Angie's How To Balance Your Central Heating System

Date Published: Nov. 12, 2019

Difficulty:66%
Time: 30 Minutes

It's always annoying to set your thermostat to a perfect 73 degrees only to have one room in the house hover at a chilly 65 for no apparent reason. If uneven central heating is problem for you, it's easy to fix, although it can take a bit of tinkering. Balance your central heating system so that every room in your house is comfortable.

1CHECK FOR DRAFTS

In some cases, a room might be too cold because heat is leaking out, rather than not having enough put in. Check the windows and exterior doors in colder rooms for drafts. To do this, simply hold your hand along the bottom and sides of a closed door or window. If you feel air moving, you have a draft! Try replacing the weather stripping on the door or window and see if that solves your temperature problem.

2CLEAR THE AREA AROUND YOUR COLD AIR RETURNS

These vents do not have any flow controls on them – they only draw cold air out of rooms rather than adding heat. If they're clogged or blocked, the circular heating system in your house will be disrupted. Move any furniture, trash and dust bunnies away from your cold air returns. Wait an hour or so and see if the temperature of the room returns to normal.

3OPEN YOUR HEAT REGISTERS

Your heat register vents will have flow controls on them (generally a small lever). Open them fully in every room of the house. Set your thermostat to your target temperature and wait about an hour.

4FIND THE HOTTEST ROOM

It doesn't matter if you're trying to fix a cold room or a hot room – you want to make adjustments on the hottest room in the house. If the hottest room receives a lot of sun, wait until the sun goes down before making adjustments. Also, be sure to leave any bedroom and bathroom doors open so the flow of your heating system isn't being blocked.

5ADJUST THE VENT IN THE HOTTEST ROOM

Start by reducing the flow by half. Wait about an hour, and see if that brings the room's temperature down to the target level. If it doesn't, reduce the flow by half again. Repeat as many times as necessary.

i

Tip: If you want to be exact, use a room thermometer to get a more accurate reading.

6MOVE TO THE NEXT HOTTEST ROOM

Repeat step #5 for the next 1-2 hottest rooms in the house. If you had a problem with a cold room, check that room's temperature again. Lowering the heat in the warmest rooms should free up some spare heat that will now be flowing into your cold room. Problem solved!

What is Angie's List?

Angie’s List is the trusted site where more than 6 million households go to get ratings and reviews on everything from home repair to health care. Stop guessing when it comes to hiring! Check Angie’s List to find out who does the best work in town.

Local Discounts

Daily deals up to 70% off popular home improvement projects from top-rated contractors on Angie’s List!