-Find top-rated Service Providers

Find Top-Rated Las Vegas Mold Remediators

Angie's List helps you hire the best - and avoid the rest!

Mold Remediators to Avoid

68

Top Rated Mold Remediators

22

Prevent buyer's remorse with us

  • Over 3 million people trust Angie's List to help make the right choice
  • Be informed to avoid costly mistakes
  • Shop with us to ensure a fair price
  • Our complaint resolution team will help if a project goes bad
+See Verified Local Reviews

Over 1,810 reviews for
Las Vegas Mold Remediators from people just like you.

B
"I, unfortunately, will be echoing some entries from other members posted on September and June with regards to responsiveness and punctuality. This entire ordeal" was very upsetting since I had just purchased this home a few months ago and came home to a water spot on my ceiling.
Plumbing discovered the leak from the bad wax ring on the upstairs toilet and recommended ERX. It took a couple of calls to get ERX scheduled to start and I was told this would take 3-4 weeks. The crew came as scheduled and proceeded to cut the ceiling out and the floor in the bathroom. It would have been nice if the guys would have used booties, so now I have the carpets to get cleaned too. Oh Yippy! They did their work and I even bought them a pizza lunch since it was a long day. I was told that two days having the fans and dehumidifiers with ERX picking them up on Friday. I never heard from anyone, so I called
Thursday night asking when they would be here on Friday, I was given a time frame between 4-6 pm. Friday evening at 5:45 I called
and he said they should be at my home shortly. An hour later they showed up and tore down the plastic, picked up the equipment (wore booties this time, thank you) and left close to 8:00 pm. During this entire week that my house was in remediation/mitigation, they should have scheduled me with the rebuild. Instead I am notified that they are "heavily booked" and now instead of a 3 -4 weeks it turned into a 6 plus weeks and no guarantee that my home would be put back together by Thanksgiving. This was not an option, so I went with another company who will have my home complete in a couple weeks. Although I have given ERX a B rating overall, price and quality, my above situation gives them a D rating on responsiveness and punctuality making my decision to not use ERX in the future. UPDATED: November 7 - Thank you
for responding, however, please speak with your office people as this is where my information about starting between Nov 6 and 10 and not being able to complete by Thanksgiving. Your project super.,
, also confirmed the potential start dates and completion. Fabricating a review is something that I do not do.

-Fawn S.

B
"They were on time and did an excellent job. I had no complaints. I was completely satisfied. Everything is working completely well. They did what they said they" were going to do. They did it in the time they said they were going to do it. I paid them half before, half after. The estimate they gave me was $100 off on a $1400 job. So, that was satisfactory as well. I couldn’t get in touch with them once or twice. The price was okay.

-Phyllis B.

+Shop, Schedule, and Save on Services

Shop, Search and Save from anywhere!

  • Offers are exclusively provided by highly rated companies
  • Angie’s List members have access to exclusive discounts on local services
  • Shop, schedule, and stay on top of progress from any device
  • Our 30 Day Refund Guarantee means you can buy with confidence!
+Join 2 Million People on Angie's List

Over 2 million people trust Angie's List.

  • Your Membership Includes:
  • Instant access to top rated businesses covering 700+ services
  • Our Complaint Resolution Team to help when a project goes bad
  • On-the-go access to our iPhone, Android, & iPad apps
Find top-rated Service Providers
See Verified Local Reviews
Shop, Schedule, and Save on Services
Join 2 Million People on Angie's List

Local Articles in Las Vegas

Mold

Nothing strikes fear like the sight of black mold. Learn about household mold, mold symptoms, how to test for mold and the best methods for mold removal.

Angie's List
Appraisals - Real Estate, Architects & Building Design, Basement Waterproofing, Bathtub Refinishing & Liners, Biohazard Remediation, Builders - Garages/Barns/Sheds, Builders - Homes, Cabinet Making, Cabinet Refacing/Restoration, Carpentry - Unfinished, Carpentry - Woodworking, Carpet Sales/Installation/Repair, Chimney Caps, Chimney Repair, Chimney Sweep, Closets, Concrete - Leveling/Mudjacking, Concrete - Pouring & Repair, Concrete - Stamped & Decorative, Countertops, Deck Maintenance, Decks & Porches, Delivery Service, Dock Building & Repair, Doors, Drywall, Dumpster Service, Electrical, Epoxy Flooring, Excavating, Fireplaces, Floor Cleaning/Polishing/Waxing, Flooring Sales/Installation/Repair, Foundation Repair, Fountains, Garage Doors, Glass & Mirrors, Glass Block, Gutter Cleaning, Gutter Repair & Replacement, Handymen, Hardwood Flooring Sales/Installation/Refinishing, Hauling, Heating & A/C, Home Automation, Hurricane Shutters, Insulation, Land Surveying, Landscaping, Landscaping - Hardscaping & Pavers, Landscaping - Lakefront, Landscaping & Lighting, Lawn & Yard Work, Lawn Fertilization & Treatment, Lawn Irrigation, Lead Testing & Removal, Marble & Granite, Masonry, Mold Testing & Remediation, Moving, Painting - Exterior, Painting - Interior, Pest Control/Exterminating, Plumbing, Plumbing - Drain Cleaning, Pressure Washing, Radon Detection & Reduction, Remodeling - Basements, Remodeling - General, Remodeling - Kitchen & Bathroom, Remodeling - Modular & Mobile Home, Remodeling - Sunrooms & Patio Enclosures, Roof Cleaning, Roof Ice/Snow Removal, Roofing, Screen Repair, Septic Tank, Sewer Cleaning, Siding, Skylights, Stone & Gravel, Structural Engineering, Stucco, Tree Service, TV Service - Cable, TV Service - Satellite, Wallpaper Removal, Wallpapering, Window Cleaning, Window Tinting, Window Treatments, Windows, Windows - Egress, Windows - Safety & Security Film, Wrought Iron

Contractors say homeowners with this trait are the most satisfied with home improvement projects.

Many homes in humid climates are susceptible to mold growth on furniture, clothing and even structural walls if there is inadequate ventilation, says Belk. (Photo courtesy of Gold Coast Flood Restorations)
Mold Testing & Remediation

Long-term exposure to certain types of toxic molds can be catastrophic. One highly rated provider shares four easy tips to prevent mold from invading your home.

Most molds, when allowed to grow in abundance, are visibly seen in certain colors, says Cascone. (Photo courtesy of Angie's List member Teresa K. of Beachwood, Ohio)
Mold Testing & Remediation

Mold may be present in your home and affecting your life even if no actual mold is visible. Here are four things that may indicate you need mold remediation.

"While it’s entirely possible that you do have mold in your air ducts, such claims are also a common scare tactic used by some less-than-scrupulous air duct cleaning companies," Angie Hicks says.
Mold Testing & Remediation, Air Duct Cleaning

Do you have mold in your air ducts? Learn how to identify mold and remediate it, along with what you should expect to pay. Angie Hicks provides the answers.

Angie's Answers

?
Mold in a basement is a common problem. My company helps people with this every day. Some of the answers you received were helpful but not all the information is correct. First, you need to eliminate the two main ingrediants that mold needs to survive. The first one is water intrusion. This is a must. I am assuming you have no water intrusion as you make no mention. The second componant that needs to be eliminated is moisture. Moisture is also humidity. Basements need to be kept airtight in the summer months. Some folks have posted that you need air flow in your basement. Nothing could be furthur from the truth. When you open any windows for example, not one micron of air goes out of the basement, Warm humid air is sucked into the basement. Houses suck air into the basement and it meets the cool surfaces and skyrockets humidity. The windows must be kept closed and a dehumidification device installed to ensure humidity stays below 60% humidity. The dehumidifier should be energy star rated and purchasing a seperate humidity guage is a must to monitor the unit's progress. We like to keep our customer's basements at 50% humidity. This eliminates the smell that is active mold spore growth. Once the water and humidity is brought under control. Remove the organic materials that have mold on them. Walls, sheetrock and studs that have been affected. Follow the advice of previous posts as you must ensure that you do not affect the rest of the home. Once removed, install new walls using as much inorganic material as possible. We also install vapor barrier over the walls and seal the floors to stopwater vapor transmission into the basement. Poly plastic is not a acceptable vapor barrier. It is not "zero-perm" and will still allow moisture transmission. It will also crack and break into pieces over the years. A PVC liner rated "zero-perm" is the correct product in this application. Depending how large the basement is and if it is sectioned off will determine the dehumidifier strength. We use the Santa Fe line of dehidifiers as they are super energy efficiant and work like a dehumidifier on steriods. I hope this helps and I wish you the best in Basement Health!
?

Is the cabin conditioned year round or at all?

 

Are there any grading or moisture issues that are allowing bulk moisture into the crawl?

 

Conditioning the crawl is usually the best answer but if it is sporadic use and/or makes better sense to leave as a vented space, you need to do the following for optimum performance:

 

- Install a vapor barrier across the floor.  Seal all piers and penetrations as well as seal to the stem wall.

- Insulate the underside of the floor and ideally thermally break the floor joists from the earth.

- This is best accomplished by covering the floor joist with a rigid foam and sealing all the seams.

 

 

?

When you say vented to the roof, do you mean into the attic UNDER the roof, or through the roof with a duct up through a roof jack into a roof hood ? Hopefully the latter, otherwise you have the likely source of the problem.

You are clearly getting moisture in this area still, so more insulation will not help and may hurt - insulation does not stop moisture but does trap it, particularly if you add enough tht the freezing front moves well down into the insulation, so vapor coming up from the house freezes in the insulation (making it wet when it thaws) rather than venting into the attic and evaporating from there.

You need an expert check on the bathroom area - that the fan unit and any light fixtures are tighly sealed to the vapor barrier. Usually they are installed with about a 1/4-1/2 inch void all around for ease of installation, and not sealed at all, so moist bathroom air vents around themm into the attic.

Then the fan unit needs checking for openings - many have openings in the plastic or metal case from manufacturing that are not sealed but should be. Do NOT use any type of unit that, because of big lights or heat lamp, says it has to be vented and cannot be sealed in, because moist air goes right up through it.

Then the duct from the fan up through the roof needs checking for leaks (and should be insulated, at least if your attic goes below freezing ever), and should have a roof jack where it penetrates the attic - a rubber seal in a metal plate that fits tightly around the duct, so the air blown into the vent hood on the roof cannot circulate back down into the attic. Most installers just cut about a 1 foot opening in the roof (especially if they can install the duct that way without having to crawl around in itchy attic insulation), run the duct up through it into the roof hood, and walk away. That leaves that big opening in the roof sheathing for the wet air and condensation in the hood to corculate right back down into the attic. Some installers (like my house whenn I first bought it) really take the easy route and don't even connect the duct to the hood - they just terminate it a foot or so below the sheathing so ALL the moist air goes into the attic.

I would also check the kitchen and any other bathroom fans for the same leak sources or improper installation, and make sure all vent pipes are intact to above the roof, and that there are no furnace or HVAC ducts disconnected or damaged that could be adding moisture.

Also look around all roof penetrations for ducts and pipes for staining on the underside of the sheathing, which would be indicative of roof hood or jack leaks that should be repaired. (Hopefully, with a new roof you would not have any).

The area most affected should have the insulation moved away and checked to see if the vapor barrier has holes or tears, openings around pipes, ducts, light boxes or wiring, or was maybe totally torn out by some prior workman. If your vapor barrier is not effective, moist household air will move into the attic almost year around, but especially in cold weather, carrying moisture into the attic, where it will condense and cause mold.

Also - if you have a fireplace chase (wood boxout around metal chimney) in that area, it may connect to the house in the firebox area and be open to the attic (which is a real fire spread hazard but for some reason is not contrary to code), letting household air flow by that route.

The mold should be brushed and vacuumed away, then treated - there are commercial sprays that are fungicides that commercial mold and mildew removal contractors have, a sprayed chlorine bleach and borax solution has also been shown to work but you would have to have an air supplied respirator and chemical suit to work with that, which only professional remediation contractors have. Do NOT paint the area - especially the underside of the roof sheathing and trusses. They needs to be able to breathe, not have any moisture from above locked in.

Stains in the attic (assuming this is an unoccupied area) can be bleached, and then if you want the evidence to go away and make it easier to tell if there is new staining or mold, sanded to remove the worst of them.

Stains on areas visible from the outside like walls and rafters can be treated with Chlorine bleach (beware of dripping on good finishes below), painted with Kilz or similar anti-fungal primer, then painted. Stains on the underside of the sheathing visible in the soffit area can be bleached and then when dry, sanded away.

Ventilation is essential, but without removing the source of most the moisture you will not win this war no matter how many times you battle it.

While I would guess the fans and vents are the problem, is there anything different about the attic ventilation to this area versus the other parts of the roof - soffit covers, blocked eave openings, insulation-clogged bug screening or soffit cover openings, lack of air chutes or eave baffles, insulation pushed up against eave opening or up against roof, horizontal blocking that prevents or obstructs airflow, no ridge vent above it, etc ?

If you are not able to find an obvious source of the moisture, I woud consider getting a thermal IR scan of the attic. For typically about $200-300 an energy conservation expert with thermal scanner can scan the attic (might have to be done at night or VERY early morning if done in summertime, to accentuate the temp difference between house air and attic air, unless you have AC in which case turning the AC down low and blower on full can work by pushing cold air rather than hot up through any gaps or voids. If you have that done, check on price to add in the rest of the house too - probably not more than about $100 more, and can show you where your air leaks and poor insulation air. You should try to get one who can provide the entire scan to you on CD or DVD, so you can review it in the future. Here is a link to some images so you know what I am talking about -

http://www.google.com/images?client=safari&rls=en&q=house+IR+scan&oe=UTF-8&hl=en&sa=X&oi=image_result_group&ei=rhfRUci4F-TbigLghIHIAg&ved=0CDcQsAQ

?
?

Call in the professionals.

There is no sense addressing the mold issue until you resolve the basement leaks.

High ground water that is seeping into your basement is going to lead to long term, serious damage to your foundation and basement walls.  Any mold you remove will just keep coming back.  The first question is the age of the home and whether or not you have working perimeter drain tile installed.  If you home is pretty old (30+ years) it is possible you do not have a drainiage system, or the system is clogged / deteriorated beyond function.  For a newer home, perimeter drain tile was a requirement, but doesn't mean it was installed properly.

I recommend you hire a licensed architect to review your house's construction, the site and look for indications that a drainage system is in place and functioning.  They should be able to find out where the drain comes out, and to check it (after a rain or by doing a water test) to see if it is working.  If it is working, it is possible your system is undersized or only failing in a specific area.  It is also possible a second, lower water table exists that is below your current drain system.  A site change, to change the current flow of ground water or above ground water may resolve your issue as well.  Something as simple as a new drainage ditch, retention pond or higher grades around your building may resolve your issue.

Working with a professional will prevent you from worrying about a 'draingage expert' recommending a high cost repair when another option may be available.

Some drainage people will propose installing a new perimiter drain inside your basement walls.  This system gets the water that gets through the walls and under the floor, and carries it back out.  This is a last ditch idea.  The best method, to solve the issue for good, is to dig back down to your footers, repair the waterproofing on the wall, then place drainage board over it (this protects the waterproofing while allowing moisture a travel path to your drain tile).  Then place gravel fill with geo-fabric over it, then backfill.  Now, no matter how much water you have in your ground, it will be directed away from your basement.

A sump pump in the basement to handle flooding or low water tables below your basement slab will augment this system.

Once you have the moisture issue resolved, then worry about stopping mold.  In the interim, any materials that are growing mold need to be removed (use protective measures).  Make sure you run a dehumidifier at all times and keep air moving by turning on the basement hvac vents or putting some fans in the area.

Working with a licensed architect will help ensure you pinpoint the exact problem, and have a knowledgable person to discuss the options with before doing any costly work.  The architect will also be able to assist with finding contractors and overseeing that the work is installed correctly (It is worthless to redo the drainage if any one area is not done correctly).  Good luck.

?

Mold Removal reviews in Las Vegas

C

Rating
I don't remember what I used them for. It might have been when our land line went out and we needed the electrical stuff done for it. The guy tried his darndest to fix it but to no avail. he really didn't know how to fix the problem. He had to come back another day to try it again. After a total of several hours, he got some of the land line outlets to work.
I don't remember the date or the cost. I just put anything to be able to submit this survey
- george C.
A

Rating
Showed up on time with a crew of 3. Had their necessary equipment. Very professional & quick. Overall, very satisfying work. Would use their service again if needed.
- Sean I.
A

Rating
They arrived on time. Set up very quickly and started right away. Did a very thorough job, and cleaned up any splashes on to tile areas
Veryhappy with results.
- Sandra S.
A

Rating
I was very worried because I did not know the extent of the damage and what needed to be done.
Las Vegas Mold Remediators Provider Name Locked
was very calming and explained in detail the steps needed to take care of the problem. He outlined the extent of the work that might need to be done and why. There was never any pressure or scare tactics!
Las Vegas Mold Remediators Provider Name Locked
always told me when he would be there, called and confirmed before arrival, and supervised the job as he mentored other workers. It was a pleasure to watch his caring manner and professional attitude toward me and his employees.
The work was beautiful, clean up was done every step on the way. It was a pleasure to have
Las Vegas Mold Remediators Provider Name Locked
and his crew at my home. I will definitely recommend them and will use them again should the occasion arrive!
- Lynne M.
A

Rating
Two different workers performed the work. One performed all work associated with mold remediation, which included setting up the tent and blower, removing drywall and cleaning the area to remove mold spores, and removing the tent after the final mold inspection was completed. Another worker completed the remaining work, which involved repairing and painting drywall and installing and painting the new door. The new door will be more resistant to water damage on the door surface since it is constructed of steel. All work was done in a professional manner and the workers were very approachable and open to discussing anything. I received a 5% discount for being an Angie's List member.
- James D.
A

Rating
The insurance company with which I filed a claim sent out Arrow Restoration for the initial water remediation. Arrow Restoration is a subsidiary of
Las Vegas Mold Remediators Provider Name Locked
. They verified there was no moisture remaining in the damaged areas.The work was then done in stages, first roofing repairs, then mold remediation, then dry wall repairs and painting. I contracted with
Las Vegas Mold Remediators Provider Name Locked
to perform the mold remediation and dry wall repairs/painting. Each stage of the process was performed by different
Las Vegas Mold Remediators Provider Name Locked
employees. Several workers worked on the mold remediation, while a different single worker completed the dry wall repairs and painting. All work was done very professionally. The workers were very personable and friendly, especially the employee who completed the final repairs. He was very willing to share valuable information with me about home repair and maintenance. The supervisor, Ed, was very friendly and good to work with. The company never required any payment from me up front. They just scheduled and performed all the work with no payment. I ended up paying for all the work about 2 weeks after the work was finished. They did a good job in minimizing any inconvenience and completing the work in a timely manner.
- James D.
A

Rating
We bought a house that has roof leak problems and mold problems that the seller intentionally hid at the time of purchase (seller had lived in the house for 23 years and installed new drywall, texture and paint to hide the mold problem). We began discovering the problem within the first month of home ownership. We hired
Las Vegas Mold Remediators Provider Name Locked
to preform the initial mold inspection testing, the asbestos testing and the post-remediation clearance test. (Note: asbestos test is required by Nevada law in homes built earlier than a certain year before a legitimate mold remediation contractor can begin remediation work. This is to protect the homeowner so asbestos, if there is any, doesn't become airborne during the remediation work and put occupants in the home at risk. If your mold remediation company says they don't need an asbestos test they are violating the law and putting you and your loved ones at risk. There is a cost for the asbestos test but it was worth it.)
Las Vegas Mold Remediators Provider Name Locked
is very professional, was here on time - every time, and was prompt with returning reports to us. I hope I never need mold testing again but, if I do, I will absolutely call
Las Vegas Mold Remediators Provider Name Locked
. If you need this type of service, I highly recommend them.
- Laura H.
A

Rating
Description of "insurance work". Our water heater broke and there was water damage to floors and lower walls. First of all, large fans were put in place to dry out affected areas (2 - 3 days). Then came tear-out of damaged areas, during which time, the workmen worked to make sure our house could still function as a home. Not an easy task as this repair was time and labor consuming. And many, various tasks had to be co-ordinated at all times so that work continued at a steady pace. The foreman, Bill, kept it so. So did
Las Vegas Mold Remediators Provider Name Locked
in the office, as she was always understanding to current situations/turmoils. You have to understand that multiple rooms were involed: hall, linen closet, bedroom, coat closet, and foyer, and a garage area. Drywall and base boards had to be removed and then replaced with new. Painted areas had to be matched to existing areas. This was an extensive, extensive labor, encompassing over 2 weeks! I want to add this foot-note. I suffer from emphysema, so the workmen (without my request), took special care to keep drywall and other materials cleaned up continually.
- Ed & Jean C.

All Mold Remediators in Las Vegas

Companies below are listed in alphabetical order. To view top rated service providers along with reviews and ratings, Join Angie's List Now!

1st Response Restoration

86 Corporate Park Drive #100
Henderson

7 Star Enterprise

5820 Wynn Road
Las Vegas

A TO Z Inc

611 Cape Horn Dr
Henderson

A+ Pro-Tech, LLC

35 E. Horizon Ridge Pkwy
Henderson

A-Flood Control

PO Box 339

ABBOTT'S COURTESY PLUMBING

4351 Corporate Center Dr Ste 302
North Las Vegas

Advanced Pro Remediation LLC

5961 McLeod Dr
Las Vegas

All American Repair Services, Inc

5606 S. EASTERN AVE
Las Vegas

Axiom Construction & Management LLP

3960 Howard Hughes Pkwy
Las Vegas

Balinski Company

10219 Gilespie Street
Las Vegas

Bingham Construction, Inc.

1725 S. Rainbow Blvd-#16-165
Las Vegas

Bolmer Restoration

1027 S. Rainbow Blvd.
Las Vegas

C & L ENTERPRISES

3140 Polaris Ave Ste 27

CONSTRUCTION BY MIRAGE

1964 SYCAMORE TRL
Las Vegas

CORPORATE JANITORIAL CLEANING SERVICE INC.

2764 Green Valley Parkway
Henderson

Cynthia's

Las Vegas

Desert Home Inspections Inc

10474 Rustyville Ct
Las Vegas

DKI Restotech

5615 Cameron
Las Vegas

DRY VEGAS INC.

1517 Rainbow Meadows Dr
Las Vegas

E L Foust Company Inc

754 N Industrial Dr

Ecolife Development & Remodeling

9850 S Maryland Pkwy
Las Vegas

Efficient Cleaning & Restoration Services

2550 Chandler ave.
Las Vegas

Elite Restoration

60 W Mayflower Ave
North Las Vegas

Emergency Restoration Experts

2808 Synergy St
North Las Vegas

EQUITY Builders

4608 Heidi Circle
Las Vegas

Espree Mold Testing & Removal

6710 E Aire Libre Ln

Fast Restoration

3340 Topaz St #150
Las Vegas

GRAEAGLE CONSTRUCTION LLC

5016 CECILE AVENUE
Las Vegas

Guaranteed Clean Air LLC

2545 Chandler Ave
Las Vegas

H & M UNLIMITED

1791 JUNIPER TWIG AVE
Las Vegas

H2O Environmental

4435 E Colton Ave Ste 101
Las Vegas

Haner Construction

5201 Patricia Avenue
Las Vegas

HiCaliber

1330 W Sunset Blvd

Hospice of Las Vegas Inc.

8020 W Sahara Ave Ste 260
Las Vegas

ICE CARBON BLASTING

904 Blanco Caballo Way
Henderson

J & L Construction

7640 Morning Water St
Las Vegas

john the carpenter

6337 pageant street
North Las Vegas

KCP Properties, LLC

PO Box 370010
Las Vegas

L and K Environmental Services

8550 W Desert Inn Rd
Las Vegas

LaMont Faibvre

132 East Pacific Ave
Henderson

LV Plumbing Inc

500 N Rainbow Blvd
Las Vegas

LV Service Solutions, LLC

5000 W. Oakey #A2
Las Vegas

Mega Bail Bonds Sunrise Valley

921 South Rainbow Boulevard
Las Vegas

MICROLAB NORTHWEST

7609 140Th Pl NE

Miller's Water Damage and Restoration

904 River Mountain Drive
Henderson

MK House Consulting Inc

6670 Gomer Rd
Las Vegas

Mold Eliminators

1964 SycamoreTr
Las Vegas

Mold Inspectors of Nevada

8220 Garehimwe St.

Moldlab

2501 Mayes road

MSE Environmental

9811 W. Charleston Blvd
Las Vegas

Nevada Aleph Building Concepts

429 Bent Creek
Las Vegas

ODOR MASTERS

3210 Westwind Rd
Las Vegas

Primaris Construction

3315 East Russell Road
Las Vegas

Pure Construction Inc.

8342 Sunset Horizon St
Las Vegas

Quick Response

6512 N Decatur Blvd
Las Vegas

Repipe 1

15791 Rockfield Blvd Suite N

Repo Renovators

3432 N Bruce St Ste#9
North Las Vegas

Restoration Contract Services

4526 W Hacienda Ave
Las Vegas

Rudd Environmental

119 Westin Ln
Henderson

Seamingly Straight Inc

161 Kennet Ct
Las Vegas

Servpro of East Las Vegas

7330 Eastgate Rd
Henderson

SERVPRO of Southwest Las Vegas

5965 Procyon St
Las Vegas

Silver Desert Handy Man

209 S Stephanie St
Henderson

Silver State Safety Services, LLC

8032 Broken Spur Ln
Las Vegas

SOS Mold

578 Washington blvd

STEAMATIC TOTAL CLEANING & RESTORATION

2851 SYNERGY ST
North Las Vegas

Summit Restoration, Inc

5032 W. Post Road
Las Vegas

T. Stone Co.

3120 Liberty Circle South
Las Vegas

Team Tile & Stone

905 Joseph Kerwin Dr
Las Vegas

Technical Removal

10554 La Campana St
Las Vegas

Trademark Restoration Services

5980 Topaz St
Las Vegas

Two And A Half Handymen

2204 Isabelle Ave
Las Vegas

Ultimate Choice Restoration

3040 North Simmons Suite 104
North Las Vegas

Ute Construction and Arrow Restoration

3060 Westwood Dr
Las Vegas

Vegas Valley Air Duct

4593 W Desert Inn Rd
Las Vegas

Westside Restoration

6320 Hinson St
Las Vegas

Shop Local Mold Removal Services in Las Vegas

Join Angie's List to get the best local reviews in Las Vegas.

What Does My Membership Include?
  • Instant access to reviews for 700+ services
  • Exclusive service discounts - up to 70 percent off!
  • Top-notch support from our live call center
How does Angie's List work?
1. Say you need a Mold Remediation
2. Angie's List has tons of detailed, local reviews.
3. Find a winner, and book them.
4. Angie's List is there to resolve any issues.
CBS
Good Morning America
Fox News
USA Today
The Wall Street Journal
MSN money