-Find top-rated Service Providers

Find Top-Rated Port Clinton Lighting Companies

Angie's List helps you hire the best - and avoid the rest!

Lighting Companies to Avoid

20

Top Rated Lighting Companies

7

Prevent buyer's remorse with us

  • Over 3 million people trust Angie's List to help make the right choice
  • Be informed to avoid costly mistakes
  • Shop with us to ensure a fair price
  • Our complaint resolution team will help if a project goes bad
+See Verified Local Reviews

Over 1,119 reviews for
Port Clinton Lighting Companies from people just like you.

N
"
was a great guy and easy to work with. Despite having a hectic schedule he made an effort to take care of my small job within days while" every other contractors said I would have to wait a month to see someone.
, worked around my schedule and even worked on the weekend so that my project would get done. His prices were very reasonable and I work my many contractors for my work.

-Sabih Q.

A
"
arrived at the time he indicated he would be there. He completed the work in a reasonable time and verified everything was working properly" before he left. He explained challenges he ran into. His invoices were clear and detailed. He minimized the impact of the work to the drywall in the room. Overall, very satisfied with the work.

-Amy B.

+Join 2 Million People on Angie's List

Over 2 million people trust Angie's List.

  • Your Membership Includes:
  • Instant access to top rated businesses covering 700+ services
  • Our Complaint Resolution Team to help when a project goes bad
  • On-the-go access to our iPhone, Android, & iPad apps
Find top-rated Service Providers
See Verified Local Reviews
Join 2 Million People on Angie's List

Local Articles in Port Clinton

LED Lights

LED lighting is on the cutting edge of home lighting technology. Learn how LEDs are more efficient than other light bulbs, and get tips for installing LEDs around the home.

Security and outdoor lighting

The installation and proper placement of outdoor lighting can enhance the beauty, security and safety of a home. Learn about lighting options, sensors, placement and other strategies.

brightened kitchen remodel
Interior Design & Decorating, Lighting, Cabinet Refacing/Restoration

Is your kitchen dark and dreary? Check out these tips to brighten a dark kitchen.

ambient lighting
Lighting, Interior Design & Decorating, Electrical

People often underestimate and overlook lighting when planning a space.

Kitchens offer an abundance of lighting choices that can add aesthetic appeal. (Photo courtesy of Angie's List member Tim S. of  Atlanta)
Lighting, Electrical

On this episode of the Chat with the Experts podcast, Chuck Hill of Mister Sparky explains lighting options for your home and answers electrical questions.

light fixture hanging in kitchen
Lighting, Remodeling - Kitchen & Bathroom

Consider these tips for selecting kitchen lights.

Angie's Answers

?

THE Cost of the recessed light is largly determinate on Where ,You purchase the product and the number you buy .Big Box dicount stores have products made oversea's that are less expensive than those found at Custom Bath & Kitchen Stores , but the products are often riddled with problems , missing parts , defects etc,

 

A typical light will run $ 35.00 to $ 85.00

 

However , the true cost of recessed lighting is involved in getting circuits or circuity to the switch and lighting system .In NEW construction , this matter is easily dealt with by installing circuits and   hardware during framing . Whereas , with remodeling , installing new lighting into existing spaces , requires wall & ceiling opening ,closure , repair , repainting & finishing

 

I have been involved in projects where the lighting cost but $500.00 ,,

while the installation & finishing costs exceeded $ 2500.00

?

Here is about the same question (for 1 fan) a while back, with answer:

http://answers.angieslist.com/how-cost-install-ceiling-fan-ceiling-light-exists-q46721.aspx

Your total cost could be from 1.5-3 times that shown in the answer, depending on how much of the wiring for the three fans he can combine - i.e. can he easily run one power circuit for all 3 fans, then just tap off that for switches and runs to the fans, are they fans only or with lights (double the wiring and switches), etc. Note the costs do NOT include drywall/panelling repair or painting to match. Also, you are going to be near the top end of the estimates, because in all probability your access is poor, and 3 fans are almost certain to require a totally new run from the breaker box.

Unless you have an open exposed-joist attic above where the fans are to go AND the top of the walls the switches will go in, you can expect substantial holes in walls and ceiling to pull the wires and fasten them - by code, you cannot just pull wires between joist and let them lie on the top of the ceiling drywall - you have to staple them to joists every few feet, so you end up with several 1-2 foot holes typically near top of the wall (to drill through top plate), near side of ceiling to grab and bend wire coming up wall, and maybe one mid-ceiling to reach in and fasten wire, then of course the two openings that are ultimately fully concealed by the switch plate and the fan mounting plate or dome.

Before you get into this project I would check with the condo management if you are allowed to do this - there are limits to how much you can modify your condo and how much you can modify or add in the way of electric circuits.

?
?
?

Ahhhh - the light bulb comes on - but I didn't see the rabbit - it must have made it down the hole. Was I right about you upgrading the bulbs from a lower wattage, and that is when they started going out ?

 

I seriously doubt it is the track, from what you say and especially since the one head works fine at various places along the track. My guess - because these are apparently 110V track but 12V transformer INSIDE the head that mounts to the track, I would say it is the transformer overheating - a VERY common thing with modern electronics and cheap transformers from China. Commonly they have a thermal protector that cuts out when overheated, but overheating 2 or 3 times is normally fatal for them. I bet the transformers have fried, and that even the ones still working are smoked and probably have deformed plastic around them.

 

The unit is rated to 75W max, and the bulbs you have are 75W and of a design that provides little airflow around them (zero if you are using the glass cover plates for the heads) and has a lot of heat in the upper portion of it - in my opinion just another dumb design. I will give 10:1 odds there are not air holes in the top of the heads either - UL should ban that practice. 

 

Personally, if it were all new I would return it all for my money back right off. Since the track and some heads are old and you are invested in them already, I would gather up receipts and eMail the manufacturer about the issue, and the number of heads that have gone out (old and new combined) and see what they say. I would suspect they will offer to at least send replacements if you send the receipts and bad heads. I would then return any unused bulbs for credit to wherever you got them, and get different bulbs. You will have to ask the manufacturer if the transformer circuitry can handle MR16 GU5.3 base LED bulbs - Amazon has them, if your heads can take them - will run a LOT cooler. Otherwise, 50 Watt Halogen bulbs should fit and might run cool enough to not overheat ?

 

With transformers in the heads, I would use LED bulbs if compatible with transformer and circuitry.

 

BTW - you did not say if you tried the "dead" bulbs in the "good" heads - my guess (do just a short test) is they will work, and the bulbs are not the problem at all - it is the transformers.

 

Your other option. and what I would do unless you are attached to this style fixture or it is mounted to ceiling permanently and you do not know how to change it (or don't want to), so would cost about $125 for an electrician to come out: is to get what you can in refund from the manufacturer (or distributor, if they have good defect return policy), scrap the whole system, and save a LOT of money in the long run on energy costs by going to a 120V CFL or LED bulb system. Use LED if this is a short-term use system, or CFL only if one that will be on for many hours at a time - they burn out quick in frequent short use applications, but go seems like forever in long term use. I have one 60W (equivalent) GE CFL that I use as a nightlight but stays on 24/365 and has been on continuously for over 4 years without burning out. A number of identical ones we tried in applications where they were only on for a few minutes at a time went back under warranty after in a few months. If you are looking for a true "spot" light, then I recommend LED anyway, unless you don't like their "artificial" light.

 

Here is the info sheet on your unit, with company contact info at bottom:

http://www.noralighting.com/uploads/specs/NTL-202_2202.pdf

?

Depends a tremendous amount on access - if accessible from exposed-joist in attic above, then you might get this for about $300-500 or so for the wiring and installation, plus $200-400 for the materials and dimmer switches, plus the cost of the light fixtures themselves. Probably about $100-150 to repair ceiling if single hole for one fixture, to $200-300 if existing trough-type flourescent fixtures. Painting the repair could be $100 - 250 depending on whether he can match the patch, or has to repaint the entire ceiling to get a uniform effect - which is more common in kitchens, which usually have untextured ceilings and gloss paint. Another alternative it is have the hole patched and prime and plain paint it yourself, then cover the area with a decorative emblem or crest to avoid having to repaint the whole ceiling. Personally I would just put a compatible style fixture in its place, which you might or might not choose to use, so you avoid the cost of repairing the hole and painting entirely, as that is "lost" $.

If the kitchen/dining room ceiling is not accessible from above, then the electrician will have to tear into wall and ceilings, so installation labor might go to $400-600, and drywall reapir and painting probably to about $400-600, depending on how many holes the elecrtrician has to put in and assuming entire surface painting to get a uniform paint look on each disturbed wall or ceiling.

One possibility for savings might be low voltage lighting for some of the kithcen fixtures, which might reduce your wiring cost and number of holes if you do not have attic access.

Be careful on the dimmable LED bulbs - be aware that dimmable bulbs generally cost a lot more, and many brands don't perform well in dimming mode because they are designed to run at a constant voltage, and a lot will not dim past about 40% power before they flick out or start flickering. Some will actually fry the electronics and burn up at lower voltage. Also, there are three different types of dimmers and different bulbs need a different type dimmer switch, so you will have to be careful to always buy the right type bulb, and use all the same type bulb in a given circuit. Here is an article on the types of problmes you can have with LED dimming, even with bulbs designed to be dimmed -

http://www.lutron.com/en-US/Education-Training/Pages/LCE/DimmingCFLsandLEDs.aspx

Lighting Installation reviews in Port Clinton

N

Rating
The electrician that came to the house was professional and a nice guy. The problem I had with them was that he took the information back to the office and they were supposed to send me the estimate. A month later I had still not gotten anything so I called thinking maybe there was a problem or something. I got no explanation just that he would "re-send" it. It took several days more to actually get anything at all. First came a bill for $42 to provide the estimate, then the estimate itself which didn't include two of the three things I wanted them to provide an estimate for. Very frustrating. I think the electrician was good but not real happy with whoever is running the office. The estimate for the part of the work they did provide I thought was a little on the high side but still in the reasonable range. If they had been more responsive, I would be more inclined to have them do the work but I'm going to use someone else instead.
- Greg D.
F

Rating
This past week I purchased a Casablanca ceiling fan. I also purchased a "fan fitter" to which lights are attached and a glass cover. I picked up the fan and related items this past week and they were installed by an electrician on
Port Clinton Lighting Companies Provider Name Locked
24, 2015. It was subsequently determined the glass cover was the wrong part. On the box that contained the "fan fitter" there was a list of compatible glass covers. The glass cover given to me was not on the list of compatible parts. On
Port Clinton Lighting Companies Provider Name Locked
24, 2015 I went back to the store to get the correct part. According to store personnel, they called the factory and were told the part I was given was the correct part. I was then given another glass part, still not on the list of compatible parts and sent on my way. I was also given the name and number of a representative to call if the part did not fit. When I got home I tried to install the part I was given but without success. In my opinion,
Port Clinton Lighting Companies Provider Name Locked
couldn't wait to send me on my way and wanted to be done with this transaction. I will certainly never buy anything from them again.
- robert M.
A

Rating
I have inherited this company with house purchase. Oh, boy! I am so happy I did. We have no mosquitoes in our backyard!!! Owner (
Port Clinton Lighting Companies Provider Name Locked
) is very honest and responsive. Just ask for help and you will get it. Price is fair. Chemical is pretty safe ( I checked!). Technician are very professional and fast
- Natalia F.
A

Rating

Port Clinton Lighting Companies Provider Name Locked
welcomed me into her store. There is easy parking on Main St in Alachua. She showed me catalogs of lighting fixtures and helped me chose. She made the process easy by quoting the price and understanding quickly what I wanted. I had time to decide, and was provided with an estimate in writing that included all the details. The fixtures were delivered on time, and I am very happy with the results.
- Barbara C B.
A

Rating
Port Clinton Lighting Companies Provider Name Locked
and his son are total gentleman and very professional. The son was prompt, courteous and treats you like you’re the only customer in the world. The price was for a whole day.
- Helene F.
D

Rating
This was not a positive experience. I was trying to communicate with the owner by email and phone and it took me like 2 months to get a hold of him. He was not answering my questions and it took 3 or 4 months to get them here and it was a lot of up charges when they got here. They got a drywall person that left a whole lot of mess.
- Julia T.
A

Rating
This waterfall issue was due to a poor design and
Port Clinton Lighting Companies Provider Name Locked
was able to correct the design and fix it. He also looked at the lighting and made a proposal to do some work which I had wanted. It was great to work with him. I had ideas of what I wanted. He had the experience to take that info and create a beautiful effect in our front and back yard. After the work the place was clean. He and his staff are friendly, efficient, and very professional.
- James S.
N

Rating
Arrived in time period promised. Totally professional in work ethic and courteous. Performed total cleanup afterwards and even did an unrelated "quick fix" not on job order.
- Frank S.

Lighting Companies in Port Clinton, OH

Companies below are listed in alphabetical order. To view top rated service providers along with reviews and ratings, Join Angie's List Now!

Audio Video Interiors

7204 Pearl Rd
Cleveland

Captain Fix It

1118 Lake St
Lakeside Marblehead

Classic Copper Works

9337 Spring Cypress Rd

Collectors-Outlet

76 Pulaski St

Coppeler Heating & Electric

2366 E Harbor Rd
Port Clinton

Custom Deck & Porch Co

4208 Campbell St
Sandusky

DirectBuy of Indianapolis

8450 Westfield Blvd

Gasser Builders Inc

2215 Eastern Rd
Rittman

HOSKINS INTERNATIONAL LL

5116 Ohio 119
Minster

J&J Contracting

330 Water St
Shreve

Jack Reiman

4495 W Darr Hopfinger Rd
Port Clinton

Kiddie Kastle Baby & Teen Furniture

4600 Shelbyville Road Plaza

Laura's Designs

405 East Mission Street

R Hammond Construction

1600 Middle Ave
Elyria

Radiant Windows LLC

101 N Benton St
Oak Harbor

Renewable Engineered Systems

22 East Church Street

Sebastian Construction

16514 Highway 10 N

Solarian US

2617 Saint Davids Lane

SR Services

1485 County Road 268
Vickery

Stark Art Glass

36 Dalton St

WEBB ELECTRICAL CO

PO Box 70866
Port Clinton Zip Codes

Join Angie's List to get the best local reviews in Port Clinton.

What Does My Membership Include?
  • Instant access to reviews for 700+ services
  • Exclusive service discounts - up to 70 percent off!
  • Top-notch support from our live call center
How does Angie's List work?
1. Say you need a Lighting Company
2. Angie's List has tons of detailed, local reviews.
3. Find a winner, and book them.
4. Angie's List is there to resolve any issues.
CBS
Good Morning America
Fox News
USA Today
The Wall Street Journal
MSN money