How Much Does Well Drilling Cost?

3 pros!
On average, it may cost $6,000 to $7,000 to drill a 300 foot well. This cost covers drilling alone.
Water wells remove water from an underground aquifer. The most common method is drilling which is a slightly complicated and expensive procedure.
Why Does Water Well Drilling Cost Vary?
It varies according to the depth of the well being dug, type of well and difficulty of the material being drilled through (commonly sand, clay or solid rock).
The process of drilling a well includes adding a casing and a tight-fitting well cap - this installation costs $15 to $30 per foot. However, if the material is difficult to drill through, it can cost $30 to $50 more per foot. In some instances, the installation of a casing can be twice as much as the drilling of a well.
In well drilling, a water system is needed afterwards. The system includes a well pump to bring up the water (pictured above), a storage tank and piping to take the water into the house, electrical wiring and a control panel. These water systems cost between $2,000 to $8,000 depending on the size of the pump and the distance from the well to the house.
Normally a well is drilled and charged separately from the pump installation. If a homeowner is on a tight budget, the well can be drilled first in some cases and the pump system installed later.
Location
Several factors influence the location of a well. The best way to determine the right location is consultation with an expert. The following tips are guiding factors:
- Do not drill wells close to utility lines or septic systems. 100 feet away is the most appropriate distance.
- An evaluation should be carried out on the appropriate location to ensure the well is not exposed to sewage systems.
- There are dedicated companies that install wells and water pump systems: LOCAL WATER WELL COMPANIES
Well Depth
An approximate estimate on the cost is determined when a pro inspects the area and rock formation. We recommend finding three estimates to ensure a competitive price. The depth of a well will also determine the amount of casing. This casing prevents unwanted contaminants from seeping into the well.
A typical well is between 200 to 800 feet deep. The depth of a well cannot be determined without a prior examination of the site.
Cost of a Pump
A homeowner should choose a pump that meets water usage needs. Pumps average between $100 to $1,200 on the high end. Shallow pumps average $1,000 to install and deep well pumps cost around $2,000.
Submerged installations may need extra wiring and piping costing $100 to $200. Consultation with an expert is needed to determine the best pump according to budget, efficiency and durability. Get three reviews and check all online resources and reviews before contacting any companies.
FIND YOUR LOCAL ANGIE'S LIST: WATER WELL & PUMP COMPANIES HERE