Keota HVAC Contractors

in Keota, OK

25
HVAC Contractors are
in Keota

13
HVAC Contractors in Keota
are top rated

A
Rated by
Dennis M.
"I had a problem with the heating system that I didn't understand. I called the provider and they quoted a price and a time at which they would arrive to look at the issue. After" a prompt arrival, within minutes they evaluated and determined the problem, then speedily replaced the circulation pump. Excellent service. I truly appreciate that this all happened the same day and I didn't have to wait days to have someone come over or get a diagnosis or estimate.
A
Rated by
Michael H.
"During the process of preparing for winter and draining outside spigots I broke off a small bleeder valve on one of the waterline shut-offs in our basement. This resulted in a rapid" leak across the basement floor on a Saturday morning. I called
within two hours the owner showed up at our door. A little over an hour later he had capped the leak and had also provided some much appreciated advice on our air exchange system. We have used
in the past and we'll certainly use them when we deal with relocating & replacing the shut-offs in the spring. Great service!
A
Rated by
Jessa M.
"In researching new furnaces, what came up over and over is that most brands are about the same. What matters is the installer and their skill. 3 out of 4 companies sent salesman." The exception was G&H. Rather than a salesman,
, the owner and installer came out. Real personable guy, easy to work with, was experienced and knowledgeable. Rather than just use the size of the furnace already in the house, he recommended a smaller furnace as the old furnace was an 80% AFUE and the new one is 97% AFUE (which saved me money). In order to make sure, he ran a manual-J test, with the help of a friend
, which took an hour and required some effort. I really appreciated that. We chose him as a result of this as we felt that he would do a nice job, and we were not disappointed. We had them install a new furnace and new A/C unit.
and
did a real nice professional job on the install. The furnace looks nice and runs nice. They were professional and courteous, and did everything I asked. They were great and I would use them again, as well as use them for service. So far so good, I will update the review if anything changes. A+++
-Find top-rated Service Providers

Find Top-Rated Keota HVAC Contractors

Angie's List helps you hire the best - and avoid the rest!

HVAC Contractors to Avoid

12

Top Rated HVAC Contractors

13

Prevent buyer's remorse with us

  • Tardiness is the #1 complaint against Keota HVAC Contractors
  • Shop with us to ensure a fair price
  • Our complaint resolution team will help if a project goes bad
+See Verified Local Reviews

Over 200,000 reviews for
Keota HVAC Contractors from people just like you.

A
"I had a problem with the heating system that I didn't understand. I called the provider and they quoted a price and a time at which they would arrive to look" at the issue. After a prompt arrival, within minutes they evaluated and determined the problem, then speedily replaced the circulation pump. Excellent service. I truly appreciate that this all happened the same day and I didn't have to wait days to have someone come over or get a diagnosis or estimate.

-Dennis M.

A
"During the process of preparing for winter and draining outside spigots I broke off a small bleeder valve on one of the waterline shut-offs in our basement. This" resulted in a rapid leak across the basement floor on a Saturday morning. I called
within two hours the owner showed up at our door. A little over an hour later he had capped the leak and had also provided some much appreciated advice on our air exchange system. We have used
in the past and we'll certainly use them when we deal with relocating & replacing the shut-offs in the spring. Great service!

-Michael H.

+Shop, Schedule, and Save on Services

Shop, Search and Save from anywhere!

  • Offers are exclusively provided by highly rated companies
  • Angie’s List members have access to exclusive discounts on local services
  • Shop, schedule, and stay on top of progress from any device
  • Our 30 Day Refund Guarantee means you can buy with confidence!
+Join 2 Million People on Angie's List

Over 2 million people trust Angie's List.

  • Your Membership Includes:
  • Instant access to top rated businesses covering 700+ services
  • Our Complaint Resolution Team to help when a project goes bad
  • On-the-go access to our iPhone, Android, & iPad apps
Find top-rated Service Providers
See Verified Local Reviews
Shop, Schedule, and Save on Services
Join 2 Million People on Angie's List

Local Articles in Keota

Winter guide

The Angie's List Guide to Winter Maintenance

It's the time of year when the winter weather can take a toll. Follow this winter maintenance checklist to protect your home, your car and your health.

An HVAC expert needs training in both electronics and plumbing. (Photo submitted by Angie's List member Dave M.)

Hiring an HVAC service

The awkward-to-pronounce acronym stands for "heating, ventilation and air conditioning" which in many respects are completely different processes.

If you are looking for the peak of heating and cooling efficiency and performance, a Frigidaire system can address your needs.
Heating & A/C

The efficiency of your new furnace is one of the most crucial aspects of long-term performance for your unit. Learn what's recommended for your region.

heat pump
Heating & A/C

Heat pumps have many advantages, but most homeowners aren't sure how much a heat pump costs to install and operate, compared to normal central air HVAC systems.

New furnaces also have more safety controls and sensors than older furnaces, says Unsdorfer. (Photo courtesy of Central Heating & Air Conditioning Co.)
Heating & A/C

Learn how to know when it's time to replace your furnace, and to determine what type will replace it. Expect to see higher efficiency and lower heating bills.

filter replacement
Air Duct Cleaning, Heating & A/C

Heating and air conditioning service professionals share tips to keep your HVAC system in great shape and protect yourself from scammers.

Angie's Answers

?

No one can tell you what another contractor will charge. There is no one set price for heating and air-conditioning equipment installation. One of the major factors that affect your price is its size. No one can tell you what size equipment you’ll need without doing a load analysis on the home. That calculation essentially determines the insulation value of the home, i.e... What is the heat gain of the home, what are some other prevailing factors like room equipment, solar gain, or natural shading? You can compare prices between contractors to gauge what your cost would be between contractors, but this is a little tricky to do. Let me explain a little more. Let's say you get an installation quote of $5050.00 from contractor “A” who employs three technicians and operates two trucks. He also runs his operation from home. Contractor “B” charges $6200.00 to do the same job but has 10 employees and 5 trucks. He works out of a rental unit and offers his people a little bit better of a benefit package to recruit highly motivated workers. Everything else being equal (equipment size, SEER rating, furnace efficiency, brand name and additional material—other things that affect the price), is either one of these contractors defrauding you? No, their overhead is different. All these things play into a company’s labor rate. Just be aware of your expectations when it comes to performing any kind work in your home. If you want to pay an extremely low-inexpensive price below the average installation cost in your area then you are highly likely to get the quality of work that comes with that cost. Remember cheaper is not better!

?
Yes Jupiter. It depends on the severity of the situation, is the mold encapsulated in the insulation. If yes, than replace [insulation] it with new. Is it on the casing of the heater? If yes, clean it with a mold neutralizing metal cleaner. It's not a matter of finding something or someone to clean or address the existing mold. It's a matter of finding a contractor to rectify what is causing the mold grow. It's coming from excessive moisture in the air-handler unit. I can say with 100% surety you’re dealing with poor airflow and/or incorrect equipment sizing! Either issue will cause excessive icing of the evaporator coil, which leads to excessive condensate water in the system. The condensate will eventually overflow the drain pan leaving stagnant water in the air-handler housing, which leads to mold growth. I would not let any contractor do any kind of temporary repair, add any device like a UV light or air-cleaning product until the aforementioned is corrected. I talk a lot about this in my videos and on my website. It is the result of improper system design from unqualified contractors. There is a reason why some guys cost more than others, and this is one reason why!




?

The furnaces are both good. They come with the same warranty. More importantly it is the installation process that is most important. Both of these furnaces need to be setup properly as they both tend to be particular if installed incorrectly.

I will say that I am a York Certified comfort Expert. I have in the past been a Trane Dealer. I used to dislike York, but since Johnson Controls bought them, they have improved drastically. Since Ingersollrand bought Trane they have improved slightly, but I am not impressed.

The differences in both are as follows (these are both top of the line form theier manufacturers):

The Trane has a 95% Efficiency The York is 98% efficient.

The Trane has 2 stages of heating the York has 100 stages of heating.

Both systems have variable speed motors with different modes, Trane has Comfort R and York has ClimaTrak, both pretty much the same.  Setup of the dipswitches/jumpers are the most importnant and vary by system size and your climate.

The Trane has an external trap and is either upflow or downflow. The York is 4 way compatible with an internal trap.

The Trane has a nicer furnace cabinet, but most of the time the furnace is hidden and is irelevant.

Some Trane units are made in Monterey, Mexico. All York units are Made in Witchita, Kansas or Norman , Oklahoma. (some interanl components are made overseas in both units, but all Yorks are assembled in USA).

Depending on your installation companies relationship, then the support they get from the manufacturer differs. I have found that if you buy alot of Trane you get good service, if you do not, then service is not that great. The same may be said about York, but so far I have great support from York. York will work with the smaller companies more than Trane will (my opinion).  Again, I have sold, installed and repaired from both manufacturers so I have knowledge in both. I also used to dislike York. If you are in the trade, I invite you to look at the new York line of systems. You will may be impressed.

 

I think both products offer the best furnaces available, compared to other brands.  Depending on who installs it is most important as well as their relationship with the manufacturers.  Both good products.  I hope that helps.

 

Justin

A NATE Certified Mechanical Contractor.

?
The only thing of importance, is the hvac professional you choose to use. Alot of manufacturer's pieces are built relatively the same, and will last about the same amount of time. The thing that matters most is what you can not compare between companies, and that is the installation. Purchasing a system is not like purchasing a car, where no matter where you buy it, they are all the same. Each installation is different, and usually what you are paying for is the level of expertise, and quality of the installation, the company who will actual give you the warranty, and the comfort that you will receive. Manufacturers warranties disappear every day. They always have a loophole where they can get out of paying, but your local dealer wants to keep you happy for future work, and to protect his reputation in the communiy. Look up 4 year old Nordyne and Goodman warranty problems. Choose the HVAC professional first. It will cost you the least in the long run. I have had to totally redo plenty of installations that were just performed because of an uncomfortable customer, and a system that keeps breaking down. The equipment is only as good as it's installation, and over 70% are not installed correctly.
?
I think maybe you are confusing SEER, which is an efficiency-related rating (higher SEER means more effective use of the electric power used to compress the gas), and TONS rating, which is a measure of the total cooling power of the system. (Tons used to mean how many tons per hour of ice was used in evaporative cooling building systems - a Refrigeration or Cooling Ton equals 12,000 Btu/Hour of energy exchange. A BTU, which is another antique measure but still used, is the energy needed to change the temperature of a pound of water one degree fahrenheit. Unfortunately, because of varying humidity and evaporation, this is not readily related to house air heating or cooling without a lot of assumptions and some computations. Relating this to today's world - the Manuals BayAreaAc referred to account for all these energy conversions and determine an estimated cooling (or heating) requirement for your specific house. The type of construction, solar exposure, general climatic conditions such as average temperatures, humidity, and hottest and coldest normal ambient temperatures and desired inside temperture are all taken into account in the more sophisticated versions of the analysis, so there is no "standard", though a rough old rule of thumb was about 1 ton of cooling per 500SF of house. Obviously, this was a WAG only because it did not account for insulation, type of roofing, whether you live in Alaska or Miami, etc. The ACCA manuals do a very simplified form of evaluation to arrive at a "design", which generally will be adequate. OF course, highly precise calculations are not really needed because A/C units generally come in even ton ratings - so if you are at say 2.6 ton requirement you will be getting a 3-ton unit anyway. SEER ratings are not a direct measure of efficiency, but the relative difference between ratings gives you good idea of the unit's relative efficency in using electricity - so a 16 SEER should be about 19% more efficient (so roughly comparable lower electricity bill) than a comparably sized 13 SEER unit. 13 SEER is the lowest efficiency currently allowed to be built for general use, 19 SEER is about the highest efficiency made by pretty much all manufacturers, and about 25 SEER is the highest rated though very pricey shelf-item units, though special construction custom units can reach about 30 SEER. Note however, like any government sponsored rating, much of it is hooey when you get down to it - for instance, SEER ratings are figured based on 80 degree inside air temp and 82 degrees outside, when that is far from the normal case of mid to low seventies inside and high eighties or above outdoors. This makes the absolute SEER rating meaningless, but relative numbers still have meaning in comparing units. Note these efficiency ratings are for conventional air conditoners and heat pumps working in ambient air conditions. Ground sourced Geothermal or lake/river exchange cooling units, though initially more expensive in most cases, can greatly exceed the air-exchange unit efficiencies because they are exchanging heat with cold natural water rather than with a high-temperature outside air, and instead of continually compressing a gas are just circulating cold water. I worked on one geothermal cooling project which had almost infinite efficiency, which of course makes no sense - but the only power was for sensors and a control valve as the water flow was single-pass under gravity flow, so no power was used to circulate the water.
?
YOU.
You bought the home after an inspection that told you there were issues?
Every state has different laws regarding home purchases, contact your real estate agent to find out what remedies may apply.
THIS IS EXACTLY why you hire QUALIFIED and LICENSED contractors.

Doug
AirTekHP
CSLB# 824188 

Hvac reviews in Keota

A

Rating
Pricing was very fair, and they worked with me on the design and install of my upstairs expansion at my house. Quality of work is great. While the upstairs installation was happening, the compressor went out on my downstairs unit. They came out after hours and replaced the compressor without any extra emergency fees. They also handled the warranty paperwork on the replacement part.
- Andrew R.
C

Rating
We went with another company and it was very sad since we had Croppe for 10 years. They have gotten too big and the people who come to service and sell the equipment don't seem as careful and friendly any longer.
- Susan J.
A

Rating
I contacted
Keota HVAC Contractors Provider Name Locked
by phone on Thursday around 3pm. I didn't hear back, so waited until Friday around noon, and visited their website and sent an Angie's List email to the provider. In the email, I explained that I was waiting to hear back and hadn't. WIthin a few minutes I received a phone call from
Keota HVAC Contractors Provider Name Locked
, and first off he apologized and assured me that he would look into why my call was not returned within a reasonable time frame, and then asked how he could help me out. He asked me to buy the Big Deal and that I would be contacted shortly. Within an hour, I was contacted to set up a time for our furnace and my mother-in-law's furnace to have a winter tune up.
Keota HVAC Contractors Provider Name Locked
was our technician, he was not only on time, but was very thorough in the turn up and was clean, by using covers on his shoes and left the furnace area clean.
Keota HVAC Contractors Provider Name Locked
spent around an hour at our home, and then went to my mother in law's and spent around an hour at her home. He was very trustworthy, did great work and I feel very comfortable that our furnaces should be in prime condition for the winter.
Not only did I really like the personal phone call from
Keota HVAC Contractors Provider Name Locked
, but everyone I spoke to at this company were very professional and they were on time and trustworthy.

- Dustin C.
A

Rating
Awesome!
Keota HVAC Contractors Provider Name Locked
and his team really worked hard in the attic, crawl space, on ladders, and in the rain. There were no complaints from the team and this was not an easy job. The installation required three condensing units and eight heads.
Keota HVAC Contractors Provider Name Locked
installed in such a way that there are no splices
Keota HVAC Contractors Provider Name Locked
the coolant lines. This requires more work, but will make us happier many years later. Additionally, we hired their electrician for a separate job. We also referred them to a neighbor who had a like system installed in a rental duplex. There were a few punch list items with the job which were addressed promptly. Because we did not like the idea of white line hide on our house
Keota HVAC Contractors Provider Name Locked
had the line hide pieces sent to us two weeks ahead of time so that we could paint them. The end result looks great. While the Fujitsu system does not run for free, it uses significantly less energy than we expected.
- Paul D.
A

Rating
;I've had
Keota HVAC Contractors Provider Name Locked
check out the heating system several times now and have been quite satisfied. He is on time, friendly and efficient. He will also adjust the thermostat if I need it.
- BETTY D.
A

Rating
Went well. Told me the motor wa going and to expect it to eventually breakdown at anytime.
Will consider a new system
- William & Linda D.
F

Rating
Our a/c compressor stopped working on Monday,
Keota HVAC Contractors Provider Name Locked
22, 2014. I called
Keota HVAC Contractors Provider Name Locked
as I have used them before in 2004 to install my air handler. They called back first thing Tuesday
Keota HVAC Contractors Provider Name Locked
and gave me a time of arrival between 11:30 and 3:00pm that day. At 4:00 I called and asked where was the tech as he was supposed to give me a 30 minute heads up that he was on the way. They then tell me he got held up at another appointment and he was on the way.
As I was waiting for him to come over I did some research as to what my problem might be. The internet is a very handy tool if you know how to use the information. I found out that more than likely my capacitor was not putting out the correct amount of power to keep the compressor fan running.
When the tech finally showed up at 4:45, I told him what I thought was wrong with the unit and he proceeded to inspect the unit. In two minutes he advised that my fan motor was not working correctly and needed to be replaced. He said it was pulling too many amps and would turn itself off. This didn't make any sense to me because it would turn on for a few minutes before turning off.
At this point I asked if he had a replacement and how much it would cost. He did not have one, so it would not be fixed till the following day, Xmas eve. He did however, advise the cost to replace the fan motor would be $540!!
So, since I had a day to wait for them to get a replacement, I did some more research and fount the motor I needed at a local store for only $140. I ran out first thing Wednesday morning, bought the motor, and had it installed by noon.
Now the good part, the new motor did exactly what the old motor did, ran for three minutes then quit. So now it's Christmas and I had to overnight the capacitor that I should have replaced the first day. Part arrived this evening, Friday 12/26, and it took me 20 minutes to install. A/C is now working great but I'm out $90 for their diagnosis and $140 for a new fan motor.
I explained everything to the tech what the a/c unit was doing and he should have at least considered what I was saying. I will call them on Monday and see if I can get a refund, however I"m not too optimistic. If they do I will amend this report.
- Philip D.

All HVAC Contractors in Keota, OK

Companies below are listed in alphabetical order. To view top rated service providers along with reviews and ratings, Join Angie's List Now!

AIR CARE SYSTEMS

4011 BURNVILLE RD

Aloha Floors and More LLC

109940 S 4744 Rd
Muldrow

American Home Shield

889 Ridge Lake Blvd

AppliancePartsPros.com

16501 Ventura Blvd Ste 500

Bane Electric

1414 Walnut

Bills Electric

117 Circle Drive
Poteau

G & K Heat & Air

22531 233rd Avenue
Spiro

SENSIBLE AIR

800 Indurstrial Park Rd.
Muldrow

Ted's Heating & Air

2215 Bluff Ave

Warmzone

12637 S 265 W Suite 100

WORLDWIDE FILTERS LLC

3318 Pagosa Ct

Wright Home Services

PO Box 436
Vian

Join Angie's List to get the best local reviews in Keota.

What Does My Membership Include?
  • Instant access to reviews for 700+ services
  • Exclusive service discounts - up to 70 percent off!
  • Top-notch support from our live call center
How does Angie's List work?
1. Say you need a Heating Repair
2. Angie's List has tons of detailed, local reviews.
3. Find a winner, and book them.
4. Angie's List is there to resolve any issues.
CBS
Good Morning America
Fox News
USA Today
The Wall Street Journal
MSN money