-Find top-rated Service Providers

Find Top-Rated Tomahawk Insulation Contractors

Angie's List helps you hire the best - and avoid the rest!

Insulation Contractors to Avoid

48

Top Rated Insulation Contractors

13

Prevent buyer's remorse with us

  • Only 21% of Tomahawk Insulation Contractors are reliable
  • Tardiness is the #1 complaint against Tomahawk Insulation Contractors
  • Shop with us to ensure a fair price
  • Our complaint resolution team will help if a project goes bad
+See Verified Local Reviews

Over 3,416 reviews for
Tomahawk Insulation Contractors from people just like you.

A
"Initally we were not considering an insulation project we were focused on new windows. We had Gerorge from O'sullivan installs giving us a quote on windows" and I was showing him some of the tempature variances throughout the house. He suggested having the house properly insulated. He referred me to
at
. I called him at 11am (with
) and he was at my house at 4pm (not common for most contractors). I could write a book about how FREAKIN excellent this guys were.
provided me a great education on insualtion. He convinced me to avoid mass save which I am glad I did. I paid more to have
do my job because I did not get the mass save $$, however the work was done masterfully. What you pay for it is what you get. Couldn't be happier with
and his team. If you are reading this review and considering
it is a no brainer.
thank you for everyting you were one of the best contractors we have every worked with. If you read this review call me I want to insulate the crawl space where our water pipes are located before the freezing cold comes in about a week. Thanks Again! The crazy family of 5 in
!

-Ari W.

A
"
responded immediately and came to give me an estimate for attic insulation. He explained the options and cost for each. He and his crew" did a great job on the day of installation. They were professional, thorough and completed the job quickly. They cleaned everything up and even put boxes back up in the attic for me. They did a great job! I will definitely recommend
to everyone!

-Becky C.

+Join 2 Million People on Angie's List

Over 2 million people trust Angie's List.

  • Your Membership Includes:
  • Instant access to top rated businesses covering 700+ services
  • Our Complaint Resolution Team to help when a project goes bad
  • On-the-go access to our iPhone, Android, & iPad apps
Find top-rated Service Providers
See Verified Local Reviews
Join 2 Million People on Angie's List

Local Articles in Tomahawk

snowy house

The Angie's List Guide to Winter Maintenance

It's the time of year when the winter weather can take a toll. Follow this winter maintenance checklist to protect your home, your car and your health.

Without proper insulation and venting in your attic, icicles can form on your eaves, leading to a damaging ice dam on your roof, says Neubecker. (Photo courtesy of Angie's List member Donna B. of Mendota Heights, Minn.)

Avoid ice dams with proper attic insulation

Do you have icicles forming on your eaves and gutters and ice collecting on your roof? An ice dam can cause serious problems without proper insulation.

Even in cold-weather climates, homes often lack insulation between the finished, occupied portion of the home and the ground. (Photo courtesy of Angie's List member Paul B. of Bluffton, South Carolina)
Insulation, Energy Efficiency Auditing

Exterior foundation insulation is an often overlooked home improvement. It can help stop drafts, lower energy bills and keep your house warmer during winter.

Angie's List
Appraisals - Real Estate, Architects & Building Design, Basement Waterproofing, Bathtub Refinishing & Liners, Biohazard Remediation, Builders - Garages/Barns/Sheds, Builders - Homes, Cabinet Making, Cabinet Refacing/Restoration, Carpentry - Unfinished, Carpentry - Woodworking, Carpet Sales/Installation/Repair, Chimney Caps, Chimney Repair, Chimney Sweep, Closets, Concrete - Leveling/Mudjacking, Concrete - Pouring & Repair, Concrete - Stamped & Decorative, Countertops, Deck Maintenance, Decks & Porches, Delivery Service, Dock Building & Repair, Doors, Drywall, Dumpster Service, Electrical, Epoxy Flooring, Excavating, Fireplaces, Floor Cleaning/Polishing/Waxing, Flooring Sales/Installation/Repair, Foundation Repair, Fountains, Garage Doors, Glass & Mirrors, Glass Block, Gutter Cleaning, Gutter Repair & Replacement, Handymen, Hardwood Flooring Sales/Installation/Refinishing, Hauling, Heating & A/C, Home Automation, Hurricane Shutters, Insulation, Land Surveying, Landscaping, Landscaping - Hardscaping & Pavers, Landscaping - Lakefront, Landscaping & Lighting, Lawn & Yard Work, Lawn Fertilization & Treatment, Lawn Irrigation, Lead Testing & Removal, Marble & Granite, Masonry, Mold Testing & Remediation, Moving, Painting - Exterior, Painting - Interior, Pest Control/Exterminating, Plumbing, Plumbing - Drain Cleaning, Pressure Washing, Radon Detection & Reduction, Remodeling - Basements, Remodeling - General, Remodeling - Kitchen & Bathroom, Remodeling - Modular & Mobile Home, Remodeling - Sunrooms & Patio Enclosures, Roof Cleaning, Roof Ice/Snow Removal, Roofing, Screen Repair, Septic Tank, Sewer Cleaning, Siding, Skylights, Stone & Gravel, Structural Engineering, Stucco, Tree Service, TV Service - Cable, TV Service - Satellite, Wallpaper Removal, Wallpapering, Window Cleaning, Window Tinting, Window Treatments, Windows, Windows - Egress, Windows - Safety & Security Film, Wrought Iron

Contractors say homeowners with this trait are the most satisfied with home improvement projects.

With insulation technology always advancing, you’ve got choices to make when it comes to the material you pick, says Lindus. (Photo courtesy of Angie's List member Lynn M. of Columbus, Georgia)
Insulation

Thinking of installing your own insulation? One highly rated provider shares six things that every homeowner should be aware of before attempting to DIY.

Before winter arrives, ensure your attic is sealed properly and has both adequate insulation and ventilation. (Photo courtesy of member Kitty Jones of Columbus, Ohio)
Insulation, Heating & A/C, Roofing

A comfortable, energy efficient home starts at the top. Those hot spots and cold rooms may relate to problems in your attic. Beyond adding insulation, what's a homeowner to do?

Angie's Answers

?

Google and read about it. Some people swear by it, though their comments sound suspiciously like they were all written by the same person. Some call it a rip off - expecially people paying $6000-8000 for what would normally be a $1,000 range job.

I would not call it an outright fraud as they are providing a product that has some potential merit in the right application, but from a technical standpoint it sounds suspicious. They claim a 1/4 mat with doiuble sided foil facing is R-16 insulation. This at least is deceptive - they appear to be saying its radiant heat reflective properties give the equivalent of R-16 insulation, because there is NO WAY 1/4" foam is going to yield R-16 in an ASTM test for insulation, which is a thermal conductivity test. Would be lucky to get R-2 or so as an insulator, so this is basically a radiant barrier. Competing products from national brandname manufacturers list R value of 3.8-4.2 for one inch mats, so the equivalent for this 1/4" mat would be expected to be in the R1 range.

Properly installed, with ventilation on BOTH sides, it can be slightly effective in reducing radiant heat loss from the house, and more effective in reflecting heat in the attic from coming down into the house. However, from a thermodynamic and vapor control standpoint, they are trouble unless their integration into the house envelope is designed VERY carefully. Short explanation:

1) for keeping heat in the house, if they are installed above the attic floor insulation they can slightly limit air loss through the ceiling, and reflect radiant heat back down, resulting in warmer insulation, hence a warmer ceiling - but not as marked an improvement as added insulation would give.

2) for keeping attic heat from getting into the ceiling, they do reflect back a good portion of the radiant heat coming from the roof sheathing. This reduces the attic floor insulation surface temperature, so can reduce air conditioning cost. it does increase teh temperature in the attic, which can be very bad for support timbers and the roof sheathing.

3) the worst thing about how this type of foil radiant barrier is used is that, unless it has free air space on both sides, it acts as a vapor barrier. In the typicall application as a blanket over attic floor insulation, it traps any moisture coming up from the house, and can cause mildew and rot, especially in climates where the outdoor temperature gets quite cold.

4) the attic fans are generally a last resort measure - the normal house does much better, at no energy cost, using ridge vents with adequate eave openings to provide ventilation and cooling in the attic.

5) their effectiveness in winter heat diminshes rapidly with time - tests of attic radiant barriers show they lose about half their effectvieness within 5 years, because even a light dust coating greatly reduces their ability to reflect radiant heat, and greatly increases the absorption of heat from the hot air above them.

6) pay attention to cost - from what I see, their installed cost is many times the cost of normal insualtion or radiant barrier placement.

I would say, in summary, buyer beware, and I would be inherently leery of a product being sold the same way timeshares and "secret" moneymaking schemes are.

?

Obviously this is not a timely response to the initial question. However, for those who may be reading these answers at a later time, a couple of added thoughts:

1) the radiant barrier being discussed is basically heavy-duty metal foil or metallized surface on a plastic sheet, intended to reflect RADIATED heat (infrared radiation - think heat light, or heat you can feel at a distance radiated from a fireplace), the same way a mirror reflects light. Radiated heat is how a standard oven broils and how steam and hot water baseboard heat predominately work.

2) you generally should do NOT place a radiant barrier over the insulation that lies between and over the joists in a normal attic, especially in a region where the attic temperature can frequently reach condensation temperature (below about 45-50 degrees) - it may reflect back some of the house heat that is coming up from the house, but by destroying most of the temperature gradient from the house to the attic air destroys much of the driving force that moves moisture to the attic air and subsequent venting. Between that greater heat and the fact the barrier is also a moisture barrier, that makes a perfect condition for mold and rot in your insulation and attic wood, and has become quite an issue in energy upgraded homes because of retrofits that cut off airflow outside the insulation, but do not cut off the moisture source leaking thorough from the house. The proper and ONLY place for a vapor barrier in a normal attic insulation system is on the pressurized and normal warm, humid side of the insulation zone - directly above the ceiling drywall in the top floor, fastened to the UNDERSIDE of the ceiling joists or trusses, NOT anywhere above that. Perforated barriers are supposed to reduce this tendency, but the perforation area percentage is so small that typically they still act as a vapor varrier, just not a totally effective one.

3) radiant barriers reflect radiated heat ewith up to 99% efficiency but have basically zero resistance to CONDUCTION (body to body heat transfer at points of contact - think heat transfer from your warm hand to a frozen cold drink can, or hot pavement heat transfer to the bottom of your feet) - so there needs to be an air gap between the radiant barrier and the hot item passing the heat to it, otherwise the heat will just pass through it by conduction. Therefore, applying it directly to the sheathing (above or below) or manufacturing it directly on the surface of the sheathing defeats its purpose, even though this is commonly done.

4) there is a lot of discussion, particularly in the professional design community, about attic radiant heat barrier effectiveness and problems. Because they are being installed on the bottom of the sheathing or underside of roof joists, they act as a heat trap for the energy being conducted through the roof which would normally radiate into the attic air or be transferred by CONVECTION (fluid flow heat transfer) to the attic air, and be vented through roof vents, ridge vents, gable vents, etc. By trapping that heat, they are causing the underside of the shingles and particularly the felt and sheathing to get a lot hotter than they otherside would, essentially changing it from a system where the shingle top surface might reach 120-180 F and the inside surface of the sheathing about 80-140F in the summer, to making the entire roof system equal to the outside surface temperature. This causes more rapid shingle deterioration and cracking, and makes the felt or plastic moisture barrier under the shingles brittle and subject to failure.

Also, any moisture above the radiant barrier (from roof leaks or humid air coming into the area) is prevented from evaporating by the attic airflow which would normally remove it, so it starts acting like a steamer. I have seen both wood and metal lofts and attics become a major mold farm in months because of this effect, and a couple of roofs which started sagging due to rotted sheathing within 2 years of reroofing with tightly adhered radiant barrier. Some radiant barriers are vapor-permeable to reduce the moisture issue, many are not, but few actually are effective in letting moisture freely escape.

Having seen these products in use, and having analyzed and specified building products for use from the Middle East to the Arctic for decades, and having a Masters in Arctic Engineering (a degree predominately in energy conservation and heat flow), my personal opinion is that these radiant barriers will be banned by code within 10-15 years for unheated (so-called "cold" roofs) roofs, because they just do not use the principles of thermodynamics correctly. For more info on this issue Google the following search phrase  - moisture trapping by radiant attic barriers       and read the government (not the manufacturer) literature on the issue.

5) Unfortunately, the right way to handle this issue is to put the radiant surface on the OUTSIDE of the house - by using reflective materials on the roofing material. This is already done with flat roofs, house trailers, and industrial structures by spraying with alumiunum paint, and a few brands offer reflective aggregate shingles that are slightly more reflective and radiant than normal shingles. People obviously do not like this reflective surface from an aesthetic standpoint, though with solar cells coming into more general use this may soon be more widely adopted. The idea should be to keep the solar energy from penetrating into the building envelope at all, not try to re-reflect it away after it has penetrated throguh the roof system.

The sprayed-in foam has a couple of issues you need to be aware of:

6) it needs to be the low-pressure expanding type mixed for use around window frames, as fully expanding foam can bow joists or trusses and pop drywall ceilings free as it expands, and non-expanding foam actually shrinks as it cures, leaving gaps for air and heat flow alongside the ceiling joists.

7) being closed-cell it is essentially impervious to moisture, so the vapor barrier on the house side has to be EXCELLENT (incuding sealingof all penetrations), or it will trap household moisture escaping into the attic and promote mold and rot in the ceiling drywall and joists.

8) it tends to bleed chemical fumes into the house for a long period of time (can be noticeable for years), which may be objectionable to some people from an odor or environmental standpoint, and especially should be considered if any residents have severe allergy issues or respiratory problems.

9) I emphatically recommend AGAINST use of sprayed-in foam between ceiling joists or truss members in any area that can have cold attic air that could cause moisture condensation in the insulation, though this is probably not a significant problem where you live, assuming your Dallas is the city in Texas. For essentially year-around air-conditioned homes in hot climates, the problem can actually be condensation of attic air moisture on and in the colder ceiling surface insulation and on cold attic runs of air conditioned air, so attic ventilation becomes a critical issue to remove the moisture before it condenses.

In summary, having seen an awful lot of attic moisture and thermal problems, my personal recommendation would be to ensure excellent sealing of the house from the attic, use normal UNFACED fiberglass insulation, and instead of a radiant barrier ensure adequate full-attic ventilation. If you decide to got with a radiant barrier, then I would recommend a perforated one, sloping up towards the sides a foot or two and stopping a foot or so clear at the sides so moist air under it can escape to the roof joist spaces and be vented from the attic. I have seen this done several times with a fine nylon net strung above the insulation in the attic, supporting the barrier, resulting in something very similar to the double-roof system used in bedouin tents, where airflow between the two layers keep the hot air away from the living space.

?

A couple of comments about what Jim said:

1) Regarding type of insulation, in cold winter environments: Cellulose and fiberglass are actually about comparable in R value when installed - blown in cellulose runs from 3.2-3.8 R value, fiberglass batt 2.9-4.3 R value depending on manufacturer and whether hig-density or low density, high-efficiency or standard, according to official Department of Energy publications. Measured values in attic test cases, in areas with a true winter, after 10 years showed a decrease from 3.4 (in the test case) down to 2.1 for cellulose, and 3.5 to 3.3 for fiberglass batt, due to packing or matting. In an attic environment, there WILL be condensation or frost on the insulation at some point during the year (assuming an area with true winters) and in highly insulated houses commonly for a substantial time period each winter. Fiberglass packs down slightly from that weight but mostly rebounds, cellulose packs down and mats and does not substantially recover, so over the years cellulose loses 1/3 to close to 1/2 its insulation value, fiberglass about 10%.

2) a note on radiation barriers attached to the bottom of the rafters - there are a lot of installers and homeowners making two major mistakes with this product that can cause major trouble: First, be sure to terminate it short of the eave openings. I have seen cases where it was carried all the way out to the fascia board, thereby blocking all airflow on the underside of the roof. Even carrying it all the way to the eaves along the bottom of the rafters will block off ventilation to the main attic area. You have to leave the air space between the rafters open to full airflow from the soffit/eave area ot the ridge vent. Second, do NOT run it continuous from eave to eave across the full width of the attic - leave a gap about a foot wide under the ridge vents so warm and moist air in the attic can vent through the ridge vent. Closing the ridge vent area off with the radiant barrier effectively puts a vapor barrier around the main attic area, causing retention of the moisture which WILL accumulate there, promoting mold.

?
Steve made a good point.  Also, while it isn't required to remove the old insulation you can check the ductwork, wiring, etc. with the old stuff removed,  You can also spray foam around all openings and holes in wall top plates to better seal your home as Steve was pointing out.  My concern is the potential for mold spores you mentioned in your question.  If you suspect there are any get a good company in to remove the old and clean the attic.  Another concern is asbestos.  Your home is old enough you could have it in there and that's worse than mold if released into the air.

Todd Shell
Todd's Home Services
?

Have you checked Angie’s List? Angie’s List Answers is a great place to find advice from professionals, but for ratings, reviews and information to help you hire the companies you need, visit www.angieslist.com today.

 

 

?

Insulation reviews in Tomahawk

A

Rating
I cannot say enough good things about
Tomahawk Insulation Contractors Provider Name Locked
. He is the dream contractor. We called him for an estimate and he came out in a timely manner and showed up at the exact time he said he was going to be here. He explained thoroughly what insulation would benefit us the most and what places to put it. He laid out exactly what our rebate from the gas company would be and he even filled out the paperwork for us!
When the time came for the work he once again showed up at the exact time he said he would be here. He did all of the work that he quoted us and did an amazing job. We noticed an instant difference in our basement after the work was done. He cleaned up all of the insulation mess and left our basement clean.
His work is meticulous. I wish every contractor that I worked with was like
Tomahawk Insulation Contractors Provider Name Locked
.
- Chad D.
A

Rating
We had originally considered using a considerably less expensive contractor who would have blown cellulose over the existing fiberglass. That seemed sensible and may have been sufficient, but over the years the fiberglass had provided a comfortable nesting ground for mice. I also thought it would have been almost impossible to do a thorough job sealing air leaks without removing the old insulation.
I'm glad we chose
Tomahawk Insulation Contractors Provider Name Locked
. It's a family run business.
Tomahawk Insulation Contractors Provider Name Locked
, the owner, gave a very well informed presentation when we met. I had become somewhat of an insulation geek and found
Tomahawk Insulation Contractors Provider Name Locked
's approach very much aligned with high industry standards. One of the things that impressed me during the interview was that he said he paid his employees well and provided benefits. Given the quality of his crew, I suspect that is true.
The job was done in two stages - first the attic and then later the outside walls. We are not the original owners of the house and were shocked to find out that only 1/3 of the stud bays had insulation in them!
The crew was very professional. They are skilled, well-trained, and meticulous. It was obvious they took pride in their work. They were very careful about keeping our house clean as they worked, and they thoroughly cleaned up at the end of each day.
Our house is more comfortable than it has ever been in the winter. We recently had a few days when the temperature crept up to the low 30's. It was gratifying to see that snow remained on our roof while the snow had melted on the majority of homes in our area. We have not developed ice dams, and no icicles have formed.
The project was costly for us but worth every penny!
- Hugh T.
A

Rating
Tomahawk Insulation Contractors Provider Name Locked
and his crew did an amazing job cleaning, rodent proofing, sanitizing and insulating the attic. They arrived on time, got started immediately and were very professional. I was shown pictures after the attic clean up and rodent proofing I also went up to the attic to see the results of the new insulation. They did an amazing job cleaning up after themselves. I would highly recommend their service to all my friends.
- Virginia R.
A

Rating
Everything went very well. The crew was professional and they did a great job cleaning up afterwards. We had an issue with the de-humidifier not working properly when it was first installed but they were very quick to address the issue and got it working. They did a follow up visit as promised 8 weeks after installation to ensure everything was continuing to function as expected. We would not hesitate to use
Tomahawk Insulation Contractors Provider Name Locked
again for any future projects.
Tomahawk Insulation Contractors Provider Name Locked
,
Tomahawk Insulation Contractors Provider Name Locked
, and the entire crew were a definite pleasure to work with.
- Sametta G.
A

Rating
The salesperson came in and spent over three hours analyzing the entire house for problem areas involving the original insulation. It was a very technicial evaluation and professionally done. Each of the findings was demonstrated and explained in detail. He also pointed out where the existing home insulation was currently doing its job.
The main deficient areas included the family room (lower crawlspace and cathedral ceiling areas), garage area, basement perimeter area, and the attic area above the main part of the house. I got two other estimates and neither one was as comprehensive as
Tomahawk Insulation Contractors Provider Name Locked
's approach, nor as technically evaluated.
The work crew was very professional and obviously well trained. They explained each activity before they started it and, after they finished each piece of the project, asked if I would like to inspect the crew's work. Both the production supervisor and assistant production supervisor should get a pay raise--they were that good and very customer oriented. The entire crew was well oriented to their task and well supervised.
I am very pleased with my entire experience with
Tomahawk Insulation Contractors Provider Name Locked
.


- Tomme C.
A

Rating
.They were on time clean & very professional & fast. Was done on a cold day & the front door had to be open, so they got it done quickly, with no mess.
- Ray J.
A

Rating
They showed up on time, worked hard, and completed the job ahead of schedule. They did a great job cleaning up every day and were very pleasant.
- Rosemary D.
D

Rating
The job was scheduled for October 1st, 2014 however when
Tomahawk Insulation Contractors Provider Name Locked
and
Tomahawk Insulation Contractors Provider Name Locked
arrived to begin the job, they found the man (
Tomahawk Insulation Contractors Provider Name Locked
) had not measured the door properly and had not taken into account that there were electrical sockets on both sides of the window wall that needed to be cut in order for the new door to fit..
Tomahawk Insulation Contractors Provider Name Locked
contacted the office and told them of the problem. He was told they would have to send an electrician out to move the wires. Electrician came out that day and cut the wall and relocated the wires. He nailed a piece of green dry wall on both sides of the windows and stated he would be back to finish the wall. The door was installed on Oct. 7th, 2014 but the electrician did not return to finish the wall. I contacted my sales man
Tomahawk Insulation Contractors Provider Name Locked
Wratton on Oct 22nd and told him that the kitchen dry wall was not finished and that the bottom sill of the frame of the door was too high and not flat to the floor. This high
Tomahawk Insulation Contractors Provider Name Locked
, bottom frame, bottom sill whatever you want to call it would cause a person to trip over the bottom of the frame and hurt themselves. He stated that he would check with his manager. Then Oct, 27
Tomahawk Insulation Contractors Provider Name Locked
was sent out to take a picture of the dry wall kitchen wall. I told him my concern and his reply was that
Tomahawk Insulation Contractors Provider Name Locked
windows is having the same problem. I wondered why he was sent to take a picture of the wall. Didn't they know the wall was cut to relocate the wires?? On November 10th, the electrician came back to finish the wall. I told him about my concern and he said he understood and he too said he would take my concern to his manager.
I sent an e-mail to my salesman,
Tomahawk Insulation Contractors Provider Name Locked
Wratton going over the whole story again and I stated since no one seems to have an answer about the door, here is my request: I wanted them to give me credit for this door( $ 5,613.00) and replace it with a French door which would give us more opening room to get out and the base of the door would not cause a person to trip. This e-mail was dated Nov. 17TH, 2014. He replied, he would talk to his manager.
On December 16, 2014 I sent
Tomahawk Insulation Contractors Provider Name Locked
De
Tomahawk Insulation Contractors Provider Name Locked
(you) a certified letter with return receipt. I included in this mailing, the e-mail and the very positive review I wrote in 2012 about the excellent customer service I received from salesman
Tomahawk Insulation Contractors Provider Name Locked
and the excellent service from
Tomahawk Insulation Contractors Provider Name Locked
and his crew. You called me when you received the letter and left a message on my phone that I would be hearing from the company within 48 hours.
I did hear from a salesman December 29th soliciting additional business from me and as before, I told him my story and he asked me to wait until after the holiday before I wrote the complaint on Angie's List and he too said he would check on this and told me I could receive $250.00 for a referral. What a terrible difference two years has made in customer service and how despicable you treat your repeat clients.. No more!!!
- Phyllis H.

All Insulation Contractors in Tomahawk, WI

Companies below are listed in alphabetical order. To view top rated service providers along with reviews and ratings, Join Angie's List Now!

A-A Exteriors

N2575 Orchard Way
Waupaca

A-Rite Construction LLC

4202 County Hwy WW
Wausau

All Around

701 Decatur Ave N

ALPINE INSULATION

1941 ASHLAND AVE
Sheboygan

American Home Shield

889 Ridge Lake Blvd

American Weathermakers

341 Anthony Trl

Armor Shield Metal Roofing

1082 Coronado Ct
Green Bay

B&B Contracting LLC

6532 County Rd H
Athens

Badgerland Exteriors

231 Water St
Sauk City,

Badgerland Restoration & Remodeling

701 Industrial Dr
Waupaca

Blaze Insulation

N 859 Dietrich Dr
Campbellsport

Burbach Insulation Company Inc

16330 W Glendale Dr
New Berlin

Conradt Custom Construction

518 W Fulton St
Waupaca

COUNTYWIDE REMODELING LLC

4114 county road CR
Manitowoc

CustommadeCo.

7261 Commerce Plaza Dr
Neenah

Dave Nicholson Construction Inc

617 Eighth Ave
Antigo

Dehling Voight, Inc

PO Box 199
Newburg

E & J Builders

229 N Superior Ave
Tomah

Exterior Touch Inc.

12610 Waverly RD.

Fred Marasco Drywall And Construction

403 S.Cedar ST./po box 243

Genteman Construction LLC

N3695 Robin Avenue
Granton

Hardy & Jensen Inc

6525 Washington Ave
Racine

home repair shops

1908 Webster st
Merrill

Koeller Builds Plus LLC

786 Oak Road
Kronenwetter

Kulp's of Stratford LLC

C1891 State Hwy 153
Stratford

L & L Custom Exteriors & Construction

N14926 Wilderness Ave
Thorp

Lake State Roofing Inc

4101 N. Stephenson Ave.

LiteHouse Insulation

1514 190th Ave. #2C
Balsam Lake

M-J Roofing

625 Wilson St
Tomahawk

Property Image LLC

PO Box 44181
Madison

Quality Energy Experts

p.o box # 395
Mauston

Rock & Tait Roofing LLC

529 2nd St
Hudson

Saunders Insulation

201 E. Winslow Rd

SCHEFFEL CONSTRUCTION/RESTORATION

N6644 MACKEY RD
Springbrook

Seagull Enterprises

2410 Plymouth Ave
Janesville

Solar Pro WI LLC

1213 Melby Drive
Madison

T.H.I.S

675 Ridge Rd
Mosinee

The Millwork Masters LLC

1827 33rd St
Kenosha

Theilman Home Improvements LLC

4800 US Highway 8 Beltline
Rhinelander

Tim Brown Construction

422 3rd St W
Ashland

Turner Home Improvements

2525 34th Street
Kenosha

Warmzone

12637 S 265 W Suite 100

William Greely Custom Builders

2307 E 9th st
Superior

Wisconsin Roofing Systems

156 Sunrise Dr
Stevens Pont

Woodland Painting Company

7411-95th Ave
Kenosha

Shop Local Insulation Services in Tomahawk, WI

Tomahawk Zip Codes

Join Angie's List to get the best local reviews in Tomahawk.

What Does My Membership Include?
  • Instant access to reviews for 700+ services
  • Exclusive service discounts - up to 70 percent off!
  • Top-notch support from our live call center
How does Angie's List work?
1. Say you need a Insulation Contractor
2. Angie's List has tons of detailed, local reviews.
3. Find a winner, and book them.
4. Angie's List is there to resolve any issues.
CBS
Good Morning America
Fox News
USA Today
The Wall Street Journal
MSN money