable to reduce the moisture issue, many are not, but few actually are effective in letting moisture freely escape.

Having seen these products in use, and having analyzed and specified building products for use from the Middle East to the Arctic for decades, and having a Masters in Arctic Engineering (a degree predominately in energy conservation and heat flow), my personal opinion is that these radiant barriers will be banned by code within 10-15 years for unheated (so-called "cold" roofs) roofs, because they just do not use the principles of thermodynamics correctly. For more info on this issue Google the following search phrase  - moisture trapping by radiant attic barriers       and read the government (not the manufacturer) literature on the issue.

5) Unfortunately, the right way to handle this issue is to put the radiant surface on the OUTSIDE of the house - by using reflective materials on the roofing material. This is already done with flat roofs, house trailers, and industrial structures by spraying with alumiunum paint, and a few brands offer reflective aggregate shingles that are slightly more reflective and radiant than normal shingles. People obviously do not like this reflective surface from an aesthetic standpoint, though with solar cells coming into more general use this may soon be more widely adopted. The idea should be to keep the solar energy from penetrating into the building envelope at all, not try to re-reflect it away after it has penetrated throguh the roof system.

The sprayed-in foam has a couple of issues you need to be aware of:

6) it needs to be the low-pressure expanding type mixed for use around window frames, as fully expanding foam can bow joists or trusses and pop drywall ceilings free as it expands, and non-expanding foam actually shrinks as it cures, leaving gaps for air and heat flow alongside the ceiling joists.

7) being closed-cell it is essentially impervious to moisture, so the vapor barrier on the house side has to be EXCELLENT (incuding sealingof all penetrations), or it will trap household moisture escaping into the attic and promote mold and rot in the ceiling drywall and joists.

8) it tends to bleed chemical fumes into the house for a long period of time (can be noticeable for years), which may be objectionable to some people from an odor or environmental standpoint, and especially should be considered if any residents have severe allergy issues or respiratory problems.

9) I emphatically recommend AGAINST use of sprayed-in foam between ceiling joists or truss members in any area that can have cold attic air that could cause moisture condensation in the insulation, though this is probably not a significant problem where you live, assuming your Dallas is the city in Texas. For essentially year-around air-conditioned homes in hot climates, the problem can actually be condensation of attic air moisture on and in the colder ceiling surface insulation and on cold attic runs of air conditioned air, so attic ventilation becomes a critical issue to remove the moisture before it condenses.

In summary, having seen an awful lot of attic moisture and thermal problems, my personal recommendation would be to ensure excellent sealing of the house from the attic, use normal UNFACED fiberglass insulation, and instead of a radiant barrier ensure adequate full-attic ventilation. If you decide to got with a radiant barrier, then I would recommend a perforated one, sloping up towards the sides a foot or two and stopping a foot or so clear at the sides so moist air under it can escape to the roof joist spaces and be vented from the attic. I have seen this done several times with a fine nylon net strung above the insulation in the attic, supporting the barrier, resulting in something very similar to the double-roof system used in bedouin tents, where airflow between the two layers keep the hot air away from the living space.

?
Steve made a good point.  Also, while it isn't required to remove the old insulation you can check the ductwork, wiring, etc. with the old stuff removed,  You can also spray foam around all openings and holes in wall top plates to better seal your home as Steve was pointing out.  My concern is the potential for mold spores you mentioned in your question.  If you suspect there are any get a good company in to remove the old and clean the attic.  Another concern is asbestos.  Your home is old enough you could have it in there and that's worse than mold if released into the air.

Todd Shell
Todd's Home Services
?

A moisture barrier has to be on the warm side ie towards the heated side.  Most people would not install a moisture barrier in your situation.  (They also sell a paint that you can use on your interior ceiling? as a moisture barrier).  Rather most homeowners would hire an insulation contractor to blow a cap over the existing insulation bringing it up to your areas reccomended levels,,Your power company can tell you the level, I would guess R 40.  What you use is up to your wallet, the best is a spray foam that can be applied to the ceiling or over the whole shebang.  Being a bit of a miser I would trot on down to my local big box store and buy a truckload of cellulose and get a free blower for I and a friend to self insulte.  Big box= Menards, Lowes etc.  Cellulose= ground up paper treated with boron for insect control and fireproofing.  It has a high R value and will stop moving air loss from the home. Before you cap current mostly emply attic is ideal time to take sealant to any openings in the attic floor,  like pocket doors, canister lights electircal wires and close off the air leaks from inside.  If foaming skip this.  Hot air rises so you save yourself a ton air sealing the home.

An attic radiant barrier is also a possiblity see my blog for nifty results on it.

Jim Casper Old Energy Conservation Guru

ps moving existing insulation use a plastic rake

?

Have you checked Angie’s List? Angie’s List Answers is a great place to find advice from professionals, but for ratings, reviews and information to help you hire the companies you need, visit www.angieslist.com today.

 

 

Insulation reviews in Tempe

D

Rating
The tech got halfway through and had to stop due to hot weather. I was never able to get them back to finish the job. There was a coupon of $150 for 1,000 sq ft and I think my roof is about 2,500 sq ft. They didn't ask me to pay more than $150, so I paid $150 for radiant
Tempe Insulation Contractors Provider Name Locked
for half of my roof and will need to do the rest at some point. I will be calling someone else though.
- Ryan H.
B

Rating
They used a blower-door and thermal imaging system to identify areas of potential energy loss. He was very thorough and highly informative. Waiting for a response to my request for an itemized list of conservation measures and associated cost / energy savings.
- Mitch T.
B

Rating
The first install did not go well. Due to a spray gun system that had seen it's last days, there was excessive effervescence from the spray which ended up everywhere in the house. Also due to this issue, the mix of the SPF created a very strong
Tempe Insulation Contractors Provider Name Locked
that took weeks to clear out of the house, and I think accentuated the under spraying of the foam. The crew that took the old insulation out did ok but also created their own mess. While the crew offered to continue working on the clean up, after a couple of days I was ready for the crew to be gone.

Monitoring the performance of the SPF install (monitoring temperature of the attic vs temperature of the interior), as well as frequency of the AC running, I knew that something was wrong as the performance was not meeting expectations.

Consulting with a friend how has been in the business for over 20 years in another state, he suggested I measure the thickness of the foam on the underside of the roof. Sure enough, it had not been installed to the contracted (and required) thickness of 5.5". It was anywhere from 2 to 3 inches. So vs. R-19+, my attic now had around R-11.

The good news, and the reason why they still got relatively high ratings, is they were very responsive to this problem and set up a time to come out and they completely resprayed the attic (no additional charge).

They were using a new spray guns system the second time and the effervescence AND the smell were negligiable, which leads me to believe the first install issues were due to defective equipment.

I would still recommend
Tempe Insulation Contractors Provider Name Locked
, and would encourage anyone to have this method of home energy efficiency improvements to be done.

Many times the quality of a company is how they address problems and when something goes wrong. With
Tempe Insulation Contractors Provider Name Locked
, they were excellent in this area and were committed to getting it right.

There are a lot of fly by night companies that are trying to get into this growly popular business that do not know what they are doing so buyer beward and do your research. My advice for anyone doing this SPF process, do a walk through inspection with any contractor is done, have a piece of wire marked in inches to measure the install depth, and do your own quality control.

Tempe Insulation Contractors Provider Name Locked
is not one of those companies and as they do know what they are doing and by experience stands behind their work.
- Michael C.
A

Rating
Very professional. Two guys showed up on time. Got the job done quickly and efficiently. Cleaned up after finishing the job. Would definitely hire again.
- Susan S.
A

Rating
The first person arrived around 8:30am and they were done around 12:00 noon. The job went faster than I expected and the crew was very friendly and courteous. They did an outstanding job of putting plastic up to keep the insulation in the attic instead of on our floors. And every scrap that happened to escape was cleaned up before they left. Overall, I was extremely pleased with the service.
The company does charge $75 for quotes (the fee is waived if you follow through with the installation). I don't like this, but it seems to be an industry norm.
Tempe Insulation Contractors Provider Name Locked
did give me some general idea of how to calculate an estimate before he came, so I had a good idea of what to expect. This was the 3rd quote I had asked for from a company. The first company, the owner popped his head in the attic for just a minute (but then never sent me a quote). The second company was Lowe's, and their estimator refused to even look in the attic. When
Tempe Insulation Contractors Provider Name Locked
arrived, he went straight to the attic and crawled from one end to the other before giving me his quote. I really liked that he gives a turn-key proposal and there is zero concern about having "surprises" being added to the bill after the job is in progress. He also suggested other improvements that would allow the project to meet
Tempe Insulation Contractors Provider Name Locked
Progress's rebate program. (Note:
Tempe Insulation Contractors Provider Name Locked
is not the same as
Tempe Insulation Contractors Provider Name Locked
Progress and this often causes confusion.
Tempe Insulation Contractors Provider Name Locked
is pre-approved with both utilities.)
Tempe Insulation Contractors Provider Name Locked
is the quintessential small business owner. He is friendly, hands-on, and easy to deal with. One of the drawbacks of a small business is that when you call the main number you will have to sometimes leave a message and you have to work around their availability. However, their great customer service, good pricing, and outstanding work make dealing with this company a pleasure. They'll be my first call when we're ready for the next phase of insulating this old house.
- David B.
A

Rating
Bathroom plumbing was exposed to cold air in the poorly-insulated attic and pipes had frozen several times. After a hefty plumbing repair, the attic space was "cocooned" with foam. It must have been in the teens or 20s that day, and minutes after the foam was applied, the attic space was warm.
It went smoothly. I only wish I had these guys come in the first winter we lived in this house and had problems with freezing pipes (this was our second winter). We previously had a healthy population of insects in the basement, but almost none since the band joists were foamed.
I did a lot of research and foam is the way to go and I highly recommend K & C!
- John R.
C

Rating
The owner left me a nasty voicemail when I didn't pick up my phone while at work and then said that he thought it was another
Tempe Insulation Contractors Provider Name Locked
that had called. He gave me a quote around $8,000 but when his guys showed up, they said that most of the stuff that he had quoted, I already had like such as soffits and vents.
- Cindy L.
A

Rating
Tempe Insulation Contractors Provider Name Locked
was wonderful. He came out and inspected out attic. Explained to us that we didn't have enough insulation in some areas and that our attic floor had cracks that was letting heat and air escape into the attic which was very evident.
Tempe Insulation Contractors Provider Name Locked
was schedule to come out on a Monday when he arrived to pick up his truck to do the job it had a flat tire. He knew that I had an appoint that afternoon and was on a time crunch so he called me to explain that he could come but was concerned that it may run into my appt time. He asked if I wanted to change his installed to Wednesday so he could do a
Tempe Insulation Contractors Provider Name Locked
job, which I had no problem.
Tempe Insulation Contractors Provider Name Locked
and Stefon called 30 minutes prior to arriving show me and explained as they worked. He was also going to blow insulation under my bedroom floor thru in the garage ceiling but after he cut and hole determine if it was needed. He discover it was not needed and patched hole. I could asked for a better job. They cleaned up after themselves very nice people.
- Kimberly A H.

Insulation Contractors in Tempe, AZ

Companies below are listed in alphabetical order. To view top rated service providers along with reviews and ratings, Join Angie's List Now!

222 Development, Inc

17155 W Post Dr
Surprise

24/7 AC

500 W. Southern Ave. #14
Mesa

A Able Handyman Services

3853 W. Brown St.

Absolute Comfort Cooling & Htg

5711 W Mclellan Rd
Glendale

ACCU-TINT

511 W Guadalupe Rd
Gilbert

ACCURATE AIR CONDITIONING, INC

1321 E WEBER DR
Tempe

ACE Home Services

3933 E La Salle St
Phoenix

Ace Insulation

16114 E Fairview St
Gilbert

ACE INSULATION CO

351 E MCKINLEY ST
Tempe

Adair Plumbing

2334 W Main St
Mesa

Air Advantage

52019 Forepaugh Peak Rd
Wickenburg

Air America Inc.

6838 W Carol Ave
Peoria

Air Conditioning Experts

331 S River Dr
Tempe

Aladdins Window Tinting

9192 W. Cactus Rd Ste D
Peoria

All Service Company

5432 S Heather Drive
Tempe

American Home Shield

889 Ridge Lake Blvd

Amped Sound & Cinema

29455 N Cave Creek Rd
Cave Creek

Arizona Energy Pros

3143 E. Greenway Road
Phoenix

Arizona Solar Wave & Energy

12 West Main Street
Mesa

Atomic Pest Control

PO Box 7131
Mesa

Attic Experts Of AZ

3452 E Jaeger Cir
Mesa

Attic Solutions

PO Box 7633
Goodyear

AZ Cool Foam

3001 W Kathleen Rd
Phoenix

AZRA HOME SERVICES LLC

4408 E MALDONADO DR
Phoenix

Banker Insulation

111 S 56th St
Chandler

Barrier Insulation Inc

4624 W Acoma Dr
Glendale

BENEFIT AIR CONDITIONING LLC

1315 W Indian School Rd
Phoenix

Bill's Roofing

1404 E. Lemon St.
Tempe

Blueprint Construction And Design

235 W Santa Gertrudis Trail
Queen Creek

Bob Brown Service Experts

10020 Santa Fe Dr
Sun City

Boss Insulation

1631 East Villa Maria
Phoenix

BUCKEYE INSULATION LLC

P O BOX 244
Buckeye

Budget Sunscreens LLC

17648 N 36th St
Phoenix

Building Performance Specialist Inc.

26103 West Highway 85
Buckeye

Camelback Contractors Inc

10201 N 21st Ave Ste 9
Phoenix

Cancelli Development Group Inc.

10552 W Villa Chula
Peoria

Ceilings Etcetera Inc.

2550 S Sunland Dr
Chandler

Choice Property Construction & Remodel

16805 N Aspen Dr
Fountain Hills

Collins Comfort Masters

1455 W Scott Ave
Gilbert

Construction Pro LLC

2319 W Desiree LN
Tempe

Consumer Finance Solutions

6909 W Ray Rd., B15-106
Chandler

Cool Breeze Comfort Solutions

2050 W Hyw Dr
Tucson

Cooper Climate Control

1334 E Chandler Blvd
Phoenix

Craftsman Unlimited, Inc.

7950 E. Acoma Dr.
Scottsdale

Cross Mechanical Services, LLC

4305 West Tierra Buena Lane
Glendale

Crowley Construction Co., Inc.

3709 E SUPERIOR AVE
Phoenix

Cyber Bridge Marine, Inc.

209 S. Stephanie St

DAVIDS CUSTOM PAINTING & DRYWALL

5323 S MITCHELL DR
Tempe

Desert Rock Building and Remodeling

PMB # 275, 2753 E. Broadway
Mesa

Desert Star Pet Doors

11275 N 99th Ave
Peoria

DGR Contracting LLC

3608 W. Tina Lane
Glendale

Dryland Homewerks

Apache Junction

Drywall Perfection LLC

17177 W. Gambit Trail
Surprise

Eco Rehab

2121 S. Priest Dr.
Tempe

Eco Sun Systems

2440 W 12th St Ste 6
Tempe

EcoSystems America, LLC

8503 N 75th Ave
Peoria

ELLSWORTH HOME SERVICES LLC

700 N NEELY RD STE 1
Gilbert

Elston Technology Services, LLC

3370 N. Hayden Rd.
Scottsdale

Energy 1st Exteriors

500 N 56th St Ste 7
Chandler

Energy Conservation Specialist LLC

1601 E. Bell Rd
Phoenix

ENRIQUEZ ROOFING

PO BOX 82
Chandler

ERC Emergency Repairs & Construction

929 N. Val Vista Dr. Ste.C-109`152
Gilbert

Erus Builders LLC

2141 E Camelback Rd Ste 250
Phoenix

EXPERT HVAC SERVICES INC

1635 Sequoia Dr
Phoenix

Exterior Touch Inc.

12610 Waverly RD.

Extreme Drywall Concepts LLC

PO Box 6418
Glendale

F RODGERS INSULATION OF AZ

5325 S KYRENE RD
Tempe

Farnsworth Heating Cooling &Plumbing

2341 S Signal Butte Rd
Mesa

FIANO & SONS PLASTERING LLC

15233 E Skinner Drive
Scottsdale

Foam Experts Roofing Inc

1107 S Wilbur
Mesa

FOUNTAIN AIR

9235 E DOVER ST
Mesa

Four Seasons Roofing and Home Services

45593 W Amsterdam Rd.
Maricopa

Furcini Construction Co

4300 N 54th Street
Phoenix

Gale Contractor Services

407 S 107th Ave
Tolleson

Gale Contractor Services

8980 S McKemy St
Tempe

GALE CONTRACTOR SVC

7248 S HARL AVE
Tempe

GALE CONTRACTORS SERVICES

8980 S McKerny St
Tempe

Glendale Roofing & Construction LLC

6130 West Myrtle Ave
Glendale

Global Prevention Services

7329 E Greenway Rd
Scottsdale

GMI GENERAL CONTRACTORS INC

6511 W STATE AVE
Glendale

Green ID

1212 E Baseline Rd
Tempe

Greenhouse Energy Solutions

3150 N Arizona Ave Ste 117
Chandler

Greenmodel, LLC

5937 W Bent Tree Dr
Phoenix

Greenmodel, LLC

5937 W Bent Tree Dr
Phoenix

Grittman Installations

2525 E Libby St
Phoenix

Ground Zero Restoration

742 N Monterey St Ste B
Gilbert

Guardian Energy Solutions Inc

5245 S Kyrene Rd
Tempe

Handyman Connection - Phoenix

11435 N Cave Creek Rd
Phoenix

Handyman Matters of Scottsdale

7505 East Main St. Ste. 700
Scottsdale

Hatch Companies Contracting Inc

4105 N 20th St Ste 205
Phoenix

Hawk Builders, LLC

6040 N. 7th St .
Phoenix

Horizon Energy Systems

610 E Bell Rd
Phoenix

Howard Air

13235 N Cave Creek Rd
Phoenix

HR Roofing Solutions

1910 S Stapley
Mesa

Ideal Energy LLC

841 W. Fairmont Drive, Suite #6
Tempe

INGENIOUS REMODELING

4910 E Elliot Rd Ste 100
Phoenix

INTERNATIONAL ENVIRONMENTAL CORP

2231 S 48th St Ste 104
Tempe

iSAVE Energy

4544 E Bent Tree Dr
Cave Creek

Isley's Home Service, Inc.

219 S William Dillard Dr
Gilbert

Jovos, Inc.

2143 East Page Ave.
Gilbert

King Insulation of Arizona LLC

PO Box 18549
Phoenix

Kirk Development Co

340 E Caron St
Phoenix

Kreative Home Improvement

S. 2nd Avenue
Phoenix

L&H Desert Homes

4804 W. Misty Willow Ln.
Glendale

Lion Insulation

PO Box 147
Tolleson

Luster Custom Homes & Remodeling

18801 N Thompson Peak Pkwy.
Scottsdale

Lyons Roofing

878 W. Illini Street
Phoenix

Magic Touch Mechanical Inc

942 W 1st Avenue
Mesa

Marshall Insulation

2231 E Dragoon Ave
Mesa

MasterTech Pest Solutions

2501 W Behrend Dr
Phoenix

MJR Builders, Inc.

13430 N Scottsdale Rd
Scottsdale

Morehart Air Conditioning & heating

2663 W Lone Cactus Dr
Phoenix

Morning Star Wall Systems, Inc

PO Box 23438
Phoenix

Mountain Ridge Construction

6635 W. Happy Valley Rd
Glendale

Movin On LLC

6130 West Myrtle Ave
Glendale

Mr. Handy

1300 S Watson RD A114
Buckeye

MTR Builders Inc

28316 N 92nd Place
Scottsdale

MYF Insulation

5911 W Flower St
Phoenix

National Property Inspections

42563 W Sunland Dr
Maricopa

Next Level Remodeling Inc

3225 W Columbine Dr
Phoenix

Orangutan Home Services

2922 S Roosevelt St
Tempe

Parker & Sons

3636 E Anne St
Phoenix

Patterson Construction

PO Box 203
Gilbert

Paul's Ace Hardware

8449 E. McDonald Dr.
Scottsdale

Paul's Ace Hardware

1153 W. Broadway Rd.
Tempe

Paul's Ace Hardware

16605 E Palisades Blvd
Fountain Hills

Paul's Ace Hardware

1927 E. Baseline Rd
Gilbert

Peak One Builders & Restoration, LLC

7900 East Greenway Rd
Scottsdale

PEP Solar

20819 N 25th Place Suite B107
Phoenix

Perfect Cork LLC

4735 E. Halifax St.
Mesa

Pinnacle Interiors Group Inc.

10379 N 101st Pl
Scottsdale

Pino's Contracting & Home

19001 W Latham St
Buckeye

PORTER ROOFING INC.

3738 W COMMONWEALTH AVE
Chandler

Precision Air Heating Inc

3045 N Colorado St
Chandler

Priceless Construction Inc

8319 E Sage Dr
Scottsdale

Priority One Home Repair

P.O. Box 3291
Glendale

Provision Construction LLC.

24654 N.Lake Pleasant Pkwy
Peoria

R & K Building Supplies

25 W Baseline Rd
Gilbert

r and r home improvement

4939 w. ray rd #4304

R-TEK

2627 E THOMAS RD
Phoenix

Red Mountain Air Conditioning

137 East Elliot Road Ste 707
Gilbert

REDO Properties LLC.

11570 W. Alvarado
Avondale

REEis

2323 E Magnolia St
Phoenix

Republic Roofing Inc.

2853 S. Pennington St.
Mesa

Retrofoam of Arizona

1708 W Linden St
Phoenix

RKL Development

P.O. Box 7528
Cave Creek

Rounds Construction LLC

905 Monroe Avenue
Buckeye

Rucci Contracting Services

7135 E. Camelback Rd., Suite 230
Scottsdale

Scottsdale Air Heating & Cooling

1121 N Sickles Dr
Tempe

Seal Out Scorpions

124 W Orion
Tempe

Shapira Builders

3522 E Evans Dr
Phoenix

SHIPLEY & SONS CONSTRUCTION CO

16809 N 151st Ln
Surprise

Silver City Restoration

2255 W Desert Cove Ave Ste C
Phoenix

Smart Home Improvements, LLC.

3823 S. Joshua Tree Lane
Gilbert

Solar Bear

4007 W Tuckey Ln
Phoenix

Sos Exterminating - Phoenix

1240 W San Pedro St
Gilbert

Soundrite-Acoustics, Inc.

209 S. Stephanie Street

Southwest Energy Savers LLC

21001 N Tatum Blvd
Phoenix

Standard Eco

106 S Hazelton Dr
Chandler

Standard Eco LLC

106 S Hazelton Dr
Chandler

STRUT CONSTRUCTION SERVICES

2518 W TANYA RD
Phoenix

Sun Cities Home Insulation

13246 N 113th Ave
Youngtown

Sun Devil Heating And Cooling Inc

3653 N 35th Ave
Phoenix

Sun Valley Restoration

625 W Southern Ave
Mesa

Sundance Insulation & Drywall

21844 N 22nd Ave
Phoenix

T and C Remodeling

3325 W. Ocotillo
Phoenix

T M Porter Ltd

1126 West Elliot Rd.
Chandler

Tadlock Roofing

1408-3 Capital Cir NE

Takach Design & Building Services Inc.

5318 E. Le Marche Ave
Scottsdale

Terminix - Tempe

2400 W Southern Ave
Tempe

The Bailey Group, LLC

1604 E Minton Dr
Tempe

The Drywall Guy LLC

817 N Oracle
Mesa

The Other Brothers

2902 W Belmont Ave
Phoenix

THERMAL ADVANTAGE LLC

3145 E. CHANDLER BLVD
Phoenix

Trade Masters

5338 E Danbury Rd
Scottsdale

TYCOR Construction, LLC

85 W. Combs Rd
San Tan Valley

USI Mesa Insulation

1720 W Broadway Rd Ste 104
Mesa

VBS CONSTRUCTION INC

9835 N 21ST AVE
Phoenix

Warmzone

12637 S 265 W Suite 100

WellHome of Chandler

2550 N Nevada St
Chandler

WESMOR INC

120 S POMERY ST
Mesa

WILLIAMSON CONSTRUCTION, LLC

2202 NORTH 38TH STREET
Phoenix

Window World of Phoenix, LLC

2530 W Holly St
Phoenix

XLT Construction Inc

3848 W Morrow Dr
Glendale

Shop Local Insulation Services in Tempe, AZ

Tempe Zip Codes

Join Angie's List to get the best local reviews in Tempe.

What Does My Membership Include?
  • Instant access to reviews for 700+ services
  • Exclusive service discounts - up to 70 percent off!
  • Top-notch support from our live call center
How does Angie's List work?
1. Say you need a Insulation Contractor
2. Angie's List has tons of detailed, local reviews.
3. Find a winner, and book them.
4. Angie's List is there to resolve any issues.
CBS
Good Morning America
Fox News
USA Today
The Wall Street Journal
MSN money