-Find top-rated Service Providers

Find Top-Rated San Marcos Insulation Contractors

Angie's List helps you hire the best - and avoid the rest!

Insulation Contractors to Avoid

156

Top Rated Insulation Contractors

23

Prevent buyer's remorse with us

  • Over 3 million people trust Angie's List to help make the right choice
  • Be informed to avoid costly mistakes
  • Shop with us to ensure a fair price
  • Our complaint resolution team will help if a project goes bad
+See Verified Local Reviews

Over 12,492 reviews for
San Marcos Insulation Contractors from people just like you.

A
"This was a great deal! I recently bought an older home, with a secondary house on the same lot. Both of these units were not insulated and I expected to have to" pay a great deal of money to get this done. The Deal offered here was for 1000 sq feet, and
was able to let me allocate my unused square footage towards the back house, and provided the remaining square footage need to complete the back house at a reduced rate. His team arrived the next day and they were courteous and mindful of my pets' needing to be kept penned and the doors kept closed (I just moved in and was nervous the animals might try to bolt with strangers in the house). After the work was done I saw no evidence of any stray material or debris left behind. The work itself was very quiet (I had imagined it would be a really noisy process). And, they were really quick too!
called me today to check on my satisfaction...when does that ever happen??!! I was pleased to tell him that my house was freezing cold this morning!!!

-Mike S.

A
"I had several contractors come to the house to give me an estimate. They wanted to replace ALL of my crawlspace insulation with estimates above $2200.00 and quite" frankly they seemed a little sketchy. They wanted a 50% deposit immediately and I felt a little uncomfortable handing over $1000 plus dollars to someone that I couldn't even research on the web. I contacted
because they had been in business for over 50 years as a family owned and operated company.
came out to the house within 2 days and was promptly here when he said he would be. He did a thorough inspection of my crawlspace and said that I needed some repairs, but not all of the insulation was bad. He wanted to reattach some of the old insulation and replace the insulation that was actually bad. I also wanted to replace my contractor grade vapor
. His estimate was less than $800 and he used an upgraded 10 mil vapor
(it happens to be white in color and really spruced up the appearance of the crawlspace as well). His three man crew showed up when promised and immediately went to work. It was a very hot day and my crawlspace is very low, so this was a very difficult job to say the least. The young men were very respectful and hard workers. They were the type of guys that you could give full access to your house and you would have no worries at all. I would not hesitate to recommend
and I would certainly use them again.

-CYNTHIA C.

+Shop, Schedule, and Save on Services

Shop, Search and Save from anywhere!

  • Offers are exclusively provided by highly rated companies
  • Angie’s List members have access to exclusive discounts on local services
  • Shop, schedule, and stay on top of progress from any device
  • Our 30 Day Refund Guarantee means you can buy with confidence!
+Join 2 Million People on Angie's List

Over 2 million people trust Angie's List.

  • Your Membership Includes:
  • Instant access to top rated businesses covering 700+ services
  • Our Complaint Resolution Team to help when a project goes bad
  • On-the-go access to our iPhone, Android, & iPad apps
Find top-rated Service Providers
See Verified Local Reviews
Shop, Schedule, and Save on Services
Join 2 Million People on Angie's List

Local Articles in San Marcos

Avoid Ice Dams With Proper Attic Insulation

An ice dam can cause serious problems to your roof without proper insulation.

By properly insulating your attic you can keep warm air from escaping and save money on your energy bills. (Photo courtesy of Vinay S. of North Brunswick, New Jersey)
Insulation

Hot air rises … but good insulation can keep your energy costs from doing the same thing.

Better air quality, quieter living spaces, comfort and better health are all reasons to reconsider your insulation choices. (Photo courtesy of Angie's List member Roseanne J. of Seattle)
Insulation

Not just for new construction, learn how foam insulation can be placed inside existing walls to make your home more comfortable.

While traditional fiberglass insulation is affordable and efficient, injection foam insulation can offer even more benefits. (Photo by Summer Galyan)
Insulation

Insulation isn't sexy, but it can keep you cool at night.

Angie's List
Appraisals - Real Estate, Architects & Building Design, Basement Waterproofing, Bathtub Refinishing & Liners, Biohazard Remediation, Builders - Garages/Barns/Sheds, Builders - Homes, Cabinet Making, Cabinet Refacing/Restoration, Carpentry - Unfinished, Carpentry - Woodworking, Carpet Sales/Installation/Repair, Chimney Caps, Chimney Repair, Chimney Sweep, Closets, Concrete - Leveling/Mudjacking, Concrete - Pouring & Repair, Concrete - Stamped & Decorative, Countertops, Deck Maintenance, Decks & Porches, Delivery Service, Dock Building & Repair, Doors, Drywall, Dumpster Service, Electrical, Epoxy Flooring, Excavating, Fireplaces, Floor Cleaning/Polishing/Waxing, Flooring Sales/Installation/Repair, Foundation Repair, Fountains, Garage Doors, Glass & Mirrors, Glass Block, Gutter Cleaning, Gutter Repair & Replacement, Handymen, Hardwood Flooring Sales/Installation/Refinishing, Hauling, Heating & A/C, Home Automation, Hurricane Shutters, Insulation, Land Surveying, Landscaping, Landscaping - Hardscaping & Pavers, Landscaping - Lakefront, Landscaping & Lighting, Lawn & Yard Work, Lawn Fertilization & Treatment, Lawn Irrigation, Lead Testing & Removal, Marble & Granite, Masonry, Mold Testing & Remediation, Moving, Painting - Exterior, Painting - Interior, Pest Control/Exterminating, Plumbing, Plumbing - Drain Cleaning, Pressure Washing, Radon Detection & Reduction, Remodeling - Basements, Remodeling - General, Remodeling - Kitchen & Bathroom, Remodeling - Modular & Mobile Home, Remodeling - Sunrooms & Patio Enclosures, Roof Cleaning, Roof Ice/Snow Removal, Roofing, Screen Repair, Septic Tank, Sewer Cleaning, Siding, Skylights, Stone & Gravel, Structural Engineering, Stucco, Tree Service, TV Service - Cable, TV Service - Satellite, Wallpaper Removal, Wallpapering, Window Cleaning, Window Tinting, Window Treatments, Windows, Windows - Egress, Windows - Safety & Security Film, Wrought Iron

Contractors say homeowners with this trait are the most satisfied with home improvement projects.

Angie's Answers

?

If you go the Better Business Bureau website you can see that the company has only had two complaints in the last 18 months and that they have both been resolved.  The company has an A+ rating.  This is not something you can buy.

 

There are genuine reviews on many 3rd party online review sites including AngiesList and the Better Business Bureau.  Simply do a Google search for "Smart Energy Today Reviews".

 

Sol Blanket Insulation acts as a radiant barrier, insulation and a vapor barrier.  It is not intended to replace traditional insulation but in fact compliments it and adds to it's ability to keep cool/hot air (depending on the season) in the home when the envelope of the home is properly sealed.  

 

Every attic is different and there are many other components that must be considered.  You mentioned an attic fan as well.  The heat that is radiated away from the ceiling by the Sol-Blanket Insulation is pushed out of the attic with an attic fan.  The US Department of Energy states that radiant barriers do work and suggest they be installed by professionals.

 

As with any product by any company if the product is not installed properly and other factors (attic fan, caulking and sealing, etc...) are not addressed then it will not be as effective.

?

A couple of comments about what Jim said:

1) Regarding type of insulation, in cold winter environments: Cellulose and fiberglass are actually about comparable in R value when installed - blown in cellulose runs from 3.2-3.8 R value, fiberglass batt 2.9-4.3 R value depending on manufacturer and whether hig-density or low density, high-efficiency or standard, according to official Department of Energy publications. Measured values in attic test cases, in areas with a true winter, after 10 years showed a decrease from 3.4 (in the test case) down to 2.1 for cellulose, and 3.5 to 3.3 for fiberglass batt, due to packing or matting. In an attic environment, there WILL be condensation or frost on the insulation at some point during the year (assuming an area with true winters) and in highly insulated houses commonly for a substantial time period each winter. Fiberglass packs down slightly from that weight but mostly rebounds, cellulose packs down and mats and does not substantially recover, so over the years cellulose loses 1/3 to close to 1/2 its insulation value, fiberglass about 10%.

2) a note on radiation barriers attached to the bottom of the rafters - there are a lot of installers and homeowners making two major mistakes with this product that can cause major trouble: First, be sure to terminate it short of the eave openings. I have seen cases where it was carried all the way out to the fascia board, thereby blocking all airflow on the underside of the roof. Even carrying it all the way to the eaves along the bottom of the rafters will block off ventilation to the main attic area. You have to leave the air space between the rafters open to full airflow from the soffit/eave area ot the ridge vent. Second, do NOT run it continuous from eave to eave across the full width of the attic - leave a gap about a foot wide under the ridge vents so warm and moist air in the attic can vent through the ridge vent. Closing the ridge vent area off with the radiant barrier effectively puts a vapor barrier around the main attic area, causing retention of the moisture which WILL accumulate there, promoting mold.

?

Obviously this is not a timely response to the initial question. However, for those who may be reading these answers at a later time, a couple of added thoughts:

1) the radiant barrier being discussed is basically heavy-duty metal foil or metallized surface on a plastic sheet, intended to reflect RADIATED heat (infrared radiation - think heat light, or heat you can feel at a distance radiated from a fireplace), the same way a mirror reflects light. Radiated heat is how a standard oven broils and how steam and hot water baseboard heat predominately work.

2) you generally should do NOT place a radiant barrier over the insulation that lies between and over the joists in a normal attic, especially in a region where the attic temperature can frequently reach condensation temperature (below about 45-50 degrees) - it may reflect back some of the house heat that is coming up from the house, but by destroying most of the temperature gradient from the house to the attic air destroys much of the driving force that moves moisture to the attic air and subsequent venting. Between that greater heat and the fact the barrier is also a moisture barrier, that makes a perfect condition for mold and rot in your insulation and attic wood, and has become quite an issue in energy upgraded homes because of retrofits that cut off airflow outside the insulation, but do not cut off the moisture source leaking thorough from the house. The proper and ONLY place for a vapor barrier in a normal attic insulation system is on the pressurized and normal warm, humid side of the insulation zone - directly above the ceiling drywall in the top floor, fastened to the UNDERSIDE of the ceiling joists or trusses, NOT anywhere above that. Perforated barriers are supposed to reduce this tendency, but the perforation area percentage is so small that typically they still act as a vapor varrier, just not a totally effective one.

3) radiant barriers reflect radiated heat ewith up to 99% efficiency but have basically zero resistance to CONDUCTION (body to body heat transfer at points of contact - think heat transfer from your warm hand to a frozen cold drink can, or hot pavement heat transfer to the bottom of your feet) - so there needs to be an air gap between the radiant barrier and the hot item passing the heat to it, otherwise the heat will just pass through it by conduction. Therefore, applying it directly to the sheathing (above or below) or manufacturing it directly on the surface of the sheathing defeats its purpose, even though this is commonly done.

4) there is a lot of discussion, particularly in the professional design community, about attic radiant heat barrier effectiveness and problems. Because they are being installed on the bottom of the sheathing or underside of roof joists, they act as a heat trap for the energy being conducted through the roof which would normally radiate into the attic air or be transferred by CONVECTION (fluid flow heat transfer) to the attic air, and be vented through roof vents, ridge vents, gable vents, etc. By trapping that heat, they are causing the underside of the shingles and particularly the felt and sheathing to get a lot hotter than they otherside would, essentially changing it from a system where the shingle top surface might reach 120-180 F and the inside surface of the sheathing about 80-140F in the summer, to making the entire roof system equal to the outside surface temperature. This causes more rapid shingle deterioration and cracking, and makes the felt or plastic moisture barrier under the shingles brittle and subject to failure.

Also, any moisture above the radiant barrier (from roof leaks or humid air coming into the area) is prevented from evaporating by the attic airflow which would normally remove it, so it starts acting like a steamer. I have seen both wood and metal lofts and attics become a major mold farm in months because of this effect, and a couple of roofs which started sagging due to rotted sheathing within 2 years of reroofing with tightly adhered radiant barrier. Some radiant barriers are vapor-permeable to reduce the moisture issue, many are not, but few actually are effective in letting moisture freely escape.

Having seen these products in use, and having analyzed and specified building products for use from the Middle East to the Arctic for decades, and having a Masters in Arctic Engineering (a degree predominately in energy conservation and heat flow), my personal opinion is that these radiant barriers will be banned by code within 10-15 years for unheated (so-called "cold" roofs) roofs, because they just do not use the principles of thermodynamics correctly. For more info on this issue Google the following search phrase  - moisture trapping by radiant attic barriers       and read the government (not the manufacturer) literature on the issue.

5) Unfortunately, the right way to handle this issue is to put the radiant surface on the OUTSIDE of the house - by using reflective materials on the roofing material. This is already done with flat roofs, house trailers, and industrial structures by spraying with alumiunum paint, and a few brands offer reflective aggregate shingles that are slightly more reflective and radiant than normal shingles. People obviously do not like this reflective surface from an aesthetic standpoint, though with solar cells coming into more general use this may soon be more widely adopted. The idea should be to keep the solar energy from penetrating into the building envelope at all, not try to re-reflect it away after it has penetrated throguh the roof system.

The sprayed-in foam has a couple of issues you need to be aware of:

6) it needs to be the low-pressure expanding type mixed for use around window frames, as fully expanding foam can bow joists or trusses and pop drywall ceilings free as it expands, and non-expanding foam actually shrinks as it cures, leaving gaps for air and heat flow alongside the ceiling joists.

7) being closed-cell it is essentially impervious to moisture, so the vapor barrier on the house side has to be EXCELLENT (incuding sealingof all penetrations), or it will trap household moisture escaping into the attic and promote mold and rot in the ceiling drywall and joists.

8) it tends to bleed chemical fumes into the house for a long period of time (can be noticeable for years), which may be objectionable to some people from an odor or environmental standpoint, and especially should be considered if any residents have severe allergy issues or respiratory problems.

9) I emphatically recommend AGAINST use of sprayed-in foam between ceiling joists or truss members in any area that can have cold attic air that could cause moisture condensation in the insulation, though this is probably not a significant problem where you live, assuming your Dallas is the city in Texas. For essentially year-around air-conditioned homes in hot climates, the problem can actually be condensation of attic air moisture on and in the colder ceiling surface insulation and on cold attic runs of air conditioned air, so attic ventilation becomes a critical issue to remove the moisture before it condenses.

In summary, having seen an awful lot of attic moisture and thermal problems, my personal recommendation would be to ensure excellent sealing of the house from the attic, use normal UNFACED fiberglass insulation, and instead of a radiant barrier ensure adequate full-attic ventilation. If you decide to got with a radiant barrier, then I would recommend a perforated one, sloping up towards the sides a foot or two and stopping a foot or so clear at the sides so moist air under it can escape to the roof joist spaces and be vented from the attic. I have seen this done several times with a fine nylon net strung above the insulation in the attic, supporting the barrier, resulting in something very similar to the double-roof system used in bedouin tents, where airflow between the two layers keep the hot air away from the living space.

?
Steve made a good point.  Also, while it isn't required to remove the old insulation you can check the ductwork, wiring, etc. with the old stuff removed,  You can also spray foam around all openings and holes in wall top plates to better seal your home as Steve was pointing out.  My concern is the potential for mold spores you mentioned in your question.  If you suspect there are any get a good company in to remove the old and clean the attic.  Another concern is asbestos.  Your home is old enough you could have it in there and that's worse than mold if released into the air.

Todd Shell
Todd's Home Services
?

A moisture barrier has to be on the warm side ie towards the heated side.  Most people would not install a moisture barrier in your situation.  (They also sell a paint that you can use on your interior ceiling? as a moisture barrier).  Rather most homeowners would hire an insulation contractor to blow a cap over the existing insulation bringing it up to your areas reccomended levels,,Your power company can tell you the level, I would guess R 40.  What you use is up to your wallet, the best is a spray foam that can be applied to the ceiling or over the whole shebang.  Being a bit of a miser I would trot on down to my local big box store and buy a truckload of cellulose and get a free blower for I and a friend to self insulte.  Big box= Menards, Lowes etc.  Cellulose= ground up paper treated with boron for insect control and fireproofing.  It has a high R value and will stop moving air loss from the home. Before you cap current mostly emply attic is ideal time to take sealant to any openings in the attic floor,  like pocket doors, canister lights electircal wires and close off the air leaks from inside.  If foaming skip this.  Hot air rises so you save yourself a ton air sealing the home.

An attic radiant barrier is also a possiblity see my blog for nifty results on it.

Jim Casper Old Energy Conservation Guru

ps moving existing insulation use a plastic rake

?

Have you checked Angie’s List? Angie’s List Answers is a great place to find advice from professionals, but for ratings, reviews and information to help you hire the companies you need, visit www.angieslist.com today.

 

 

Insulation reviews in San Marcos

A

Rating
I highly recommend
San Marcos Insulation Contractors Provider Name Locked
. After dealing with a number of small contractors over the years to do various odd jobs, it was like a breath of fresh air from start to finish with these guys. They earned my trust and confidence each in each step of the process.
1. When I called they actually answered the phone. (As dumb as that sounds, I found many do not and several don't even bother calling back,)
2.
San Marcos Insulation Contractors Provider Name Locked
, the owner, spoke with me himself and was extremely professional, guided me through the process and the pricing upfront. He answered all my questions fully and made me feel quite confident that I had made the right decision calling his company. (Most others that I spoke with either seemed bothered that I had called or came across as sleazy con-men, and none gave up front pricing.)
3. The
San Marcos Insulation Contractors Provider Name Locked
arrived on time and was ready to begin work right away. (I can tell you horror stories about other contractors who could not even do this
San Marcos Insulation Contractors Provider Name Locked
task.)
4. The
San Marcos Insulation Contractors Provider Name Locked
was polite. Yes POLITE!!!
5. The
San Marcos Insulation Contractors Provider Name Locked
had all the correct tools. (My lending toolbox stayed in the
San Marcos Insulation Contractors Provider Name Locked
of the car.)
6. The
San Marcos Insulation Contractors Provider Name Locked
confirmed the scope of the work, inspected the work area, confirmed the estimated time and once again made sure that I was aware of the pricing up front.
7.The
San Marcos Insulation Contractors Provider Name Locked
knew what to do and did it effectively and efficiently. It was really fun just watching him knock it out, almost like it was choreographed. They say that pros make it look easy, this guy made it look dead
San Marcos Insulation Contractors Provider Name Locked
. (I know from personal experience it was not easy at all when you have a steep roof, that's why I hired them in the first place, that and I am getting old.)
8. He would have cleaned up at the end but I stopped him as he had done quite enough on such a hot day and because I figured that I could do the cleaning myself.)
9. When he completed the work he thanked me for the opportunity to work on my project and said that he would be happy to assist me in any future projects.
10. The company sent me my receipt by email and thanked me for my business.
Honest, friendly, polite, professional, experienced, knowledgeable, trustworthy, hard working, and not over priced. Yup! I recommend them.

- Christian W.
B

Rating
They have a minimum fee of $475 for all jobs. My job was not quite $475 so I had to pay the minimum. This is archaic but I paid it so obviously, I am feeding the monster.
The crew arrived almost an hour late, despite knowing their work preceded a window installation project and would impact the other contractor. Stuff happens - they said they got stuck in traffic. This is Columbus, OH, not New
San Marcos Insulation Contractors Provider Name Locked
City. I am amazed when, often, contractors arrive late and blame it on traffic. I go to work everyday, and I arrive on time because I plan for .... traffic. While attempting to pull their large box truck up to the
San Marcos Insulation Contractors Provider Name Locked
in front of my house, the crew shaved off a large branch of my neighbor's tree. I had to yell for them to stop or the damage would have been a lot worse. Ultimately, they had to ask the window installers to move their truck from that spot - after asking ME to negotiate with that crew, for them.
Thankfully, the window installers, who had already begun, agreed to move their truck, then stepped aside and waited for the insulation to be installed. At one point, a supervisor showed up on site and did not introduce himself to me. I had to ask him, as he wandered around my patio, if I could help him, and who was he? He eventually gave me his name but seemed disinterested in communicating with anyone other than his crew. Nice attempt at quality control but a bit of a blunder on customer service.
After the insulation was in, the crew got ready to leave, without cleaning up the mess they made while drilling holes in my cedar and blowing insulation into the walls. I asked, "Do you guys clean this up?", they replied, "Not usually." So I asked them to do so today. They then had to ask the window installers to borrow their shop vac to remove the debris strewn all over my porch. When it came time to pay the bill, they doubled the price. I laughed and said, "Nice try." Additional unfunny comments followed to which I did not reply.
Overall, work seemed fine. Not the most comforting experience with a contractor I've had this summer.
- KATHLEEN D.
A

Rating
Last year we discovered that the sill and backboard had been damaged by termites.
San Marcos Insulation Contractors Provider Name Locked
jacked up the house and installed the new sill and backboard. At the same time we had them install Cleanspace, a plastic covering in our crawl space to keep the basement cleaner and prevent varmints from coming in the house. We were very happy with the estimate, and the services.
- Ronald S.
A

Rating
Very professional, first visit provided inspection, review, options, recommendations. Cost options sent via email promptly. Pricing was reasonable. Was able to schedule quickly. Crew courteous, professional, took care to minimize disruption, dust. Would definitely highly recommend.
- Charles Y.
A

Rating
San Marcos Insulation Contractors Provider Name Locked
came to our 124 year old row home and evaluated both HVAC systems and made recommendations as to how to heat/cool our home more efficiently and effectively. Even though we are out of his service area, he gave us great recommendations as to how to keep our 3rd floor cooler in the summer and keep parts of our home warmer in the winter. And there was NOTHING in it for him as he cannot do the work/implement the solutions as we are not in his area. Very, very pleased that we got such great advice and recommendations from an expert in the field for FREE. Highly recommend.
- MIMI M.
A

Rating
He was friendly, on time, did more than expected and insulated our attic hatch, was extremely pleasant and easy to work with and gave a fair quote on the phone simply based on our square footage. Very good and affordable. I could not have done it myself for less.
- David W.
A

Rating
Perfectly. We were very appreciate of
San Marcos Insulation Contractors Provider Name Locked
's expertise in locating gaps in our attic area where we were losing heat, and explaining the situation and how he would address it. Clean-up was also 100%.
- Carl H.
N

Rating
They came first to look over the house prior to doing the work. Did the job. They were very professional and on time in each case. They are a very trustworthy company. Very happy I went with them.
- Rachelle L.

Insulation Contractors in San Marcos, TX

Companies below are listed in alphabetical order. To view top rated service providers along with reviews and ratings, Join Angie's List Now!

31-W INSULATION CO

600 LEANDER DR
Leander

512 Renovations

4701 Honey Bear Loop
Round Rock

A-OK SERVICES

5159 SHERRI ANN
San Antonio

Absolute Chimney Experts

5419 Montview St.
Austin

Absolute Contracting, Inc.

110A Rose Ln
Frisco

ACOUSTICAL CEILING SPECIALISTS

PO BOX 340511
Austin

ADVANCED INSULATION OF TEXAS

1030 CANYON BEND DR
Dripping Springs

Air Medic AC & Heating

190 Creekwood Trail
Cedar Creek

Aire Serv Heating & Air Conditioning

2001 Clovis Barker Rd
San Marcos

All Home Construction

16713 Rocky Ridge Rd
Austin

Altex Services

3616 Far West Blvd #117-268

Altruistic Home Repair/Remodel

PO BOX 152156
Austin

Ambient Control Service Company Inc

P.O. Box 351
Pflugerville

American Home Shield

889 Ridge Lake Blvd

Americas 1st Choice

1851 County Road 137
Hutto

Americraft Siding & Windows Inc

1316 Ridgefield Loop
Round Rock

ASAP Windows & Siding

6401 Burnet Ln
Austin

Attic Care Ltd Co

800 Sunny Oaks Ct
Pflugerville

AtticDr.com

1108 Lavaca St
Austin

ATX Bat & Wildlife Control

4701 Priem Lane
Pflugerville

ATX Remodeling Pros

11411 Research Blvd
Austin

Austin Air Management, LLC

163 Round Up Drive
Liberty Hill

Austin Handyman LLC

4408 Spicewood Springs Rd
Austin

Austin Refrigeration LLC

204 W. Powell Ln
Austin

Austin Texas Insulation

578 Congress Ave
Austin

Austin Texas Insulation

105 East 5th Street
Austin

BAY ENERGY BLANKET INC

111 W MCCARTY LN
San Marcos

Bernhard Tile

5021 Antler Pass

Bexar County Contracting LLC

405 Winterfield Dr Unit 104
Hutto

Blaker Restorations & Remodeling INC

3630 Cheyenne
Round Rock

Bloodhound Inspections LLC

6725 Hansa Loop
Austin

Brennan Enterprises Inc

2100 East Randol Mill Road
Arlington

C&J Home Improvements

P.O. Box 1841
Buda

Cain Construction & Carpentry

15019 Big Falls Dr
Leander

Caldwell County Construction

802 S Church St
Lockhart

Carmen N Company

210 Beech Dr.
Kyle

Casa Mechanical Services

2401 E Old Settlers Blvd
Round Rock

Castilleja Construction

4604 Mellow Hollow Dr.
Austin

Castle Roofing

1707 N. Mays
Round Rock

Celis Drywall LLC

1564 Amberwood Loop
Kyle

Central Texas Duct Cleaning

2040 John Charles Rd
Bulverde

Chill Out Climate Control

29 Valley View Dr
Round Rock

Climate Mechanical Inc

PO Box 151570
Austin

Comfort Control

P.O. Box 1482
Dripping Springs

Conservation Specialists of Austin, LLC

4514 Manzanillo Drive
Austin

Cooler Green Solutions

5701 W Slaughter Lane
Austin

Cotham Construction Services & Roofing

201 S Lakeline Blvd
Cedar Park

Craftsman Roofing Services, LLC

1003 Adventure Ln
Cedar Park

Dave's Heating & Air

208 Sloan St
Taylor

Dayton A/C & Heating

PO Box 1416
Manchaca

DBA Vazquez Trimming

285 Riddle Road
Cedar Creek

Deruiter Insulation Inc.

2201 Pena Blanca Dr
Cedar Park

Devil Dog Construction

3212 gregg lane
Manor

Dimensional Heating & Air, LLC

826 Wagon Trail
Austin

Double L Insulation Company Inc

1034 Canyon Bend Drive
Dripping Springs

DreamScape Design

8760-A Research Blvd
Austin

DRYWALL

120 Joe Robinson dr
Kyle

Efficient Attic Systems

2306 W Howard Ln
Austin

Expert Service Inc

1308 E 51st St
Austin

Falkin Services Unlimited

2727 Lyons Rd.
Austin

Full Circle Remodeling

7312 E. Ben White #12
Austin

GetSpares, LLC

900 Ranch Road 620 S
Austin

Go Green Heating & Cooling

10421 Old Manchaca Rd
Austin

Grandquist Operations

10301 FM 2222
Austin

Green Building Energy Services LLC

5214 Burleson Rd
Austin

Green Collar Operations

625 Brentwood St
Austin

Green Liberty Building Systems

11720 BIG TRAIL
Austin

GW Construction

714 PR 905
Liberty Hill

Heat Busters

1220 Airport Fwy
Bedford

Heisman Contracting

11811 Rotherham Dr
Austin

Heritage Moving & Storage LLC

13709 Topper Cir
San Antonio

HERNANDEZ DRYWALL

304 JACK RYAN LN
Austin

Hill Country Insulation LLC

20105 Algreg St
Pflugerville

Hill Country Renovations

Hwy 290
Dripping Springs

HIRE PROS

3913 Todd Ln
Austin

Hunters Marc Construction

2115 Teakwood Lane
Plano

Indoor Weather Professionals

1605 Hydro Dr
Austin

Infinite Exteriors Construction Company LLC

7301 RR 620 North Suite 155-162
Austin

Insulation Works

7523 Perseus Sound
San Antonio

InsulationCleaners.com

205 Wigeon Cove
Cedar Park

Integrity Contractors & Developers LLC

15201 East Freeway
Channelview

Integrity Interiors

512-865-9925
Austin

John Davis Consulting

1503 Bridgeway Dr # A
Austin

John Guerrero & Associates

1600 Amberwood Loop
Kyle

JP Construction

4018 Shavano Dr
Austin

KCLC

San Marcos

Ken's Handyman Service

212 Hwy 21 E
Bastrop

Kewl Aire

4119 Spotswood Tr
San Antonio

Kraft Werks

109 Highland Horizon
Austin

L and M Home Detail

1405 Clearfield Dr
Austin

L Nelson Remodeling

6800-132 Westgate Blvd
Austin

L&M Plumbing and Remodeling

2924 Cohoba Drive
Austin

Legends Roofing

9536 Tarleton St
Dallas

Lon Smith Roofing

9518 Hwy 290 W
Austin

M&M Roofing, Siding & Windows

12325 Hymeadow Dr. Bldg 1
Austin

M2 Renovation

4303 S. First st.
Austin

Masada Roofing Inc

1208 Oak Shadows Cir
Austin

Master Fix

16401 Westview Tr
Austin

Metal Mart

3501 East Hwy 29

MK Construction Specialists

P.O.Box 641
Liberty Hill

MKZ Construction

1430 Rustling Oaks Drive
Conroe

Morales Handyman Service

5613 Spring Meadow Rd
Austin

Mr. Handyman Of NE Austin & Georgetown

2508 Williams Dr
Georgetown

Nate's-Know-How

Pflugerville

Newmatic Painting and Remodeling

9610 Holly Springs Dr.
Austin

Noah's Ark Carpentry & Siding Inc

303 Hickok St.
Round Rock

NUSSEL CONTRACTING LLC

PO BOX 151842
Austin

Old School Builders LLC

2460 Green Meadows Ln
Buda

OnCall Home Services

5555 N.Lamar Blvd. 78751
Austin

ortiz drywall

1024 Alamo St
Lockhart

Payless Insulation

3101 Longhorn Blvd., #110
Austin

Petrocelli Services

5114 Balcones Woods Drive
Austin

Phillips Construction LLC

2301 First View
Leander

PJB Contracting LLC

11401 Hunters Ln
Austin

Precision Heating & Air LLC

8711 Burnet Rd
Austin

Priority Cooling & Heating LLC

P.O. Box 8567
Round Rock

Reliable Air

4702 Highway 123 Ste. C
San Marcos

Remodeling Boutique

3402 Lakeside Dr
Austin

RENT A MAN CONSTRUCTION

9222 Burnet Road
Austin

Residential Improvement Services, LLC

910 Duncan Ln, Ste 6
Austin

RG Designs

PO Box 376
Manchaca

Rockin' D Services

164 Wood Farm Rd
Huntsville

RoofCrafters Inc

610 Horizon Park
Leander

Russell Pajestka Company

PO Box 325
Holland

Service Solutions of Austin

9300 S IH35
Austin

SIGNATURE EXTERIORS

12445 Alameda Trace Cir Apt 816
Austin

SL Construction & Remodels

140 Parr Ave
Spicewood

Soundrite-Acoustics, Inc.

209 S. Stephanie Street

Statewide Remodeling

2450 Esters Blvd
Dallas

Straight Arrow Solutions

830 Ramos St
Austin

Strand Brothers Service Experts

1900 E Howard Ln
Pflugerville

Sunsational Solutions

600 S Bell Blvd Ste 16
Cedar Park

TD Services

Interstate 35
Kyle

Terminix

1826 A Kramer Ln
Austin

Terminix - San Antonio

1850 Grandstand Dr
San Antonio

Teva Construction LLC DBA Heavenly Handyman

3702 Tall Cedars Rd
Cedar Park

Tex Perts Cooling & Heating

6345 Walzem Rd
San Antonio

TEXAS CAPITAL DRYWALL

9109 Encino Vlg
San Antonio

Texas Pest Pro LLC

12111 Suite 212B
Wimberley

THERMO-TEX INSULATION CO

18402 LAKE OAKS DR
Jonestown

TORO CONSTRUCTION

501 BALCONES HEIGHTS ROAD
San Antonio

Totally Cool aka City Conservation

909 McPhaul Street
Austin

Triple G Insulation

1150 N Loop 1604 W Ste 108
San Antonio

Trusted Restore

12407 N MOPAC
Austin

Tyko Inc

10601 Manchaca Rd
Austin

UpKeepers, Inc

4015 Guadalupe St
Austin

Vintage Modern

2029 Northridge Dr.
Austin

VJ Remodeling

7006 Crosswood dr.
Austin

Warmzone

12637 S 265 W Suite 100

Welborn Garage Door Inc

1260 Shiloh Rd
Plano

WF Remodeling

603 Caballero Rd
Leander

White lion construction

508 E.howard Ln.

Wise Energy Systems

5114 Balcones Woods Drive
Austin

Woods Comfort Systems

1902 Dutton Dr
San Marcos

Woods Construction

20 Skyline Drive
Martindale

Shop Local Insulation Services in San Marcos, TX

Join Angie's List to get the best local reviews in San Marcos.

What Does My Membership Include?
  • Instant access to reviews for 700+ services
  • Exclusive service discounts - up to 70 percent off!
  • Top-notch support from our live call center
How does Angie's List work?
1. Say you need a Insulation Contractor
2. Angie's List has tons of detailed, local reviews.
3. Find a winner, and book them.
4. Angie's List is there to resolve any issues.
CBS
Good Morning America
Fox News
USA Today
The Wall Street Journal
MSN money