Should I Let My Car Warm Up in the Winter?

Leave a Comment - 5

Comments

Ryan Gerth

Subject: Rapid metal expansion and

Rapid metal expansion and contraction. The piston warms up faster than the cylinder wall, which expands the piston pressing the rings against the cylinder. Then the cylinder warms up, expands causing a larger gap between the piston rings and cylinder wall. Then you lose compression, fuel passes by and you burn more oil. Plain and simple. It's the difference between a rebuild at 150-200k miles and 500k miles.

Sam

Subject: You are right

I believe the misinformation in this article and others is due to the fact that the car companies want your engine to blow up, so you finance a new car. They also know that the average person doesn't have a good understanding of thermal expansion and will blindly believe the articles that say to "start and drive immediately".

Ray Mincer

Subject: Car warm up idle

I believe you should warm your car to a full operating temperature. The reason is mechanical commonsense. The engine is small. I have been known for making things last a long time.

Mr. C

Subject: Engine warmup

Yes! I see all sorts of recommendations on not warming up due to oil and fuel but they seem to forget pistons and crankshafts (the actual moving parts) need to "come to size" along with the cams. Warm up for a few minutes and both you and your car will lasr longer.

View Comments - 5 Hide Comments

Post New Comment

 
Close
Offers <
Deals
Popular <
Answers <

Answers

?
I second the original question (still unanswered). Speaking as someone who logged in today to try to find an attorney, I see this category as one that's exactly what I have my Angie's List membership for:

1. It's important that I find a good one
2. I'm not an expert enough to know myself who is a good one
3. The industry is full of advertisements and misinformation
4. I wish I knew what experiences other people have had


?
I don't care about lawns--I planted mine in clover and don't have to mow it. When I do need to mow I use a rotary Fiskars mower, which is great--or a scythe. That's right--a scythe (the European type, which is smaller, and it's very good exercise). Gas-powered mowers, chemical fertilizers and weed killers--all nasty stuff that gets into everyone's air, soil, and water. I'm sure my neighbor doesn't like my wildflowers, semi-wild pockets of fruit bushes, and unmown areas and yes, dandelions (I have 10 acres) but that's too bad. It's better habitat for wildlife, especially the pollinators on which our food supply depends. I think this obsession with the Great American Lawn is a waste of time and resources. Plant some food instead.


?
I'm not sure Angie et. al. want you to have a complete answer to this question. By re-subscribing at the Indiana State Fair in 2012, I think I paid $20.00 per year for a multi- year subscription. Maybe even less. At the other extreme--and I hope my memory isn't faulty about this--I think the price, for my area, for ONE year was an outrageous $70.00. And they debited me automatically without warning. I had to opt out of that automatic charge. I like Angie's List, but if some of the companies they monitor behaved the way they do in this respect, they'd be on some sort of Pages of Unhappiness. I'll be interested to see if this comment gets published or censored out of existence.
?

That's very difficult to answer without seeing the house. As one poster said, the prep is the most important part. On newer homes that don't have a lot of peeling paint, the prep can be very minimal even as low as a couple or a few hundred dollars for the prep labor.

On a 100 year old home with 12 coats of peeling paint on it, then the prep costs can be very high and can easily exceed 50% of the job's labor cost.

A 2100 sq ft two story home could easily cost $1000 just for the labor to prep for the paint job. That number could climb too. Throw in lots of caullking  or window glazing, and you could be talking a couple or a few hundred dollars more for labor.

Painting that home with one coat of paint and a different color on the trim could run roughly $1000 or more just for labor. Add a second coat  and that could cost close to another $1000 for labor.

For paint, you may need 20 gallons of paint. You can pay from $30-$70 for a gallon of good quality exterior paint. The manufacturer of the paint should be specified in any painting contract. Otherwise, the contractor could bid at a Sherwin-Williams $60 per gallon paint and then paint the house with $35 Valspar and pocket the difference. $25 dollars per gallon times 20 gallons? That's a pretty penny too.

That was the long answer to your question. The short answer is $2000 to $4000 and up, depending upon the amount of prep, the number of coats, the amount of trim, and the paint used.