-Find top-rated Service Providers

Find Top-Rated Owings Mills Insulation Contractors

Angie's List helps you hire the best - and avoid the rest!

Insulation Contractors to Avoid

177

Top Rated Insulation Contractors

108

Prevent buyer's remorse with us

  • Over 3 million people trust Angie's List to help make the right choice
  • Be informed to avoid costly mistakes
  • Shop with us to ensure a fair price
  • Our complaint resolution team will help if a project goes bad
+See Verified Local Reviews

Over 23,144 reviews for
Owings Mills Insulation Contractors from people just like you.

A
"After a thorough inspection of the attic space
showed me pictures of what he found and explained what was recommended for each issue (there" was evidence of rodents in multiple places and old soiled worn insulation). There had also been a raccoon in my attic last Fall. On the day of service,
came with a work crew which included himself and 3 other workers. They carefully tapped plastic around the attic entry, protecting my floor and closet from any debris or contamination. At every step of the process
spoke with me and answered any questions I had. He showed me pictures to explain the work needed and the process. Air ducting found on inspection to be disconnected was repaired at no extra charge. After clean out of the attic, there was a careful inspection from both inside the attic and on the roof for any places were rodents could possibly enter - mesh and foam were put in an opened space in a wall between my attic and the attic of my neighbor, repair of torn mesh on roof vents was done for 1 place on my roof and 2 places on my neighbor's roof where a rodent could gain entry to my attic, and mesh was put on the outside of the plumbing caps (on my request even though mesh was already on the inside of the caps). Clean up of where a raccoon had been, which was hard to reach due to the construction of the attic and roof in one spot, was done as much as possible. At the end of the work the entire work area was nicely cleaned up. I found
to have high standards for quality work, worker protection, and customer satisfaction. My attic space is low and becomes even narrower at the edges. It was hard work to crawl to reach all corners and areas of my attic to do a thorough job, which was done. All workers wore protective clothing and gear. It was a hot day and each worker was allowed in the attic for up to 15 min. at a time - I noticed this when they were vacuuming out the debris, yet it may have been for all other processes as well. Both
and
were always professional, friendly and polite and went out of their way to make sure all of my questions and concerns were addressed. On completion of the work
helped me climb the ladder to view my clean, newly insulated attic.
was always available by phone or text before and after the work and he showed up on the day of work to assure everything was going smoothly. I will also be receiving before and after photos of each phase of the work.

-Kathleen G.

A
"They were extremely quick and efficient, cleaned up after themselves, and did a superb job. When I was gathering estimates for the job,
was" the most thorough by a long shot. He also pointed out some issues (and possible future issues) that I might have that were completely unrelated to the job at hand. I will absolutely be using them again for future work.

-Nicole H.

+Shop, Schedule, and Save on Services

Shop, Search and Save from anywhere!

  • Offers are exclusively provided by highly rated companies
  • Angie’s List members have access to exclusive discounts on local services
  • Shop, schedule, and stay on top of progress from any device
  • Our 30 Day Refund Guarantee means you can buy with confidence!
+Join 2 Million People on Angie's List

Over 2 million people trust Angie's List.

  • Your Membership Includes:
  • Instant access to top rated businesses covering 700+ services
  • Our Complaint Resolution Team to help when a project goes bad
  • On-the-go access to our iPhone, Android, & iPad apps
Find top-rated Service Providers
See Verified Local Reviews
Shop, Schedule, and Save on Services
Join 2 Million People on Angie's List

Local Articles in Owings Mills

Avoid ice dams with proper attic insulation

Do you have icicles forming on your eaves and gutters and ice collecting on your roof? An ice dam can cause serious problems without proper insulation.

While traditional fiberglass insulation is affordable and efficient, injection foam insulation can offer even more benefits. (Photo by Summer Galyan)
Insulation

Insulation isn't sexy, but it can keep you cool at night.

Better air quality, quieter living spaces, comfort and better health are all reasons to reconsider your insulation choices. (Photo courtesy of Angie's List member Roseanne J. of Seattle)
Insulation

Not just for new construction, learn how foam insulation can be placed inside existing walls to make your home more comfortable.

By properly insulating your attic you can keep warm air from escaping and save money on your energy bills. (Photo courtesy of Vinay S. of North Brunswick, New Jersey)
Insulation

Hot air rises … but good insulation can keep your energy costs from doing the same thing.

Even in cold-weather climates, homes often lack insulation between the finished, occupied portion of the home and the ground. (Photo courtesy of Angie's List member Paul B. of Bluffton, South Carolina)
Insulation, Energy Efficiency Auditing

Exterior foundation insulation is an often overlooked home improvement. It can help stop drafts, lower energy bills and keep your house warmer during winter.

Angie's Answers

?

If you go the Better Business Bureau website you can see that the company has only had two complaints in the last 18 months and that they have both been resolved.  The company has an A+ rating.  This is not something you can buy.

 

There are genuine reviews on many 3rd party online review sites including AngiesList and the Better Business Bureau.  Simply do a Google search for "Smart Energy Today Reviews".

 

Sol Blanket Insulation acts as a radiant barrier, insulation and a vapor barrier.  It is not intended to replace traditional insulation but in fact compliments it and adds to it's ability to keep cool/hot air (depending on the season) in the home when the envelope of the home is properly sealed.  

 

Every attic is different and there are many other components that must be considered.  You mentioned an attic fan as well.  The heat that is radiated away from the ceiling by the Sol-Blanket Insulation is pushed out of the attic with an attic fan.  The US Department of Energy states that radiant barriers do work and suggest they be installed by professionals.

 

As with any product by any company if the product is not installed properly and other factors (attic fan, caulking and sealing, etc...) are not addressed then it will not be as effective.

?

A couple of comments about what Jim said:

1) Regarding type of insulation, in cold winter environments: Cellulose and fiberglass are actually about comparable in R value when installed - blown in cellulose runs from 3.2-3.8 R value, fiberglass batt 2.9-4.3 R value depending on manufacturer and whether hig-density or low density, high-efficiency or standard, according to official Department of Energy publications. Measured values in attic test cases, in areas with a true winter, after 10 years showed a decrease from 3.4 (in the test case) down to 2.1 for cellulose, and 3.5 to 3.3 for fiberglass batt, due to packing or matting. In an attic environment, there WILL be condensation or frost on the insulation at some point during the year (assuming an area with true winters) and in highly insulated houses commonly for a substantial time period each winter. Fiberglass packs down slightly from that weight but mostly rebounds, cellulose packs down and mats and does not substantially recover, so over the years cellulose loses 1/3 to close to 1/2 its insulation value, fiberglass about 10%.

2) a note on radiation barriers attached to the bottom of the rafters - there are a lot of installers and homeowners making two major mistakes with this product that can cause major trouble: First, be sure to terminate it short of the eave openings. I have seen cases where it was carried all the way out to the fascia board, thereby blocking all airflow on the underside of the roof. Even carrying it all the way to the eaves along the bottom of the rafters will block off ventilation to the main attic area. You have to leave the air space between the rafters open to full airflow from the soffit/eave area ot the ridge vent. Second, do NOT run it continuous from eave to eave across the full width of the attic - leave a gap about a foot wide under the ridge vents so warm and moist air in the attic can vent through the ridge vent. Closing the ridge vent area off with the radiant barrier effectively puts a vapor barrier around the main attic area, causing retention of the moisture which WILL accumulate there, promoting mold.

?

Obviously this is not a timely response to the initial question. However, for those who may be reading these answers at a later time, a couple of added thoughts:

1) the radiant barrier being discussed is basically heavy-duty metal foil or metallized surface on a plastic sheet, intended to reflect RADIATED heat (infrared radiation - think heat light, or heat you can feel at a distance radiated from a fireplace), the same way a mirror reflects light. Radiated heat is how a standard oven broils and how steam and hot water baseboard heat predominately work.

2) you generally should do NOT place a radiant barrier over the insulation that lies between and over the joists in a normal attic, especially in a region where the attic temperature can frequently reach condensation temperature (below about 45-50 degrees) - it may reflect back some of the house heat that is coming up from the house, but by destroying most of the temperature gradient from the house to the attic air destroys much of the driving force that moves moisture to the attic air and subsequent venting. Between that greater heat and the fact the barrier is also a moisture barrier, that makes a perfect condition for mold and rot in your insulation and attic wood, and has become quite an issue in energy upgraded homes because of retrofits that cut off airflow outside the insulation, but do not cut off the moisture source leaking thorough from the house. The proper and ONLY place for a vapor barrier in a normal attic insulation system is on the pressurized and normal warm, humid side of the insulation zone - directly above the ceiling drywall in the top floor, fastened to the UNDERSIDE of the ceiling joists or trusses, NOT anywhere above that. Perforated barriers are supposed to reduce this tendency, but the perforation area percentage is so small that typically they still act as a vapor varrier, just not a totally effective one.

3) radiant barriers reflect radiated heat ewith up to 99% efficiency but have basically zero resistance to CONDUCTION (body to body heat transfer at points of contact - think heat transfer from your warm hand to a frozen cold drink can, or hot pavement heat transfer to the bottom of your feet) - so there needs to be an air gap between the radiant barrier and the hot item passing the heat to it, otherwise the heat will just pass through it by conduction. Therefore, applying it directly to the sheathing (above or below) or manufacturing it directly on the surface of the sheathing defeats its purpose, even though this is commonly done.

4) there is a lot of discussion, particularly in the professional design community, about attic radiant heat barrier effectiveness and problems. Because they are being installed on the bottom of the sheathing or underside of roof joists, they act as a heat trap for the energy being conducted through the roof which would normally radiate into the attic air or be transferred by CONVECTION (fluid flow heat transfer) to the attic air, and be vented through roof vents, ridge vents, gable vents, etc. By trapping that heat, they are causing the underside of the shingles and particularly the felt and sheathing to get a lot hotter than they otherside would, essentially changing it from a system where the shingle top surface might reach 120-180 F and the inside surface of the sheathing about 80-140F in the summer, to making the entire roof system equal to the outside surface temperature. This causes more rapid shingle deterioration and cracking, and makes the felt or plastic moisture barrier under the shingles brittle and subject to failure.

Also, any moisture above the radiant barrier (from roof leaks or humid air coming into the area) is prevented from evaporating by the attic airflow which would normally remove it, so it starts acting like a steamer. I have seen both wood and metal lofts and attics become a major mold farm in months because of this effect, and a couple of roofs which started sagging due to rotted sheathing within 2 years of reroofing with tightly adhered radiant barrier. Some radiant barriers are vapor-permeable to reduce the moisture issue, many are not, but few actually are effective in letting moisture freely escape.

Having seen these products in use, and having analyzed and specified building products for use from the Middle East to the Arctic for decades, and having a Masters in Arctic Engineering (a degree predominately in energy conservation and heat flow), my personal opinion is that these radiant barriers will be banned by code within 10-15 years for unheated (so-called "cold" roofs) roofs, because they just do not use the principles of thermodynamics correctly. For more info on this issue Google the following search phrase  - moisture trapping by radiant attic barriers       and read the government (not the manufacturer) literature on the issue.

5) Unfortunately, the right way to handle this issue is to put the radiant surface on the OUTSIDE of the house - by using reflective materials on the roofing material. This is already done with flat roofs, house trailers, and industrial structures by spraying with alumiunum paint, and a few brands offer reflective aggregate shingles that are slightly more reflective and radiant than normal shingles. People obviously do not like this reflective surface from an aesthetic standpoint, though with solar cells coming into more general use this may soon be more widely adopted. The idea should be to keep the solar energy from penetrating into the building envelope at all, not try to re-reflect it away after it has penetrated throguh the roof system.

The sprayed-in foam has a couple of issues you need to be aware of:

6) it needs to be the low-pressure expanding type mixed for use around window frames, as fully expanding foam can bow joists or trusses and pop drywall ceilings free as it expands, and non-expanding foam actually shrinks as it cures, leaving gaps for air and heat flow alongside the ceiling joists.

7) being closed-cell it is essentially impervious to moisture, so the vapor barrier on the house side has to be EXCELLENT (incuding sealingof all penetrations), or it will trap household moisture escaping into the attic and promote mold and rot in the ceiling drywall and joists.

8) it tends to bleed chemical fumes into the house for a long period of time (can be noticeable for years), which may be objectionable to some people from an odor or environmental standpoint, and especially should be considered if any residents have severe allergy issues or respiratory problems.

9) I emphatically recommend AGAINST use of sprayed-in foam between ceiling joists or truss members in any area that can have cold attic air that could cause moisture condensation in the insulation, though this is probably not a significant problem where you live, assuming your Dallas is the city in Texas. For essentially year-around air-conditioned homes in hot climates, the problem can actually be condensation of attic air moisture on and in the colder ceiling surface insulation and on cold attic runs of air conditioned air, so attic ventilation becomes a critical issue to remove the moisture before it condenses.

In summary, having seen an awful lot of attic moisture and thermal problems, my personal recommendation would be to ensure excellent sealing of the house from the attic, use normal UNFACED fiberglass insulation, and instead of a radiant barrier ensure adequate full-attic ventilation. If you decide to got with a radiant barrier, then I would recommend a perforated one, sloping up towards the sides a foot or two and stopping a foot or so clear at the sides so moist air under it can escape to the roof joist spaces and be vented from the attic. I have seen this done several times with a fine nylon net strung above the insulation in the attic, supporting the barrier, resulting in something very similar to the double-roof system used in bedouin tents, where airflow between the two layers keep the hot air away from the living space.

?
Steve made a good point.  Also, while it isn't required to remove the old insulation you can check the ductwork, wiring, etc. with the old stuff removed,  You can also spray foam around all openings and holes in wall top plates to better seal your home as Steve was pointing out.  My concern is the potential for mold spores you mentioned in your question.  If you suspect there are any get a good company in to remove the old and clean the attic.  Another concern is asbestos.  Your home is old enough you could have it in there and that's worse than mold if released into the air.

Todd Shell
Todd's Home Services
?

A moisture barrier has to be on the warm side ie towards the heated side.  Most people would not install a moisture barrier in your situation.  (They also sell a paint that you can use on your interior ceiling? as a moisture barrier).  Rather most homeowners would hire an insulation contractor to blow a cap over the existing insulation bringing it up to your areas reccomended levels,,Your power company can tell you the level, I would guess R 40.  What you use is up to your wallet, the best is a spray foam that can be applied to the ceiling or over the whole shebang.  Being a bit of a miser I would trot on down to my local big box store and buy a truckload of cellulose and get a free blower for I and a friend to self insulte.  Big box= Menards, Lowes etc.  Cellulose= ground up paper treated with boron for insect control and fireproofing.  It has a high R value and will stop moving air loss from the home. Before you cap current mostly emply attic is ideal time to take sealant to any openings in the attic floor,  like pocket doors, canister lights electircal wires and close off the air leaks from inside.  If foaming skip this.  Hot air rises so you save yourself a ton air sealing the home.

An attic radiant barrier is also a possiblity see my blog for nifty results on it.

Jim Casper Old Energy Conservation Guru

ps moving existing insulation use a plastic rake

?

Have you checked Angie’s List? Angie’s List Answers is a great place to find advice from professionals, but for ratings, reviews and information to help you hire the companies you need, visit www.angieslist.com today.

 

 

Insulation reviews in Owings Mills

D

Rating
The tech got halfway through and had to stop due to hot weather. I was never able to get them back to finish the job. There was a coupon of $150 for 1,000 sq ft and I think my roof is about 2,500 sq ft. They didn't ask me to pay more than $150, so I paid $150 for radiant
Owings Mills Insulation Contractors Provider Name Locked
for half of my roof and will need to do the rest at some point. I will be calling someone else though.
- Ryan H.
B

Rating
They used a blower-door and thermal imaging system to identify areas of potential energy loss. He was very thorough and highly informative. Waiting for a response to my request for an itemized list of conservation measures and associated cost / energy savings.
- Mitch T.
B

Rating
The first install did not go well. Due to a spray gun system that had seen it's last days, there was excessive effervescence from the spray which ended up everywhere in the house. Also due to this issue, the mix of the SPF created a very strong
Owings Mills Insulation Contractors Provider Name Locked
that took weeks to clear out of the house, and I think accentuated the under spraying of the foam. The crew that took the old insulation out did ok but also created their own mess. While the crew offered to continue working on the clean up, after a couple of days I was ready for the crew to be gone.

Monitoring the performance of the SPF install (monitoring temperature of the attic vs temperature of the interior), as well as frequency of the AC running, I knew that something was wrong as the performance was not meeting expectations.

Consulting with a friend how has been in the business for over 20 years in another state, he suggested I measure the thickness of the foam on the underside of the roof. Sure enough, it had not been installed to the contracted (and required) thickness of 5.5". It was anywhere from 2 to 3 inches. So vs. R-19+, my attic now had around R-11.

The good news, and the reason why they still got relatively high ratings, is they were very responsive to this problem and set up a time to come out and they completely resprayed the attic (no additional charge).

They were using a new spray guns system the second time and the effervescence AND the smell were negligiable, which leads me to believe the first install issues were due to defective equipment.

I would still recommend
Owings Mills Insulation Contractors Provider Name Locked
, and would encourage anyone to have this method of home energy efficiency improvements to be done.

Many times the quality of a company is how they address problems and when something goes wrong. With
Owings Mills Insulation Contractors Provider Name Locked
, they were excellent in this area and were committed to getting it right.

There are a lot of fly by night companies that are trying to get into this growly popular business that do not know what they are doing so buyer beward and do your research. My advice for anyone doing this SPF process, do a walk through inspection with any contractor is done, have a piece of wire marked in inches to measure the install depth, and do your own quality control.

Owings Mills Insulation Contractors Provider Name Locked
is not one of those companies and as they do know what they are doing and by experience stands behind their work.
- Michael C.
A

Rating
Very professional. Two guys showed up on time. Got the job done quickly and efficiently. Cleaned up after finishing the job. Would definitely hire again.
- Susan S.
A

Rating
The first person arrived around 8:30am and they were done around 12:00 noon. The job went faster than I expected and the crew was very friendly and courteous. They did an outstanding job of putting plastic up to keep the insulation in the attic instead of on our floors. And every scrap that happened to escape was cleaned up before they left. Overall, I was extremely pleased with the service.
The company does charge $75 for quotes (the fee is waived if you follow through with the installation). I don't like this, but it seems to be an industry norm.
Owings Mills Insulation Contractors Provider Name Locked
did give me some general idea of how to calculate an estimate before he came, so I had a good idea of what to expect. This was the 3rd quote I had asked for from a company. The first company, the owner popped his head in the attic for just a minute (but then never sent me a quote). The second company was Lowe's, and their estimator refused to even look in the attic. When
Owings Mills Insulation Contractors Provider Name Locked
arrived, he went straight to the attic and crawled from one end to the other before giving me his quote. I really liked that he gives a turn-key proposal and there is zero concern about having "surprises" being added to the bill after the job is in progress. He also suggested other improvements that would allow the project to meet
Owings Mills Insulation Contractors Provider Name Locked
Progress's rebate program. (Note:
Owings Mills Insulation Contractors Provider Name Locked
is not the same as
Owings Mills Insulation Contractors Provider Name Locked
Progress and this often causes confusion.
Owings Mills Insulation Contractors Provider Name Locked
is pre-approved with both utilities.)
Owings Mills Insulation Contractors Provider Name Locked
is the quintessential small business owner. He is friendly, hands-on, and easy to deal with. One of the drawbacks of a small business is that when you call the main number you will have to sometimes leave a message and you have to work around their availability. However, their great customer service, good pricing, and outstanding work make dealing with this company a pleasure. They'll be my first call when we're ready for the next phase of insulating this old house.
- David B.
A

Rating
Bathroom plumbing was exposed to cold air in the poorly-insulated attic and pipes had frozen several times. After a hefty plumbing repair, the attic space was "cocooned" with foam. It must have been in the teens or 20s that day, and minutes after the foam was applied, the attic space was warm.
It went smoothly. I only wish I had these guys come in the first winter we lived in this house and had problems with freezing pipes (this was our second winter). We previously had a healthy population of insects in the basement, but almost none since the band joists were foamed.
I did a lot of research and foam is the way to go and I highly recommend K & C!
- John R.
C

Rating
The owner left me a nasty voicemail when I didn't pick up my phone while at work and then said that he thought it was another
Owings Mills Insulation Contractors Provider Name Locked
that had called. He gave me a quote around $8,000 but when his guys showed up, they said that most of the stuff that he had quoted, I already had like such as soffits and vents.
- Cindy L.
A

Rating
Owings Mills Insulation Contractors Provider Name Locked
was wonderful. He came out and inspected out attic. Explained to us that we didn't have enough insulation in some areas and that our attic floor had cracks that was letting heat and air escape into the attic which was very evident.
Owings Mills Insulation Contractors Provider Name Locked
was schedule to come out on a Monday when he arrived to pick up his truck to do the job it had a flat tire. He knew that I had an appoint that afternoon and was on a time crunch so he called me to explain that he could come but was concerned that it may run into my appt time. He asked if I wanted to change his installed to Wednesday so he could do a
Owings Mills Insulation Contractors Provider Name Locked
job, which I had no problem.
Owings Mills Insulation Contractors Provider Name Locked
and Stefon called 30 minutes prior to arriving show me and explained as they worked. He was also going to blow insulation under my bedroom floor thru in the garage ceiling but after he cut and hole determine if it was needed. He discover it was not needed and patched hole. I could asked for a better job. They cleaned up after themselves very nice people.
- Kimberly A H.

Insulation Contractors in Owings Mills, MD

Companies below are listed in alphabetical order. To view top rated service providers along with reviews and ratings, Join Angie's List Now!

84 LUMBER CO

1704 HARFORD RD
Bel Air

A & F Construction Services

3 Clear Skys
Baltimore

A & J Home Remodeling

3212 South 13th Rd

A CLOSER LOOK HOME INSPECTION

1458 ALLEN WAY
Westminster

A-1 ROOFING SERVICES /KANGAROOF

6360 S Hanover Road
Elkridge

A-Z Home Enhancements, Inc.

503 Cedarwood Ct
Bel Air

Advanced Green Home Solutions

285 Pinewood Road
Millersville

AES BUILDER & HOME IMPROVEMENTS

6915 GOLDEN RING RD
Rosedale

All Aspects Waterproofing

8735 Bollman Pl
Savage

All done

412 chestnut ct
Dundalk

ALL TYPES CAULKING

561 Green St.
Havre De Grace

Allied Remodeling Corporation

1212 E Joppa Rd
Towson

Allmaster Builders Inc

7609 Energy Pky
Curtis Bay

America's Best Energy Team

14140 Parke Long Ct

AMERICAN CONSTRUCTION SERVICES

10602 Guilford Road
Jessup

American Design and Build

221 Gateway Dr
Bel Air

American Home Performance LLC

2512 Windy Oak Court
Crofton

American Home Shield

889 Ridge Lake Blvd

American Home Specialists

13221 Mockingbird ln
Bowie

American Mold & Restoration

3540 Crain Hwy
Bowie

AMS Home Remodeling LLC

6755 Greatnews Ln
Columbia

Artisan Construction Inc

1610 S Shore Pkwy
Pasadena

Atlantic Acquisitions, LLC

53 Odeon Ct
Parkville

Atlantic Duct Cleaning

22875 Bryant Ct, Suite 120

BADGER CONTRACTING INC

9505 Reisterstown Road 2N
Owings Mills

Baltimore Siding & Window Co

2682 Ideal Court
Manchester

Banner Home Solutions

3915 Boteler Rd
Mount Airy

Bel Air Construction

1654 Robin Cir
Forest Hill

Bellanca Handyman Services

755 Melville Ave
Baltimore

Best Value Property Solutions Inc

15900 Sherwood Ave
Laurel

BGE Home

1409 Tangier Dr
Middle River

BILT-RITE CONTRACTORS INC

1833 York Rd
Lutherville Timonium

Blair Construction LLC

301 Najoles Rd
Millersville

Blue Dot Services - 8554

125 Industry Ln
Forest Hill

Boxer Construction LLC

612 Highland Av
Towson

Brothers Services Co

111 Hanover Pike
Hampstead

Brucksch and Sons Contracting, LLC

1617 Kimber Rd
Glen Burnie

Budget Bath

2160 East Joppa
Baltimore

C & K Home Improvement

52 Ridge Ave.
Edgewater

C & R Insulation LLC

1290 Bay Dale Dr
Arnold

C N M Installations Inc

3535 Honey Suckle Ln
Middle River

C.W. Gotsch Home Improvements, Inc.

12254 Bonmot Pl
Reisterstown

Caliber Home Restoration

100 Oak Drive
Catonsville

Capital Insulation Svcs of MD

502 McCormick Drive Suite D
Glen Burnie

Catonsville Contractors

106 South Morerick Ave
Catonsville

Certified Home Remodelers Inc

300 Cabernet Dr
Westminster

Certified Inc

13509 Paternal Gift Drive
Highland

Charm City Remodeling

278 Beckworth Ct
Severna Park

Chesapeake Window & Remodeling Inc

3133 Acton Rd
Parkville

CHEVY CHASE REMODELING

7722 Whiterim Ter
Potomac

Clarksville Construction Services

9050 Red Branch Rd
Columbia

CMS Urethane Sytems Inc

239 Fell Rd
Rising Sun

Coastal Custom Wine Cellars

2405 Orchard Crest Blvd

Complete Kitchens & More

459 Baltimore Blvd
Westminister

CONTINENTAL HOME INSULATORS

361 GATEWATER CT
Glen Burnie

CONTINUUM ENERGY SOLUTIONS

5645 General Washington Dr

Custom Carpentry Plus

9815 Ritchie Ct
Frederick

Custom Concepts Construction

19532 Club House Road
Montgomery Village

Custom Construction of Carroll County LLC

4470 Bartholow Rd
Sykesville

Cyber Bridge Marine, Inc.

209 S. Stephanie St

Dan Nichols Contractor

5777 White Rock Road
Sykesville

DEVERE INSULATION HOME PERFORMANCE

508 McCormick Dr. Suite H
Glen Burnie

Dimitri's Home Improvement Inc

929 Stormont Cir
Halethorpe

DIRZUWEIT & SONS BUILDERS INC

1646 WHITEFORD RD
Darlington

DJ's Construction

2321 Manchester Rd
Westminster

Dorsey Contractors Inc.

13090 Old Frederick Rd
Sykesville

Dr Energy Saver

889 Airport Park Rd
Glen Burnie

DREAM IT/ BUILD IT INC

12 SPINNAKER REEF CT
Middle River

DSE Carpentry

271 A Arundel Beach Rd
Severna Park

Duct Masters Rx

423 Deacon Brook Cir
Reisterstown

DUCTZ of the Upper Bay Region

2501 Derby Drive
Fallston

Dunne Wright Services Llc

1412 Crain Hwy N
Glen Burnie

East Coast Custom Construction LLC

3383 yellow SPGS. S
Laurel

EC Roofing and Home Services Direct

837 Frederick Road
Catonsville

EcoMize USA

18 Dickens Sq
Lutherville Timonium

Edge Energy

6854 Distribution Dr
Beltsville

Edram General Construction LLC

109 Lauren Ct
Frederick

Efficient Home

3905 National Dr
Burtonsville

Elysian Energy LLC

1414 Fenwick Ln
Silver Spring

EMA Contracting, LLC

213 N. Union Ave.
Havre De Grace

EMB HOMES LLC

PO BOX 25707
Baltimore

Ener G LLC

3900 Briars Rd
Olney

ENERGY EFFICIENCY EXPERTS

1800 East West Highway
Silver Spring

Energy Savers

8911 Mistletoe Dr
Easton

Energy Services Group

8009 Jumpers Hole Rd
Pasadena

Envyro Technologies LLC

1588 Jarrettsville Rd
Jarrettsville

Ernest Maier, Inc.

4700 ANNAPOLIS RD
Bladensburg

Exin Solutions Inc

8515 Blounts Ln
Fulton

Exterior Touch Inc.

12610 Waverly RD.

Eye See Improvement

4605 Old Court Rd
Pikesville

Fichtner Services Inc

PO Box 115
Odenton

Fick Bros Roofing Co

1200 E 25th St
Baltimore

Five Star Quality Remodeling

Catonsville
Catonsville

Foam InSEALators

7501 Resource Ct
Baltimore

FORSYTH CONSTRUCTION LLC

2900 Andrea Ave.
Parkville

Fox First Construction

1744 Carry Pl
Crofton

FR Contractors & Investors, inc.

1905 Bond Road
Parkton

FREE SPIRITED CONTRACTOR

7 W GEORGE ST
Westminster

G & H INSULATION INC

11424 CRONHILL DR
Owings Mills

Gambrills Home Improvements

2470 Wintergreen Wy
Gambrills

Gem Construction Co Inc

2013 Longview Ave
Rosedale

General Home Improvement LLC

1806 Virginia ST
Annapolis

Gottpower Services Inc.

8372 Lockwood Rd.
Pasadena

GREENBUILDERS INC

4033 OSBORN RD
Reisterstown

Greene Home Services, LLC

13208 Ardennes Ave
Rockville

Greentech LLC

101 Chestnut St
Gaithersburg

GreenWorks Systems

9124 Belair Rd.

GSmulti-services

12 National Dr
Essex

Gutterglove of Maryland

14625 Baltimore Ave
Laurel

Handyman At Your Command- Baltimore

8480 Baltimore National Pike
Ellicott City

Handyman on Call LLC

218 Main St
Reisterstown

Handyman Services Unlimited, Llc.

855 BIRCHWOOD CT
Arnold

Harbor & Waterford Corp.

6012 Harford Road
Baltimore

Harbor Kitchen Design

6012 Harford Rd
Baltimore

Harford Insulation

7501 Resource Ct
Baltimore

High Performance Home LLC

3711 Roop Rd
New Windsor

HIGHLIGHT CONSTRUCTION CO.,INC

4130 HOME DALE RD
Sykesville

Home Contractors Plus

8402 Quill Point Dr
Bowie

Home Energy HERO LLC

PO Box 121
Clarksville

Home Energy Loss Professionals (HELP)

7329 Holabird Avenue
Baltimore

Home Energy Rescue

8160 Maple Lawn Blvd
Fulton

Home Energy Saving Solutions

5268G Nicholson Ln
Kensington

Home Pro Roofing & Remodeling LLC

2144 Priest Bridge Ct
Crofton

HomeFinishers

Northeast
Baltimore

Homefix Custom Remodeling

1506 Joh Ave
Baltimore

Honey Do Handyman Service

948 Ships Bell Ct
Annapolis

Horizon Unlimited Home Improvements Inc

7387 Washington Blvd
Elkridge

Householder Contractor Services LLC

415 Valley Meadow Cir
Reisterstown

IMPROVEMENT ZONE LLC

St Johns Drive
Annapolis

Innovative Elements Inc

1510 Suite H Caton Center Drive
Halethorpe

INTEGRITY HOME REMODELING SERVICES

108 PLEASANT HILL RD
Owings Mills

Ivy League Construction LLC

6414 Deer Park Rd
Reisterstown

James L Graves Construction

750 Route 3 South
Gambrills

James McDonald Roofing

14625 Baltimore Ave
Laurel

JCabido Remodeling

15605 Bradford Dr
Laurel

Jenkins Builders LLC

8680 Magnolia Ave
Perry Hall

JES Foundation Repair

1741 Corporate Landing Parkway

Jiffy Plumbing & Heating, Inc.

4623 BALTIMORE AVE
Hyattsville

JJM Home Improvements Inc

8185 Ritchie Hwy
Pasadena

JLI Services Inc.

13318 Keating Street
Rockville

John M Riley and associates construction

3036 Churchville Rd
Churchville

JVS General Contractor LLC

milford mill rd
Baltimore

K&R RoofMasters

151 Schooner Ln #30
Prince Frederick

Kargmans Inc

10429 Reisterstown Rd
Owings Mills

Kat Construction Services, LLC

2108 Emmorton Park Rd
Edgewood

Kephart Construction

800 Vantage Point dr
Sykesville

Kevin's Handyman Services LLC

420 Spaulding Ct
Westminster

KNK Construction, LLC

P.O. Box 327
Abingdon

Kotlar Custom Home Improvements, LLC

8736 Silver Hall Rd.
Perry Hall

L&V Quality Contractor LLC.

2419 Yarmouth lane

LAFLEUR ASSOCIATES

7386 HOPKINS WAY
Clarksville

Leafguard of Maryland & N Virginia

7000 Virginia Manor Road
Beltsville

Leon Builders LLC

2750 North Rosedale Street
Baltimore

Leska Restoration LLC

4330 Linthicum Rd
Dayton

Leverage Contractors Inc

7424 Prince George Rd
Pikesville

M B NICHOLS CONTRACTING

1650 CROFTON BLVD SUITE # 16
Crofton

M Squared Construction Corp.

P.O. Box 1494
Ellicott City

M&M Commercial Contractors

325 Wise Avenue
Dundalk

M2000 DEVELOPMENT CORPORATION

4208 FERNHILL AVE
Baltimore

MAGGIO CONSTRUCTION CO

PO Box 1210
Millersville

Marvin's General Contractors Inc

316 Duxbury Rd
Silver Spring

Maryland Home Improvement Co

6 Delrey Ave
Catonsville

Maryland Installation Services LLC

7611 Mellor Ave
Sykesville

Mastoras & Nikolaou Construction

622 South Newkirk Street
Baltimore

Matthew's Construction Company Inc

7410 SCHOOL AVE
Dundalk

McCabe's Home Improvements

1909 TYLER RD
Dundalk

MDB Carpet & Restoration Services

2223 Anapolios Rd
Baltimore

Melchior

852 W 35th St
Baltimore

Mercury Home Remodeling

8 Missi Ct
Owings Mills

metropolis

10400 Eaton Pl Ste 203

MEYERS CONSTRUCTION CO

1121 GREENWOOD RD
Pikesville

MH Construction, Inc

PO Box 124
Linthicum Heights

Miller's Chimney & Hearth Retailer

111 John St
Westminster

Misha's Home Improvement Inc

1257 Baltimore Annapolis Blvd
Arnold

MJ Home Services LLC

4367 Hollins Ferry Rd
Baltimore

Modern Remodeling Inc

10550 Associates Ct

MoldGone LLC

2508 Locustwood Pl
Silver Spring

Moreland Contracting Inc

748 Ticonderoga Ave
Severna Park

Mr Basement

832 Oregon Ave
Linthicum Heights

Nowicki Construction

PO Box 934
Severna Park

NuLife LLC Home Improvements and Services

7804 Birmingham Avenue
Nottingham

Old Time Contractors Inc

211 Adam Smith Street
Sykesville

Orbe Construction

19114 Old Baltimore Rd
Brookeville

Owings Brothers Contractors

1912 Liberty Rd
Sykesville

Park Heights Roofing

6999 Reisterstown Rd Suite 1
Baltimore

Paul Davis Restoration of Greater Baltimore

10715 Red Run Boulevard
Owings Mills

Perryhall Remodeling

Jarrettsville

PG Builders Inc

7805 Old Georgetown Rd
Bethesda

PLS Custom Homes & Renovations

261 Burrisville Rd
Centreville

Post & Beam Design Build

14346 Jarrettsville Pike #400
Phoenix

Premier HomePro

37 Maryland Ave
Rockville

Premier Window & Building Inc

9515 Reisterstown Rd
Owings Mills

Premo Ind. Welding & Fabrication

10004 Pulaski Hwy Suite C

PROENERGY CONSULTANTS

39 HEMISON CT
Pikesville

Property Restoration Services, LLC

501 W Main St
Emmitsburg

Pyramid Insulation Inc

1100 Batavia Farm Rd
Rosedale

Quality Home Solutions, llc

7672 2nd Street
Pasadena

Quality Insulation

229 Windridge Acres Ct
Silver Spring

R. Hudson & Sons

5605 Waterloo Rd
Ellicott City

Referred By Renovators Inc

1494 Governor Bridge Rd
Davidsonville

Reliability Home

2819 N Point Blvd
Baltimore

Remodel USA

605 Hampton Park Blvd
Capitol Heights

Rick Braida Design|Build

2222 E. Fairmount Ave
Baltimore

Rocky's Roofing & Siding Inc

1108 Hoods Mill Rd
Woodbine

RON DUCOTE CONSTRUCTION

2733 LAWNDALE RD
Finksburg

Roof Right Inc

1621 Hanover Pike
Hampstead

Roy P. Mitchell Home Improvements

1003 Langley Rd.
Glen Burnie

Rule4 Building Group

7081 Dorsey Run Rd
Elkridge

Ryan Construction Co

8920 Avenue B
Sparrows Point

S&K Roofing, Siding, and Windows

5399 Enterprise St
Sykesville

Santos Contracting, LLC

301 Coldbrook Rd
Lutherville Timonium

Savon Contracting

111 Church Rd.
Owings Mills

SED Home Services, LLC.

PO Box 482
Phoenix

Sheldon & Sons Inc

3220 Hunting Tweed Dr.
Owings Mills

Singh Construction

206 Back River Neck Rd
Essex

Smart Home Services

15 W. Aylesbury Rd.
Lutherville Timonium

Smith & Sons Contracting Co Inc

8131 Solley Rd
Pasadena

Soundrite-Acoustics, Inc.

209 S. Stephanie Street

Standard Energy Solutions

1355 Piccard Dr
Rockville

Stephen Lewis Barrett Contracting

12763 Liberty Rd
Union Bridge

Stonestreet Contracting

5518 N Annapolis Dr
Mount Airy

Superior Design & Restoration

8902 Cowenton Rd
Perry Hall

Surewood builders, llc

4267 Arthur shipleyroad
Westminster

TC Drywall LLC

468 Hammerstone Dr
Westminster

Terminix - Owings Mills

10715F Red Run Blvd
Owings Mills

The Baltimore Handyman Company

90 Painters Mill Road
Owings Mills

The Handy-Man

5600 Overlook court
White Marsh

The Home Wise Pros

327 E Ridgeville Blvd
Mount Airy

The Master's Finish Inc.

4108 Larson Ln
Mount Airy

The Village Carpenter

PO Box 285
Monkton

Thomas Roofing Company Inc

4353 Arters Mill Rd
Westminster

Thornton Home Improvement Inc

5850 Waterloo Rd Ste 140
Columbia

Timothy's Home Improvement

1591 Bentley Cir.
Bel Air

TONY LABATA ASSOCIATES

232 N. CAREY ST, SUITE 1
Baltimore

Top Notch Contracting

3979 Hawks Hill Rd.
New Windsor

Trappro

2125 Baldwin Ave
Crofton

Triangle Home Services Inc

3197 Atlee Ridge Rd
New Windsor

Unique Enterprises Inc

5841 Shookstown Rd
Frederick

Universal Maintenance

65173 Seventh Road

USA Energy

800 Rosedale Avenue
Rosedale

USA Insulation

7554 Rickenbacker Dr
Gaithersburg

USI Carroll Insulation

49 Venture Way
Sykesville

Warmzone

12637 S 265 W Suite 100

Weathermaster Custom Windows

2115 Eastern Avenue
Baltimore

Western Cary Building Products

2129 Pulaski Hwy
Havre De Grace

Western Pest Services

1850 York Rd
Timonium

Wheaton Door & Window Company

5640 Sunnyside Ave
Beltsville

WINCHESTER REMODELING

700 William Street
Baltimore

Windows on Washington

23465 Rock Haven Way

WS CONTRACTORS INC

4953 BRISTLE CONE CIR
Aberdeen

Your Handy Man & More LLC

33 Norwick Cir
Lutherville Timonium

Your Remodeling Guys

3679 Concord Rd

Zero handyman Services

4346 Shamrock Ave
Baltimore

Zerodraft Maryland

113 West Rd
Towson

Zowd Homes & Restoration Inc

9236 Whisky Bottom Rd
Laurel

Shop Local Insulation Services in Owings Mills, MD

Join Angie's List to get the best local reviews in Owings Mills.

What Does My Membership Include?
  • Instant access to reviews for 700+ services
  • Exclusive service discounts - up to 70 percent off!
  • Top-notch support from our live call center
How does Angie's List work?
1. Say you need a Insulation Contractor
2. Angie's List has tons of detailed, local reviews.
3. Find a winner, and book them.
4. Angie's List is there to resolve any issues.
CBS
Good Morning America
Fox News
USA Today
The Wall Street Journal
MSN money