-Find top-rated Service Providers

Find Top-Rated Nashua HVAC Contractors

Angie's List helps you hire the best - and avoid the rest!

HVAC Contractors to Avoid

1.3K

Top Rated HVAC Contractors

215

Prevent buyer's remorse with us

  • Over 3 million people trust Angie's List to help make the right choice
  • Be informed to avoid costly mistakes
  • Shop with us to ensure a fair price
  • Our complaint resolution team will help if a project goes bad
+See Verified Local Reviews

Over 16,336 reviews for
Nashua HVAC Contractors from people just like you.

A
"The
came and was very friendly. He checked both of my intake vents and would have changed the filters if I had replacements. He went up into" the attic, where I couldn't follow and check the system there. He then went outside to add Freon to the unit.

-Michael H.

A
"Within 15 minutes of leaving an after hours voicemail,
responded about my outside unit not running. He advised me to leave it off for the" night and that he'd be by the next day to take a look after he finished two other appointments. He quickly determined the problem, fixed it, and topped off the freon. I was relieved that he didn't suggest a new unit because due to the age of the system we'd have to replace both the outside unit and the air handler inside.
took a look at our air handler (I probably intrigued him after explaining all of the logistical issues with it!) and he provided a good suggestion to keep the coils cleaner. He recommended I followup with him in fall/winter for a system checkup. He was very professional and lived up to everything everyone else says in the other reviews. Two years ago I had another company come out for a system checkup and they push hard for me to replace the whole system. Thank you,
for not putting that pressure on me. We'll replace it someday and when we do it will be with
!

-Michelle D.

+Shop, Schedule, and Save on Services

Shop, Search and Save from anywhere!

  • Offers are exclusively provided by highly rated companies
  • Angie’s List members have access to exclusive discounts on local services
  • Shop, schedule, and stay on top of progress from any device
  • Our 30 Day Refund Guarantee means you can buy with confidence!
+Join 2 Million People on Angie's List

Over 2 million people trust Angie's List.

  • Your Membership Includes:
  • Instant access to top rated businesses covering 700+ services
  • Our Complaint Resolution Team to help when a project goes bad
  • On-the-go access to our iPhone, Android, & iPad apps
Find top-rated Service Providers
See Verified Local Reviews
Shop, Schedule, and Save on Services
Join 2 Million People on Angie's List

Local Articles in Nashua

Hiring an HVAC service

The awkward-to-pronounce acronym stands for "heating, ventilation and air conditioning" which in many respects are completely different processes.

AIDGkAau1Ng

HVAC Maintenance

You can help your heating and cooling systems work more efficiently and last longer by tending to regular maintenance. Some things, like changing the furnace filter, can easily be done by the homeowner.

Worker installing vent with drill
Heating & A/C

Just because your house doesn't have central air conditioning doesn’t mean it can’t be added.

frozen A/C coils inside an air conditioner
Heating & A/C

Protect your A/C in the summer heat by looking out for these common causes of freeze.

central air conditioning unit on slab
Heating & A/C

A/C systems last between 10 and 20 years, so you'll probably buy a new one at some point.

technician installing HVAC unit
Heating & A/C

The price tag on a high-efficiency A/C may not reveal the lifetime savings on energy costs.

Angie's Answers

?
what should you pay.  You pay what you can afford.  1100sqft unit requires a min. of a two ton unit.  prices range from 2100-2900 depending upon the seers of the system.  13 seer is the min. the law requires  and for your situation with 1100 sqft.  do not worry about the seers as long as it is to code.  the bigger the house the more seers for economy.  1100 sqft is at the border line for a two ton system.  It is more important to have your new system balance, there is where you get the economy on your electric bill and gas.  Bryant, lenox, ruud and carrier are the brands you should stay with.All have the same basic factory warrantee and will last you longer than you expect as long as you maintain it with regular check ups twice a year once in the spring and then in the fall.

raymond gonzalez
koolray heating and air
 clarksville,tn
?
The only thing of importance, is the hvac professional you choose to use. Alot of manufacturer's pieces are built relatively the same, and will last about the same amount of time. The thing that matters most is what you can not compare between companies, and that is the installation. Purchasing a system is not like purchasing a car, where no matter where you buy it, they are all the same. Each installation is different, and usually what you are paying for is the level of expertise, and quality of the installation, the company who will actual give you the warranty, and the comfort that you will receive. Manufacturers warranties disappear every day. They always have a loophole where they can get out of paying, but your local dealer wants to keep you happy for future work, and to protect his reputation in the communiy. Look up 4 year old Nordyne and Goodman warranty problems. Choose the HVAC professional first. It will cost you the least in the long run. I have had to totally redo plenty of installations that were just performed because of an uncomfortable customer, and a system that keeps breaking down. The equipment is only as good as it's installation, and over 70% are not installed correctly.
?
Yes Jupiter. It depends on the severity of the situation, is the mold encapsulated in the insulation. If yes, than replace [insulation] it with new. Is it on the casing of the heater? If yes, clean it with a mold neutralizing metal cleaner. It's not a matter of finding something or someone to clean or address the existing mold. It's a matter of finding a contractor to rectify what is causing the mold grow. It's coming from excessive moisture in the air-handler unit. I can say with 100% surety you’re dealing with poor airflow and/or incorrect equipment sizing! Either issue will cause excessive icing of the evaporator coil, which leads to excessive condensate water in the system. The condensate will eventually overflow the drain pan leaving stagnant water in the air-handler housing, which leads to mold growth. I would not let any contractor do any kind of temporary repair, add any device like a UV light or air-cleaning product until the aforementioned is corrected. I talk a lot about this in my videos and on my website. It is the result of improper system design from unqualified contractors. There is a reason why some guys cost more than others, and this is one reason why!




?
I'd rate them equal,or close,as with several other brands. I'd be more concerned about the difference in installation and service down the road. Difficult to determine the difference ,but asking for detailed info about their installation,may convince you to choose one over the other.

The Dept. of Energy states that poor installations can cause a 30% efficiency loss! Plus with Gas their are saftey issues,venting properly etc.,and of couse the need for a "low Level" Carbon Monoxide Alarm.
?
I think maybe you are confusing SEER, which is an efficiency-related rating (higher SEER means more effective use of the electric power used to compress the gas), and TONS rating, which is a measure of the total cooling power of the system. (Tons used to mean how many tons per hour of ice was used in evaporative cooling building systems - a Refrigeration or Cooling Ton equals 12,000 Btu/Hour of energy exchange. A BTU, which is another antique measure but still used, is the energy needed to change the temperature of a pound of water one degree fahrenheit. Unfortunately, because of varying humidity and evaporation, this is not readily related to house air heating or cooling without a lot of assumptions and some computations. Relating this to today's world - the Manuals BayAreaAc referred to account for all these energy conversions and determine an estimated cooling (or heating) requirement for your specific house. The type of construction, solar exposure, general climatic conditions such as average temperatures, humidity, and hottest and coldest normal ambient temperatures and desired inside temperture are all taken into account in the more sophisticated versions of the analysis, so there is no "standard", though a rough old rule of thumb was about 1 ton of cooling per 500SF of house. Obviously, this was a WAG only because it did not account for insulation, type of roofing, whether you live in Alaska or Miami, etc. The ACCA manuals do a very simplified form of evaluation to arrive at a "design", which generally will be adequate. OF course, highly precise calculations are not really needed because A/C units generally come in even ton ratings - so if you are at say 2.6 ton requirement you will be getting a 3-ton unit anyway. SEER ratings are not a direct measure of efficiency, but the relative difference between ratings gives you good idea of the unit's relative efficency in using electricity - so a 16 SEER should be about 19% more efficient (so roughly comparable lower electricity bill) than a comparably sized 13 SEER unit. 13 SEER is the lowest efficiency currently allowed to be built for general use, 19 SEER is about the highest efficiency made by pretty much all manufacturers, and about 25 SEER is the highest rated though very pricey shelf-item units, though special construction custom units can reach about 30 SEER. Note however, like any government sponsored rating, much of it is hooey when you get down to it - for instance, SEER ratings are figured based on 80 degree inside air temp and 82 degrees outside, when that is far from the normal case of mid to low seventies inside and high eighties or above outdoors. This makes the absolute SEER rating meaningless, but relative numbers still have meaning in comparing units. Note these efficiency ratings are for conventional air conditoners and heat pumps working in ambient air conditions. Ground sourced Geothermal or lake/river exchange cooling units, though initially more expensive in most cases, can greatly exceed the air-exchange unit efficiencies because they are exchanging heat with cold natural water rather than with a high-temperature outside air, and instead of continually compressing a gas are just circulating cold water. I worked on one geothermal cooling project which had almost infinite efficiency, which of course makes no sense - but the only power was for sensors and a control valve as the water flow was single-pass under gravity flow, so no power was used to circulate the water.
?
YOU.
You bought the home after an inspection that told you there were issues?
Every state has different laws regarding home purchases, contact your real estate agent to find out what remedies may apply.
THIS IS EXACTLY why you hire QUALIFIED and LICENSED contractors.

Doug
AirTekHP
CSLB# 824188 

Hvac reviews in Nashua

A

Rating
Service went well, both technicians took time to explain the whole process before they did any work. In addition they answered all my questions to satisfaction. Every single time they enter the house shoes/boots were cover with disposable booties to avoid bringing dirt inside. Both took their time to check and review everything they saw and consulted with other technicians to make sure they did not missed anything. I am very satisfied with this company and if ever need any other type of service (plumbing or electrical) they will be the first to call. Receiving and email with a picture of the technician right the phone call to confirm arrival is a great customer service point that makes a customer comfortable.
- ARIEL R.
F

Rating
Nashua HVAC Contractors Provider Name Locked
misdiagnosed the water leak, blaming our hot water heater rather than the pump connected to the furnace humidifier. They gave us a wildly inflated quote for replacing the hot water heater (which we didn't need to do). When we proved to them the next week that the problem was the pump, they finally fixed the actual problem....More /> we've also been trying to get a quote from them for 2 years on replacing the furnace with a newer model. We thought they would be a good choice, since they've maintained our old furnace for us for the past 10-15 years. Unfortunately, they keep promising to send us a quote and not sending it.
- Lisa H.
A

Rating
Nashua HVAC Contractors Provider Name Locked
was great! He fixed the problem quickly, showed me why the poor installation caused buildup of residue causing blockage.
He gave me suggestions on how to prevent recurrence of this problem and made suggestions as to how often to have preventative maintenance performed. We were very disgusted with the original installer who had tried to charge us an extra $2000 when the electrical inspector would not approve their lack of knowledge of code. As a result, we ignored yearly maintenance suggestions.
Nashua HVAC Contractors Provider Name Locked
had a long list of appointments (as did the three other companies I contacted) due to the extreme hot weather. We elected to do the repair on overtime rather than wait three to four weeks when we were miserable with the heat.
Nashua HVAC Contractors Provider Name Locked
was excellent in every way. Knowlegable, professional, friendly, and willing to answer all of our questions in terms understandable by the layperson.
We highly recommend
Nashua HVAC Contractors Provider Name Locked
and plan to use this company in the future
- Eleanor T.
A

Rating
Nashua HVAC Contractors Provider Name Locked
was easy to work with, responsive and a more reasonable cost than the other bid, which is a larger company (Strand). Highly recommend them
- Joseph K.
A

Rating
I called around 7:15 Saturday morning and left a call back number with the answering service. I got a call back before 8:00 and
Nashua HVAC Contractors Provider Name Locked
, the technician, was at my house shortly after 9:00am, after doing a repair for another customer. He found the issue quickly, pick up the part and had the AC running less than 2 hours after he arrived. He was courteous and very professional.
- Ami R.
A

Rating
Of course, it's a Saturday and my AC went out this morning. Just stopped, figured it had been working too hard the last close to 100 degree days. I checked Angie's List and found one local with current reviews. Called
Nashua HVAC Contractors Provider Name Locked
, got the answering service.
Nashua HVAC Contractors Provider Name Locked
called back within the hour and arrived 20 minutes later. Proffessional, pleasant to work with. Checked through the system and left it all working good.
- John A.
A

Rating
All HVAC crew members were very professional, courteous, and helpful if questions
Nashua HVAC Contractors Provider Name Locked
from me. In addition, all were noticeably very “hard working” with a special commendation to “
Nashua HVAC Contractors Provider Name Locked
.
- Rishi & Kathleen Z.
A

Rating
They came out to our home, well my moms home and unclogged the toilet and then we found out we had a couple of other clogs. The pricing was great, customer service was good, very professional young men. I will be referring them to our whole church.
- Chasedie H.

HVAC Contractors in Nashua, NH

Companies below are listed in alphabetical order. To view top rated service providers along with reviews and ratings, Join Angie's List Now!

A & E COMMERCIAL AIR

155 Main Dunstable Rd Ste 145
Nashua

A J Wood Construction Inc

337 Haverhill Rd
Chester

ABLE ELECTRICAL CO

PO BOX 633
Atkinson

Absco Heating

74 Massabesic St
Manchester

Absolute Home Comfort

151 Veterans Rd.

Academy Hill Plumbing

19 Academy Hill Rd

Accu-Tek.biz

21 Spring Street
Pelham

Accurate Care Services Inc

5475 NW St James Dr

ACCURATE PLUMBING & HEATING

190 TINKER RD
Nashua

Achieve Renewable Energy LLC

100 Cummings Ctr Ste 211C

Acton Plumbing

336 Great Rd.

Aegis Comfort Systems Inc

6 Shady Ln
Merrimack

Affordable Services LLC

22 Roosevelt Ave.

After Hours P&H LLC

P O Box 485
Brookline

AGS Services Inc

78 Depot Hill Rd
Henniker

AHC MECHANICAL

17 INCA DR
Nashua

Air Design Services Inc

39 Brinton Dr
Nashua

AJ LeBlanc Heating Inc

45 S River Rd
Bedford

Al Terry Plumbing And Heating Inc

1776 Hooksett Rd
Hooksett

Beach Ave Plumbing

6 Beach Ave.

Beach St Plumbing

12 Beach St.

Bedford Plumbing

50 Concord Rd.

Bedford Plumbing

180 Great Rd

Better Air

1265 John Fitch Blvd

Better Comfort Systems, Inc

1310 Eastern Avenue

Boylston Plumbing Company

1345 Boylston St.

BP Plumbing and Heating

209 Boston Post Rd

BRAGDON PLUMBING & HEATING

109 INTERVALE RD
Wilton

CLIMATEC

8 OTTERSON ST
Nashua

CML service

18 Albert Ave.

Coastal Heating & Cooling Specialists

33 Mill Ln.
Hampton Falls

Cobb Hill Constuction

206 North State Street
Concord

DMI LLC

5 Northern Blvd Ste 5
Amherst

DMR Services

140 Burke Street
Nashua

DO IT NOW

159 Maple St

Dr. Home Service LLC.

955 Goffs Fall Road
Manchester

Dracut Plumbing & Heating

505 Merrimack Ave.

DRAIN PRO/PLUMB CRAZY

PO Box 487
Milford

Dustin Page Mechanical

122A Back River Rd
Merrimack

E & S Mobile Service Inc

166 Commonwealth Ave

E R Electric

132 1/2 Fifth St

E.T. Radiant, LLC

4 Flagg Road
Previous

Shop Local Hvac Services in Nashua, NH

Nashua Zip Codes

Join Angie's List to get the best local reviews in Nashua.

What Does My Membership Include?
  • Instant access to reviews for 700+ services
  • Exclusive service discounts - up to 70 percent off!
  • Top-notch support from our live call center
How does Angie's List work?
1. Say you need a HVAC Contractor
2. Angie's List has tons of detailed, local reviews.
3. Find a winner, and book them.
4. Angie's List is there to resolve any issues.
CBS
Good Morning America
Fox News
USA Today
The Wall Street Journal
MSN money