Kings Mountain Insulation Contractors

in Kings Mountain, NC

179
Insulation Contractors are
in Kings Mountain

53
Insulation Contractors in Kings Mountain
are top rated

A
Rated by
Michael D.
"These guys are top notch and very professional. The install was clean and the guys were a pleasure to deal with.
N
Rated by
Kendon L.
"Very Well.
came and looked around our house and gave recommendations as to how we could save the most . We have an older house, built in 1949 and was leaking" heat out all over. He was very knowledgable and very helpful. We had foam insulation sprayed in our attic and roof and around the whole house and in the rim joists in the basement. When his crew came, which was actually a day early, they were very friendly and very good at their job. They also cleaned up each day before they left. We noticed after it was done, that we don't hear the noise from the street anymore. We won't know for awhile yet on the gas savings.
A
Rated by
Ali A.
"These guys are pros at what they do! They do insulation and they know their stuff. Immediately knew everything about the rebates, gave me a quote over the phone based on the dimensions" I gave them. I basically called to ask them some questions; in the same call they gave me a quote (which came in much cheaper than the other quotes I had gotten), scheduled the Appt and done. The team showed up on time, did their job, gave me the invoice and instructions on the rebate and I paid with Credit Card - very convenient. They are really honest people, because a portion of the exterior wall ended up already having insulation, so they subtracted billing for billing. Whenever I need new insulation, I'll call them first! Simply put: Fast, easy, Premium service and priced very, very competitive.

Local Articles in Kings Mountain

Winter guide

The Angie's List Guide to Winter Maintenance

It's the time of year when the winter weather can take a toll. Follow this winter maintenance checklist to protect your home, your car and your health.

Without proper insulation and venting in your attic, icicles can form on your eaves, leading to a damaging ice dam on your roof, says Neubecker. (Photo courtesy of Angie's List member Donna B. of Mendota Heights, Minn.)

Avoid ice dams with proper attic insulation

Do you have icicles forming on your eaves and gutters and ice collecting on your roof? An ice dam can cause serious problems without proper insulation.

Angie's List
Appraisals - Real Estate, Architects & Building Design, Basement Waterproofing, Bathtub Refinishing & Liners, Biohazard Remediation, Builders - Garages/Barns/Sheds, Builders - Homes, Cabinet Making, Cabinet Refacing/Restoration, Carpentry - Unfinished, Carpentry - Woodworking, Carpet Sales/Installation/Repair, Chimney Caps, Chimney Repair, Chimney Sweep, Closets, Concrete - Leveling/Mudjacking, Concrete - Pouring & Repair, Concrete - Stamped & Decorative, Countertops, Deck Maintenance, Decks & Porches, Delivery Service, Dock Building & Repair, Doors, Drywall, Dumpster Service, Electrical, Epoxy Flooring, Excavating, Fireplaces, Floor Cleaning/Polishing/Waxing, Flooring Sales/Installation/Repair, Foundation Repair, Fountains, Garage Doors, Glass & Mirrors, Glass Block, Gutter Cleaning, Gutter Repair & Replacement, Handymen, Hardwood Flooring Sales/Installation/Refinishing, Hauling, Heating & A/C, Home Automation, Hurricane Shutters, Insulation, Land Surveying, Landscaping, Landscaping - Hardscaping & Pavers, Landscaping - Lakefront, Landscaping & Lighting, Lawn & Yard Work, Lawn Fertilization & Treatment, Lawn Irrigation, Lead Testing & Removal, Marble & Granite, Masonry, Mold Testing & Remediation, Moving, Painting - Exterior, Painting - Interior, Pest Control/Exterminating, Plumbing, Plumbing - Drain Cleaning, Pressure Washing, Radon Detection & Reduction, Remodeling - Basements, Remodeling - General, Remodeling - Kitchen & Bathroom, Remodeling - Modular & Mobile Home, Remodeling - Sunrooms & Patio Enclosures, Roof Cleaning, Roof Ice/Snow Removal, Roofing, Screen Repair, Septic Tank, Sewer Cleaning, Siding, Skylights, Stone & Gravel, Structural Engineering, Stucco, Tree Service, TV Service - Cable, TV Service - Satellite, Wallpaper Removal, Wallpapering, Window Cleaning, Window Tinting, Window Treatments, Windows, Windows - Egress, Windows - Safety & Security Film, Wrought Iron

Contractors say homeowners with this trait are the most satisfied with home improvement projects.

With insulation technology always advancing, you’ve got choices to make when it comes to the material you pick, says Lindus. (Photo courtesy of Angie's List member Lynn M. of Columbus, Georgia)
Insulation

Thinking of installing your own insulation? One highly rated provider shares six things that every homeowner should be aware of before attempting to DIY.

Before winter arrives, ensure your attic is sealed properly and has both adequate insulation and ventilation. (Photo courtesy of member Kitty Jones of Columbus, Ohio)
Insulation, Heating & A/C, Roofing

A comfortable, energy efficient home starts at the top. Those hot spots and cold rooms may relate to problems in your attic. Beyond adding insulation, what's a homeowner to do?

Download the Angie's List Fall Maintenance Guide to get started on protecting your home from potentially damaging winter weather. (Graphic design by Matt Mukerjee)
Heating & A/C, Deck Maintenance, Lawn Fertilization & Treatment, Water Heaters, Plumbing, Roofing, Gutter Cleaning, Garage Doors, Fireplaces, Chimney Sweep, Insulation, Auto Service, Foundation Repair, Lawn Irrigation, Tree Service, Windows

When tree leaves and temperatures begin falling, it's a sign winter is on its way. Use this fall maintenance checklist to protect your home from winter damage.

Angie's Answers

?

Google and read about it. Some people swear by it, though their comments sound suspiciously like they were all written by the same person. Some call it a rip off - expecially people paying $6000-8000 for what would normally be a $1,000 range job.

I would not call it an outright fraud as they are providing a product that has some potential merit in the right application, but from a technical standpoint it sounds suspicious. They claim a 1/4 mat with doiuble sided foil facing is R-16 insulation. This at least is deceptive - they appear to be saying its radiant heat reflective properties give the equivalent of R-16 insulation, because there is NO WAY 1/4" foam is going to yield R-16 in an ASTM test for insulation, which is a thermal conductivity test. Would be lucky to get R-2 or so as an insulator, so this is basically a radiant barrier. Competing products from national brandname manufacturers list R value of 3.8-4.2 for one inch mats, so the equivalent for this 1/4" mat would be expected to be in the R1 range.

Properly installed, with ventilation on BOTH sides, it can be slightly effective in reducing radiant heat loss from the house, and more effective in reflecting heat in the attic from coming down into the house. However, from a thermodynamic and vapor control standpoint, they are trouble unless their integration into the house envelope is designed VERY carefully. Short explanation:

1) for keeping heat in the house, if they are installed above the attic floor insulation they can slightly limit air loss through the ceiling, and reflect radiant heat back down, resulting in warmer insulation, hence a warmer ceiling - but not as marked an improvement as added insulation would give.

2) for keeping attic heat from getting into the ceiling, they do reflect back a good portion of the radiant heat coming from the roof sheathing. This reduces the attic floor insulation surface temperature, so can reduce air conditioning cost. it does increase teh temperature in the attic, which can be very bad for support timbers and the roof sheathing.

3) the worst thing about how this type of foil radiant barrier is used is that, unless it has free air space on both sides, it acts as a vapor barrier. In the typicall application as a blanket over attic floor insulation, it traps any moisture coming up from the house, and can cause mildew and rot, especially in climates where the outdoor temperature gets quite cold.

4) the attic fans are generally a last resort measure - the normal house does much better, at no energy cost, using ridge vents with adequate eave openings to provide ventilation and cooling in the attic.

5) their effectiveness in winter heat diminshes rapidly with time - tests of attic radiant barriers show they lose about half their effectvieness within 5 years, because even a light dust coating greatly reduces their ability to reflect radiant heat, and greatly increases the absorption of heat from the hot air above them.

6) pay attention to cost - from what I see, their installed cost is many times the cost of normal insualtion or radiant barrier placement.

I would say, in summary, buyer beware, and I would be inherently leery of a product being sold the same way timeshares and "secret" moneymaking schemes are.

?

Obviously this is not a timely response to the initial question. However, for those who may be reading these answers at a later time, a couple of added thoughts:

1) the radiant barrier being discussed is basically heavy-duty metal foil or metallized surface on a plastic sheet, intended to reflect RADIATED heat (infrared radiation - think heat light, or heat you can feel at a distance radiated from a fireplace), the same way a mirror reflects light. Radiated heat is how a standard oven broils and how steam and hot water baseboard heat predominately work.

2) you generally should do NOT place a radiant barrier over the insulation that lies between and over the joists in a normal attic, especially in a region where the attic temperature can frequently reach condensation temperature (below about 45-50 degrees) - it may reflect back some of the house heat that is coming up from the house, but by destroying most of the temperature gradient from the house to the attic air destroys much of the driving force that moves moisture to the attic air and subsequent venting. Between that greater heat and the fact the barrier is also a moisture barrier, that makes a perfect condition for mold and rot in your insulation and attic wood, and has become quite an issue in energy upgraded homes because of retrofits that cut off airflow outside the insulation, but do not cut off the moisture source leaking thorough from the house. The proper and ONLY place for a vapor barrier in a normal attic insulation system is on the pressurized and normal warm, humid side of the insulation zone - directly above the ceiling drywall in the top floor, fastened to the UNDERSIDE of the ceiling joists or trusses, NOT anywhere above that. Perforated barriers are supposed to reduce this tendency, but the perforation area percentage is so small that typically they still act as a vapor varrier, just not a totally effective one.

3) radiant barriers reflect radiated heat ewith up to 99% efficiency but have basically zero resistance to CONDUCTION (body to body heat transfer at points of contact - think heat transfer from your warm hand to a frozen cold drink can, or hot pavement heat transfer to the bottom of your feet) - so there needs to be an air gap between the radiant barrier and the hot item passing the heat to it, otherwise the heat will just pass through it by conduction. Therefore, applying it directly to the sheathing (above or below) or manufacturing it directly on the surface of the sheathing defeats its purpose, even though this is commonly done.

4) there is a lot of discussion, particularly in the professional design community, about attic radiant heat barrier effectiveness and problems. Because they are being installed on the bottom of the sheathing or underside of roof joists, they act as a heat trap for the energy being conducted through the roof which would normally radiate into the attic air or be transferred by CONVECTION (fluid flow heat transfer) to the attic air, and be vented through roof vents, ridge vents, gable vents, etc. By trapping that heat, they are causing the underside of the shingles and particularly the felt and sheathing to get a lot hotter than they otherside would, essentially changing it from a system where the shingle top surface might reach 120-180 F and the inside surface of the sheathing about 80-140F in the summer, to making the entire roof system equal to the outside surface temperature. This causes more rapid shingle deterioration and cracking, and makes the felt or plastic moisture barrier under the shingles brittle and subject to failure.

Also, any moisture above the radiant barrier (from roof leaks or humid air coming into the area) is prevented from evaporating by the attic airflow which would normally remove it, so it starts acting like a steamer. I have seen both wood and metal lofts and attics become a major mold farm in months because of this effect, and a couple of roofs which started sagging due to rotted sheathing within 2 years of reroofing with tightly adhered radiant barrier. Some radiant barriers are vapor-permeable to reduce the moisture issue, many are not, but few actually are effective in letting moisture freely escape.

Having seen these products in use, and having analyzed and specified building products for use from the Middle East to the Arctic for decades, and having a Masters in Arctic Engineering (a degree predominately in energy conservation and heat flow), my personal opinion is that these radiant barriers will be banned by code within 10-15 years for unheated (so-called "cold" roofs) roofs, because they just do not use the principles of thermodynamics correctly. For more info on this issue Google the following search phrase  - moisture trapping by radiant attic barriers       and read the government (not the manufacturer) literature on the issue.

5) Unfortunately, the right way to handle this issue is to put the radiant surface on the OUTSIDE of the house - by using reflective materials on the roofing material. This is already done with flat roofs, house trailers, and industrial structures by spraying with alumiunum paint, and a few brands offer reflective aggregate shingles that are slightly more reflective and radiant than normal shingles. People obviously do not like this reflective surface from an aesthetic standpoint, though with solar cells coming into more general use this may soon be more widely adopted. The idea should be to keep the solar energy from penetrating into the building envelope at all, not try to re-reflect it away after it has penetrated throguh the roof system.

The sprayed-in foam has a couple of issues you need to be aware of:

6) it needs to be the low-pressure expanding type mixed for use around window frames, as fully expanding foam can bow joists or trusses and pop drywall ceilings free as it expands, and non-expanding foam actually shrinks as it cures, leaving gaps for air and heat flow alongside the ceiling joists.

7) being closed-cell it is essentially impervious to moisture, so the vapor barrier on the house side has to be EXCELLENT (incuding sealingof all penetrations), or it will trap household moisture escaping into the attic and promote mold and rot in the ceiling drywall and joists.

8) it tends to bleed chemical fumes into the house for a long period of time (can be noticeable for years), which may be objectionable to some people from an odor or environmental standpoint, and especially should be considered if any residents have severe allergy issues or respiratory problems.

9) I emphatically recommend AGAINST use of sprayed-in foam between ceiling joists or truss members in any area that can have cold attic air that could cause moisture condensation in the insulation, though this is probably not a significant problem where you live, assuming your Dallas is the city in Texas. For essentially year-around air-conditioned homes in hot climates, the problem can actually be condensation of attic air moisture on and in the colder ceiling surface insulation and on cold attic runs of air conditioned air, so attic ventilation becomes a critical issue to remove the moisture before it condenses.

In summary, having seen an awful lot of attic moisture and thermal problems, my personal recommendation would be to ensure excellent sealing of the house from the attic, use normal UNFACED fiberglass insulation, and instead of a radiant barrier ensure adequate full-attic ventilation. If you decide to got with a radiant barrier, then I would recommend a perforated one, sloping up towards the sides a foot or two and stopping a foot or so clear at the sides so moist air under it can escape to the roof joist spaces and be vented from the attic. I have seen this done several times with a fine nylon net strung above the insulation in the attic, supporting the barrier, resulting in something very similar to the double-roof system used in bedouin tents, where airflow between the two layers keep the hot air away from the living space.

?

A couple of comments about what Jim said:

1) Regarding type of insulation, in cold winter environments: Cellulose and fiberglass are actually about comparable in R value when installed - blown in cellulose runs from 3.2-3.8 R value, fiberglass batt 2.9-4.3 R value depending on manufacturer and whether hig-density or low density, high-efficiency or standard, according to official Department of Energy publications. Measured values in attic test cases, in areas with a true winter, after 10 years showed a decrease from 3.4 (in the test case) down to 2.1 for cellulose, and 3.5 to 3.3 for fiberglass batt, due to packing or matting. In an attic environment, there WILL be condensation or frost on the insulation at some point during the year (assuming an area with true winters) and in highly insulated houses commonly for a substantial time period each winter. Fiberglass packs down slightly from that weight but mostly rebounds, cellulose packs down and mats and does not substantially recover, so over the years cellulose loses 1/3 to close to 1/2 its insulation value, fiberglass about 10%.

2) a note on radiation barriers attached to the bottom of the rafters - there are a lot of installers and homeowners making two major mistakes with this product that can cause major trouble: First, be sure to terminate it short of the eave openings. I have seen cases where it was carried all the way out to the fascia board, thereby blocking all airflow on the underside of the roof. Even carrying it all the way to the eaves along the bottom of the rafters will block off ventilation to the main attic area. You have to leave the air space between the rafters open to full airflow from the soffit/eave area ot the ridge vent. Second, do NOT run it continuous from eave to eave across the full width of the attic - leave a gap about a foot wide under the ridge vents so warm and moist air in the attic can vent through the ridge vent. Closing the ridge vent area off with the radiant barrier effectively puts a vapor barrier around the main attic area, causing retention of the moisture which WILL accumulate there, promoting mold.

?
Steve made a good point.  Also, while it isn't required to remove the old insulation you can check the ductwork, wiring, etc. with the old stuff removed,  You can also spray foam around all openings and holes in wall top plates to better seal your home as Steve was pointing out.  My concern is the potential for mold spores you mentioned in your question.  If you suspect there are any get a good company in to remove the old and clean the attic.  Another concern is asbestos.  Your home is old enough you could have it in there and that's worse than mold if released into the air.

Todd Shell
Todd's Home Services
?

Have you checked Angie’s List? Angie’s List Answers is a great place to find advice from professionals, but for ratings, reviews and information to help you hire the companies you need, visit www.angieslist.com today.

 

 

?

Insulation reviews in Kings Mountain

A

Rating
They arrived punctually as promised. (This was my third job by
Kings Mountain Insulation Contractors Provider Name Locked
). They performed their work neatly. At the end of the job they explained what was done, how it worked and tested the heating system in my presence. In my 50 years of home ownership, few have come to equal their professionalism.
- Juergen D.
D

Rating
I'll share the bad first because that's the message that's worth communicating.
Kings Mountain Insulation Contractors Provider Name Locked
lied to me about the work they performed, and has not responded to my request to confirm the work they said they would do.
When
Kings Mountain Insulation Contractors Provider Name Locked
from Green Guard Energy and his partner arrived, we were at the tail end of having our house re-wired to eliminate knob and tube wiring. The electricians had also installed two bathroom exhaust fans and were behind schedule on venting those two fans to the exterior soffits.
Kings Mountain Insulation Contractors Provider Name Locked
said they could attach flexible vents to the two fans and put the vents in the soffits; he added that it was perfectly acceptable and to code to do this and there would be no potential adverse effects from the humidity released into the soffit space. We agreed to this, and thought it was great he was willing to do this for us.
We had just purchased the home in February of 2014, so I contacted the home inspector who evaluated the home before closing to confirm that not venting the exhaust fans to the exterior was ok. The inspector said this was not acceptable because there would not be an efficient way to release the humidity from the attic and there was increased potential for moisture problems to be created in the attic space as well as potential moisture damage to the insulation.
So, after the insulation work was complete, we asked the electricians to continue with their plan to vent the fans to the exterior. I emailed
Kings Mountain Insulation Contractors Provider Name Locked
to ask him where the flexible vents were terminating in the soffits, so I could give direction to the contractor who was coming to vent them to the exterior. I didn't receive an e-mail back. I called
Kings Mountain Insulation Contractors Provider Name Locked
and got him, and he said they went directly from the fans to the soffits.
When the contractor came to complete the work to vent the fans to the outside, he confirmed that no flexible vents were installed by
Kings Mountain Insulation Contractors Provider Name Locked
and his partner. Nothing. This meant the fans were venting directly into the ceiling space.I e-mailed
Kings Mountain Insulation Contractors Provider Name Locked
to communicate this to him and to confirm that he and his partner has done what they told me they would do, and I have received no response two weeks later.
While the rest of their work appears to be fine, I would never use this company again simply because they are dishonest.
I'd be happy to share any other details related to this company.
- Matthew H.
A

Rating
Himself and his crew arrived on a Friday afternoon, they went to work immediately.
Kings Mountain Insulation Contractors Provider Name Locked
and crew spent nearly 12 hours removing all my old insulation in my upstairs. The following days were both about 12 hour days for him and his crew. While part of his crew was removing insulation, some workers were repairing soffits. The entire crew was pleasant and respectful. Himself and his crew made a typically stressful situation into an easy one. They were even able to remove the old insulation threw a window, thankful that I have that option. This allowed them to remove it without dragging it through my home. I highly recommend him to anyone looking to replace their insulation. I can truly feel the difference in my upstairs rooms. It has definitely made my house more comfortable overall.
- betty P.
A

Rating
I scheduled an energy audit with Columbia Gas --- the audit recommended the air sealing and I would get a nice rebate on the service at the time of service and a follow up rebate from Columbia Gas. I scheduled the air sealing with
Kings Mountain Insulation Contractors Provider Name Locked
because they were on Angie's List. The technicians came as scheduled and did the job as planned.


- PAT M.
A

Rating
The guys arrived on time and were very pleasant. They put a large tarp on the ground outside and were able to pass the insulation out through the attic window so that none of it got in the living quarters. They also closed the attic pull down stairs at one point to contain the
Kings Mountain Insulation Contractors Provider Name Locked
insulation in the attic. I thought that there might be pieces of insulation on the driveway or in the yard after they left, but they did a great job of cleaning up and left no debris. They did a good job with the mastic as well. I was happy with the job and will contact them again for future insulation jobs.
- Lisa W.
A

Rating
Quality of the work was excellent and the return to complete the job was prompt. Advice to use closed cell insulation on the block walls and open cell on the ceiling/under the house’s floor made good sense and was unique among the contractor’s I surveyed. Moreover, the price was the best I found. Highly recommend.
- Joel L.
A

Rating
Our home is not standard wood frame construction, it consits of outside face brick, with larger
Kings Mountain Insulation Contractors Provider Name Locked
blocks as the support structure and lathe/plaster in the interior. The house was built in the late 1930's and had NO insulation until 9/24/14. We have lived in the house for 25 years and during the winter when you touched any outside wall it would be cold as a meat locker, even our dishes and glasses in the kitchen cabinets would be cold. And of course, our gas bills during the winter were always outrageous. Recently I had wondered if insulation could be injected into the
Kings Mountain Insulation Contractors Provider Name Locked
blocks, well as it turns out, insulation CAN be injected, but not in the blocks. Between the blocks and the outside face brick is a 1.5 inch gap. I saw this gap myself a few years ago when we had an unused side door removed and replaced with glass block. I went to the hardware store and bought aerosal cans of foam and filled this gap all the way around the door frame.

Anyway, this past January I started looking online for information on foam insulation and on Angies List to see reviews.
Kings Mountain Insulation Contractors Provider Name Locked
was highly rated so i gave them a call.
Kings Mountain Insulation Contractors Provider Name Locked
came out and explained the process and gave us what I thought was a very reasonable estimate. However, being a thorough person I contacted another company (larger with franchises) and recieved their estimate, it was substantially higher. For various reasons I put off the foam insulation project, I wish I hadn't because last winter was brutal.

So, after things settled down this summer, I contacted
Kings Mountain Insulation Contractors Provider Name Locked
again and soon became best friends with
Kings Mountain Insulation Contractors Provider Name Locked
the Office Manager. I had informed my immediate neighbors (who have the same type of home construction) that they could install foam insulation in their home for a reasonable price. Two of them were on-board immediately, (my next door neighbor called it a "no brainer" and said "sign me up") another one "came around" after
Kings Mountain Insulation Contractors Provider Name Locked
met him and explained the process. During this time
Kings Mountain Insulation Contractors Provider Name Locked
and I were talking quite frequently as she was coordinating the estimates and scheduleing the work and I was giving her people to contact that might be interested. As of today, FIVE houses on our street have been completed.
Kings Mountain Insulation Contractors Provider Name Locked
gave all of us a very attractive price because (twice) he was able to work on two houses at the same time (they were side by side).
The process: It was practically painless!
Kings Mountain Insulation Contractors Provider Name Locked
and his crew were great! They moved all of our porch furniture away from the house so they could work. You will have to take all pictures, mirrors down from any outside walls as the drilling might knock them off the wall. They drill holes in the exterior brick (in the mortar) and inject the foam, then they patch the holes so well you have a hard time finding where it was even injected. You will have to wash your windows after they are done because they spray water on the walls to wash off the excess foam. That's pretty much it. I stayed home to watch the process and it was cool. Inside the house you could hear the the foam as it was being injected. In the basement there were numerous places where the foam came through the interior block through cracks (That's a good thing), And the results?
For ten days after the foam insulation was installed, my house temperature stayed at 70 degrees,varying maybe a degree either way. With no heat turned on (we have hot water radiator heat) and our room air conditioners had been removed. The high and low temperatures during that time ( I checked) went from 80 degrees during the day to a low of 52 degrees. One day we left the window open on a nice day and we were gone most of the day. When we got home in the evening the house was 65 degrees and I thought I would have to light the furnace. We went to bed and the next morning the house was again 70 degrees. The resident heat in the house warmed the living space back to 70 degrees, I was ASTONISHED, and happy!!!
On October 4th we attended a wedding out of town, when we came home the temperature in the house had dropped to 60 degrees. Not a huge surprise as the overnight low was 39 degrees. So I finally had to light the furnace, and the house warmed up, and the furnace stopped running and IT STAYED OFF FOR A LONG TIME!!! Something that never happened before. Now when the furnace runs, it heats the house and shuts off. I don't even notice it running, partly because it doesn't run that often and also because the house is SO much quieter. The insulation dampened the outside noise considerably, (we live on a busy street). It's like a completely different house, it seems so much more solid and secure, it doesn't make sounds like it did before (nice additional benefits). My neighbors said the same thing. We can't believe the difference!!!
So the moral of the story is, if your house is cold and drafty and you are spending boatloads on heating your house. CALL
Kings Mountain Insulation Contractors Provider Name Locked
! THEY WILL TAKE CARE OF YOU!!!!
- James M.

All Insulation Contractors in Kings Mountain, NC

Companies below are listed in alphabetical order. To view top rated service providers along with reviews and ratings, Join Angie's List Now!

A+ Plus Contracting LLC

11733 East hampton
Charlotte

ACCU-DRY WATER/MOISTURE CONTROL

1221 N. Wendover Rd.
Charlotte

Advanced Home Remodeling, Inc

3617 Beulah Church Rd
Matthews

All About Energy Solutions

6821 Market St.
Wilmington

All American Maintenance

905 Honeywood Ln
Gastonia

American Energy Solutions South

P.O.Box 11055
Charlotte

American Home Shield

889 Ridge Lake Blvd

Americas Choice Contractors

1566 B Union Rd
Gastonia

ANDREW ROBY GENERAL CONTRACTOR INC

2000 West Morehead Street
Charlotte

Animal Agent CSI

PO Box 78015
Charlotte

Apex Energy Solutions Charlotte LLC

1515 Mockingbird Lane
Charlotte

Asa Stanford Inc

51 Hunting Creek Dr.
Waxhaw

Attic Tent

164 Mill Pond Ln
Mooresville

Aurora Building Group, Inc.

16607 Riverstone Way
Charlotte

Austin Company

3336 Highway 51
Fort Mill

Authentic Restoration

811 Pebblebrook Pl

Bairds Handyman Service

539 Kiser RD
Bessemer City

Baker Roofing Co

517 Mercury St
Raleigh

Ben Franklin Plumbing

8916 Crump Rd
Charlotte

Bender Custom Homes

8334 Pineville Matthews Rd
Charlotte

BioTek Environmental Inc

534 St Andrews Rd

Boxer Construction, L.L.C.

311 Chiswick Rd
Charlotte

BTR Construction & Roofing Co Inc

4336 Monroe Rd
Charlotte

Bug Busters USA

6975 Hwy 92

BVK Construction

5001 White Oak Rd.
Charlotte

Camden Roofing & Construction, LLC

221 E Kingston Ave
Charlotte

Carolina Crawlspace Solutions

4524 Rolling Hill Dr.
Charlotte

Carolina Home Remodeling

372 Cromptom St
Charlotte

Carolina Radon Mitigation

111 Shadyview Ln
Mooresville

Carolinas Home Pros

6135 Park South Dr
Charlotte

Cary Reconstruction Co LLC

2410 Reliance Ave
Apex

CBL Builders LLC

2515 Stanley Lucia Rd.
Mt. Holly

Charlotte Roofing Specialists

757 Providence Rd
Charlotte

Choice Home Improvements, Inc.

104 Oakland Ave.
Drexel

Chris Owens

5007 Highway 205
Marshville

Clean Air Carolinas Inc

PO Box 2247
Indian Trail

CLEAN AIR TECHNOLOGIES INC

1410 BABBAGE LN
Indian Trail

CLT Gutterglove

949 Coulwood Dr
Charlotte

COMFORT CONTROL

6150 Brookshire Blvd Ste H
Charlotte

Complete Construction Alternatives

1256 Waynewood Dr
Waxhaw

CONOVER CONSTRUCTION & ROOFING

1168 27TH STREET DR SE
Hickory

Crawl Space Doctor

24 Franklin Creek Rd. South

D & D DRYWALL & PAINTING

5316 Chinemist Ct
Charlotte

Energy One America

454 Jessen Ln

Energy Smart Homes

4607 Charlotte Prkwy.

Energy Tight LLC

4620 Rozzelles Ferry Rd
Charlotte

Energy Wise Solutions

4413 Lazy Dr.
Charlotte

Evans Home Improvement

117 Cornelius Rd
Mooresville

Exterior Touch Inc.

12610 Waverly RD.

Falcone Crawl Space & Structural Repair

1883 Scott Futrell Dr
Charlotte

FDC Construction

P.O Box 470888
Charlotte

Findlay Roofing Inc

4181 JVL Industrial Park Dr

Finishing Touches Construction

1528 Mount Isle Harbor Dr.
Charlotte

Five Oaks Roofing and Restoration, LLC

832 Dallas Bessemer Highway
Dallas

FOAM APPLICATORS INC

4122 WOODBEACH LN
Denver

Foam Insulators of NC

648 Tracey Ln
Gastonia

Fresh Air Technologies, LLC

2246 B Stevens Mills Rd
Matthews

GHC Professional Roofing

PO Box 2488
Cornelius

Green Planet Energy Solutions

9101 Southern Pine Blvd Ste 320
Charlotte

Grillo Stucco

417 Goldstaff Ln
Charlotte

GSM Heating and Air

407 E Long Ave
Gastonia

H2O Drying Solutions

6021 Kenley Ln
Charlotte

handy-man services

7109 Alexander Rd
Charlotte

Handy-Master

Charlotte

Hatley Home Improvements

1195 Cold Water Ext
Kannapolis

Hawkins Construction Company

206 Johnson Ave
Mount Airy

Healthy Home Insulation

2706 Arsdale Rd
Waxhaw

Holt Remodeling

107 First st.
Belmont

Home Spectors

2630 Shelburne Place
Charlotte

Huntersville Home Improvements

PO Box 1225
Huntersville

Integrity Heating & Cooling

11907 Sam Roper Drive
Charlotte

J & R Construction of North Carolina, LLC

3713 Fairlane Drive
Gastonia

J J'S CONSTRUCTION CO

1480 Rockwell Rd./PO Box 400
Rockwell

J&P Enterprises

4945 Wrenn Dr
Denver

Jenkins Restorations

1304 Industrial Drive
Matthews

JHP Enterprises

6010 Deep Green Dr
Shelby

JHP Enterprises

6010 Deep Green Dr
Shelby

Jiri - Carpentry

9113 Surrey Rd
Charlotte

Jose carpenter

128 Jeran Lane
Gastonia

Kaiser Siding And Roofing LLC

5400 Laurel Springs Pkwy

Kemp Roofing & Construction Inc.

631 Brawley School Rd., Suite 502
Mooresville

Kingsmen Home Repair

2712 Thomas Trail
Gastonia

Kola Exteriors - Charlotte

701 East Blvd
Charlotte

Lanier Roofing and Restoration

726 G Lowndes Hill Rd

Leslie's Roofing LLC

6220 Falcon Ln

Lowe's - Franklin Square

3250 E Franklin Blvd
Gastonia

Lundberg Specialty Services Inc

15720 John J Delaney Dr
Charlotte

mariosdrywallandpaint

8800 moores chapel rd

McKee Insulating Co Inc

4613 Statesville Rd
Charlotte

MCKINNON PAINT CONTRACTING PLUS!

3436 Teal Point Dr
Charlotte

Mid Carolina Home Solutions LLC.

4309 Weddington Rd.
Monroe

Moore's Custom Renovations

2480 Wellington Dr

Moore's Custom Renovations

2480 Wellington Dr
Gastonia

MWD Contracting Company

325 Neal Hawkins Rd
Gastonia

NC Energy Solutions

5622 Brickstone dr.
Charlotte

New South Remodelers

5810 Monroe Rd
Charlotte

Noosa Pest Management LLC

6916 Reacroft Drive
Charlotte

Ontrack Restoration and Construction Services, Inc

2400 Crownpoint Executive Dr
Charlotte

Patton General Contracting

2012 Highway 160 W

premier improvements

1564 brookbend ct

Pride Contractors

4516 Tom Starnes Rd
Waxhaw

Prime Energy Group

PO BOX 10156
Raleigh

Pro Energy Consultants

13306 Willow Breeze Lane
Huntersville

QUALITY INSULATING

821 W MARION ST
Shelby

R & R PAINTING & CONSTRUCTION CO

8401 BELSTEAD BROOK CT
Charlotte

R and S General Contracting

2509 Kempsar Ln
Monroe

Radiant Barrier of Charlotte,Inc.

9224 Garnet Field Ct
Charlotte

Rid-A-Bug Exterminating Co Inc

PO Box 83
Mooresville

Right Now Contractors Inc

2763 E Hwy 150
Lincolnton

Right On Construction

927 W. Hill St.
Oak Island

RK Restoration

7301 Tall Tree Ln
Charlotte

Roof Roof

5015 West W T Harris Blvd
Charlotte

Roofing Siding and Gutters LLC

5038 Harmon Rd
Kings Mountain

Room 2 Roof Restoration

100 North Tryon St
Charlotte

S&J Waterproofing

704 Barons Ridge Rd.
Kannapolis

Sealing Agents Waterproofing

PO Box 2370
Indian Trail

Second Look Inc

11534 Lemmond Acres Dr
Mint Hill

Secure Termite & Pest Control Inc

10809 Southern Loop Blvd
Pineville

SHS-Southern Home Services, LLC

4108 Park Road
Charlotte

sitlenterprisesllc

PO Box 2514
Matthews

SouthEnd Home Improvement

101 Freeland Drive
Charlotte

Southern Energy Management

101 Kitty Hawk Drive
Morrisville

Spray Man

133 Trappers Trail
Statesville

STANDARD INSULATING COMPANY

1005 N CHURCH ST
Charlotte

STEELE CREEK INC

10215 STEELE CREEK RD
Charlotte

Steve Earley Builders, Inc.

6243 S New Hope Rd
Belmont

STN Services

1105 Waxhaw Indian Trail Rd Ste 1
Indian Trail

Stonegate General & Electrical Contractors

117 S Wendover Trace Ave
Mooresville

StoneWright Home Services, LLC

546 Basswood Way
Gastonia

Storm Stopper Roofing

210 S Green St
Statesville

Sunshine Restoration Group

601 Circle Trace Rd
Monroe

Superior Exteriors

9716-B Rea Rd #135
Charlotte

Superior Roofs and Exteriors

13700 Anthea Lane
Huntersville

Sustainable Contractors

8611 Concord Mills Boulevard
Concord

T & J Handy Work

128 Jeran Ln
Gastonia

Talbot Exteriors

2324 Ridge Road
Monroe

Taylor Made for You LLC

2400 Rustic Pine Trl

Tentmakers Handyman

233 Catamount Drive

Terminix Pest Control

513 E Hebron St
Charlotte

Terry-Lynn LLC

1596 Jennings Road
Statesville

TR Contractors

Charlotte

TruTech Inc

PO Box 6849

TwoHandymanGuys.Com

16800 BRANDON BROOK
Charlotte

Urban Building Group

342 Circle Ave
Charlotte

URBAN RENEWAL DEVELOPMENT CO

2400 Crownpoint Executive Dr
Charlotte

Warmzone

12637 S 265 W Suite 100

Weather Pro Roofing & Insulation

5513 Monroe Rd
Charlotte

Woolf's Custom Carpentry

1045 Dooley Dr.
Charlotte

World Of Windows A Franchise of Window World Inc.

9100A Perimeter Woods Dr
Charlotte

ZIMALETA

9411 Willow Ridge Rd suit 1B
Charlotte

Shop Local Insulation Services in Kings Mountain, NC

Join Angie's List to get the best local reviews in Kings Mountain.

What Does My Membership Include?
  • Instant access to reviews for 700+ services
  • Exclusive service discounts - up to 70 percent off!
  • Top-notch support from our live call center
How does Angie's List work?
1. Say you need a Insulation Contractor
2. Angie's List has tons of detailed, local reviews.
3. Find a winner, and book them.
4. Angie's List is there to resolve any issues.
CBS
Good Morning America
Fox News
USA Today
The Wall Street Journal
MSN money