-Find top-rated Service Providers

Find Top-Rated Millersville Insulation Contractors

Angie's List helps you hire the best - and avoid the rest!

Insulation Contractors to Avoid


Top Rated Insulation Contractors


Prevent buyer's remorse with us

  • Over 3 million people trust Angie's List to help make the right choice
  • Be informed to avoid costly mistakes
  • Shop with us to ensure a fair price
  • Our complaint resolution team will help if a project goes bad
+See Verified Local Reviews

Over 19,004 reviews for
Millersville Insulation Contractors from people just like you.

"SUMMARY: We’ve remodeled four houses and hired 30+ contractors and have never had such a negative experience with a contractor/company. Nick
" the president of AIS did not do what we hired him to do which was to make a room useable. He also did not honor the warranty/guarantee he promised us when we interviewed him. We are out a lot of money and he has abandoned the job. Nick also did not use all the materials he charged us for in our contract. We found out later than the materials he used are not even up to code. The final let-down was at our final meeting where he told us that he pay’s his customer’s $10 to write a good review on Angie’s List. He told us if we agreed to take down our original bad review we wrote he would give us a check for $10. I use Angie’s List because of the faith I put in the reviews. When I found out he was paying for them I was shocked. DETAILS OF WHAT HAPPENED: We hired AIS to insulate a bonus room on the top floor of our home, during the interview process we discussed with Nick many times what we should expect. We also sent emails asking questions about whether we should do this. Nick emphatically said yes and that he could make the room comfortable. He told us to expect a 12-15 degree difference in the room. He said he did rooms like ours all time and this would be a standard job for him. He also said he guaranteed his work. We hired him because of these promises and his reviews on Angie’s List. Nick did the job on June 11, 2015. There was no temperature change whatsoever. The temperature in the room the day after he did the work was 94 degrees. All summer the temperature in the room remained in the 90s. Nick came back 5-6 times to fix his work, many were things we pointed out were wrong. For example, air was coming through ceiling lights that should have been fixed the first time, there was a one inch gap between a storage door and the floor that was like an open window letting heat in, etc. Every time he came he said these things should have been fixed when the job was first done. Although we were frustrated by his mistakes we didn’t want Nick to abandon the job so we remained patient and didn’t let him know how frustrated we were by his mistakes. One of the things that really concerned us was that in his invoice he charged us for eight electrical covers for the recessed lights. He told me after I paid him that he used electrical tape instead of covers. We found out that over time this can be a fire hazard We discussed with Nick for two months that the room was still warm. He told us every time that he was completely baffled by this and that he was talking to insulation experts about the problem but that he wouldn’t give up. We trusted he would do that but on August 4th he abruptly told us the problem was our HVAC unit and no longer his responsibility. After explaining why we didn’t think this was possible because the room is served by eight registers that operate at full air flow (Nick himself has confirmed there are no leaks in the ductwork.) Nick accused us of not considering the HVAC unit as a problem. So we did our own research on the unit. We contacted a Trane contractor who told us given the age and size of the unit it is more than capable of cooling the room. Especially if the room is properly insulated to the standards Nick says it is. Our Trane contact also said that given that the room below this room is at a comfortable 77 degrees during the summer there should not be an 18 degree discrepancy. This can only be due to a poor insulation job. After we confirmed this could not be the problem Nick decided to take a different approach to justify his work. He said that he had in fact made a 10-15degree temperature difference from the year before and since we didn’t have temperature records from the summer before we couldn’t prove this wasn’t true. This shocked us. When I told him I had used the room the previous summer and there’s no way I would have sat in a room that was 110-115 degrees he just smiled and stated that I couldn’t prove what the temperature was and therefore he wasn’t liable. When Nick was still trying to fix his work, he told us time and time again that he didn’t understand why there were problems because everything was done to industry standards but every time he came out it was to fix something he had done wrong before or should have done the first time. We think there is something that was done incorrectly when he did the initial install but we can’t prove it because we aren’t insulation experts. At one point Nick said if I could show him pictures of what he did wrong he would honor his guarantee. That is unfair. How can we review his work? Nick told us several times that this room was the biggest challenge he's encountered. That may be but we hired him as the 'expert'. Nick also said on several occasions that our satisfaction was very important to him. We thought that meant he would find a solution rather than try really hard but abandon the job if it didn’t work out. We are stuck with a hot room that we've paid AIS a great deal to fix. The final insult is that after two Angie’s List employees called Nick and explained to him the benefits of resolving this Nick contacted us and said he wanted to meet. I told him this was something we wanted to resolve via email given that my husband works far from our house and I work too. He insisted we meet at the house and said that he wanted to resolve this and the meeting would end with him paying us a check. My husband and I took time off work to meet with him. After talking to him for an hour Nick kept trying to get us to say we were satisfied with the work he did, not the results but with what he did. We told him we couldn’t say that because he made a lot of mistakes that he admitted to during the job. What was his final offer? $10 to remove the original bad review we wrote on Angie’s List. He went on to say he offers every customer $10 if they write a good review on Angie’s List. We immediately told Nick the meeting was over and he told us, ‘excellent’. In the end we think he enjoyed wasting our time. Completely disappointing experience. <br clear="all">


"This was the easiest time I've had getting a new roof because of a hail storm. In 1998 I got a new roof and again in 2008. It took over 6 months those first" two times to finally get the roof re-roofed and for the insurance company to pay their end.
had me done in less than 60 days. All of the minor repairs were completed also. I took advantage of the warranties he offered also. The crew was awesome. We had a huge bee hive on the back of our house that they took care of at no extra charge. We didn't find any nails or debris in our yard. I kept
's card because I can tell he will still be doing this no matter how long it takes me to need a new roof again. He does it right. I will definitely be using him again in the future and I would recommend him to anyone.

-Matt W.

+Shop, Schedule, and Save on Services

Shop, Search and Save from anywhere!

  • Offers are exclusively provided by highly rated companies
  • Angie’s List members have access to exclusive discounts on local services
  • Shop, schedule, and stay on top of progress from any device
  • Our 30 Day Refund Guarantee means you can buy with confidence!
+Join 2 Million People on Angie's List

Over 2 million people trust Angie's List.

  • Your Membership Includes:
  • Instant access to top rated businesses covering 700+ services
  • Our Complaint Resolution Team to help when a project goes bad
  • On-the-go access to our iPhone, Android, & iPad apps
Find top-rated Service Providers
See Verified Local Reviews
Shop, Schedule, and Save on Services
Join 2 Million People on Angie's List

Local Articles in Millersville

Avoid Ice Dams With Proper Attic Insulation

An ice dam can cause serious problems to your roof without proper insulation.

By properly insulating your attic you can keep warm air from escaping and save money on your energy bills. (Photo courtesy of Vinay S. of North Brunswick, New Jersey)

Hot air rises … but good insulation can keep your energy costs from doing the same thing.

Better air quality, quieter living spaces, comfort and better health are all reasons to reconsider your insulation choices. (Photo courtesy of Angie&#039;s List member Roseanne J. of Seattle)

Not just for new construction, learn how foam insulation can be placed inside existing walls to make your home more comfortable.

While traditional fiberglass insulation is affordable and efficient, injection foam insulation can offer even more benefits. (Photo by Summer Galyan)

Insulation isn't sexy, but it can keep you cool at night.

Angie&#039;s List
Appraisals - Real Estate, Architects & Building Design, Basement Waterproofing, Bathtub Refinishing & Liners, Biohazard Remediation, Builders - Garages/Barns/Sheds, Builders - Homes, Cabinet Making, Cabinet Refacing/Restoration, Carpentry - Unfinished, Carpentry - Woodworking, Carpet Sales/Installation/Repair, Chimney Caps, Chimney Repair, Chimney Sweep, Closets, Concrete - Leveling/Mudjacking, Concrete - Pouring & Repair, Concrete - Stamped & Decorative, Countertops, Deck Maintenance, Decks & Porches, Delivery Service, Dock Building & Repair, Doors, Drywall, Dumpster Service, Electrical, Epoxy Flooring, Excavating, Fireplaces, Floor Cleaning/Polishing/Waxing, Flooring Sales/Installation/Repair, Foundation Repair, Fountains, Garage Doors, Glass & Mirrors, Glass Block, Gutter Cleaning, Gutter Repair & Replacement, Handymen, Hardwood Flooring Sales/Installation/Refinishing, Hauling, Heating & A/C, Home Automation, Hurricane Shutters, Insulation, Land Surveying, Landscaping, Landscaping - Hardscaping & Pavers, Landscaping - Lakefront, Landscaping & Lighting, Lawn & Yard Work, Lawn Fertilization & Treatment, Lawn Irrigation, Lead Testing & Removal, Marble & Granite, Masonry, Mold Testing & Remediation, Moving, Painting - Exterior, Painting - Interior, Pest Control/Exterminating, Plumbing, Plumbing - Drain Cleaning, Pressure Washing, Radon Detection & Reduction, Remodeling - Basements, Remodeling - General, Remodeling - Kitchen & Bathroom, Remodeling - Modular & Mobile Home, Remodeling - Sunrooms & Patio Enclosures, Roof Cleaning, Roof Ice/Snow Removal, Roofing, Screen Repair, Septic Tank, Sewer Cleaning, Siding, Skylights, Stone & Gravel, Structural Engineering, Stucco, Tree Service, TV Service - Cable, TV Service - Satellite, Wallpaper Removal, Wallpapering, Window Cleaning, Window Tinting, Window Treatments, Windows, Windows - Egress, Windows - Safety & Security Film, Wrought Iron

Contractors say homeowners with this trait are the most satisfied with home improvement projects.

Angie's Answers


If you go the Better Business Bureau website you can see that the company has only had two complaints in the last 18 months and that they have both been resolved.  The company has an A+ rating.  This is not something you can buy.


There are genuine reviews on many 3rd party online review sites including AngiesList and the Better Business Bureau.  Simply do a Google search for "Smart Energy Today Reviews".


Sol Blanket Insulation acts as a radiant barrier, insulation and a vapor barrier.  It is not intended to replace traditional insulation but in fact compliments it and adds to it's ability to keep cool/hot air (depending on the season) in the home when the envelope of the home is properly sealed.  


Every attic is different and there are many other components that must be considered.  You mentioned an attic fan as well.  The heat that is radiated away from the ceiling by the Sol-Blanket Insulation is pushed out of the attic with an attic fan.  The US Department of Energy states that radiant barriers do work and suggest they be installed by professionals.


As with any product by any company if the product is not installed properly and other factors (attic fan, caulking and sealing, etc...) are not addressed then it will not be as effective.


A couple of comments about what Jim said:

1) Regarding type of insulation, in cold winter environments: Cellulose and fiberglass are actually about comparable in R value when installed - blown in cellulose runs from 3.2-3.8 R value, fiberglass batt 2.9-4.3 R value depending on manufacturer and whether hig-density or low density, high-efficiency or standard, according to official Department of Energy publications. Measured values in attic test cases, in areas with a true winter, after 10 years showed a decrease from 3.4 (in the test case) down to 2.1 for cellulose, and 3.5 to 3.3 for fiberglass batt, due to packing or matting. In an attic environment, there WILL be condensation or frost on the insulation at some point during the year (assuming an area with true winters) and in highly insulated houses commonly for a substantial time period each winter. Fiberglass packs down slightly from that weight but mostly rebounds, cellulose packs down and mats and does not substantially recover, so over the years cellulose loses 1/3 to close to 1/2 its insulation value, fiberglass about 10%.

2) a note on radiation barriers attached to the bottom of the rafters - there are a lot of installers and homeowners making two major mistakes with this product that can cause major trouble: First, be sure to terminate it short of the eave openings. I have seen cases where it was carried all the way out to the fascia board, thereby blocking all airflow on the underside of the roof. Even carrying it all the way to the eaves along the bottom of the rafters will block off ventilation to the main attic area. You have to leave the air space between the rafters open to full airflow from the soffit/eave area ot the ridge vent. Second, do NOT run it continuous from eave to eave across the full width of the attic - leave a gap about a foot wide under the ridge vents so warm and moist air in the attic can vent through the ridge vent. Closing the ridge vent area off with the radiant barrier effectively puts a vapor barrier around the main attic area, causing retention of the moisture which WILL accumulate there, promoting mold.


Obviously this is not a timely response to the initial question. However, for those who may be reading these answers at a later time, a couple of added thoughts:

1) the radiant barrier being discussed is basically heavy-duty metal foil or metallized surface on a plastic sheet, intended to reflect RADIATED heat (infrared radiation - think heat light, or heat you can feel at a distance radiated from a fireplace), the same way a mirror reflects light. Radiated heat is how a standard oven broils and how steam and hot water baseboard heat predominately work.

2) you generally should do NOT place a radiant barrier over the insulation that lies between and over the joists in a normal attic, especially in a region where the attic temperature can frequently reach condensation temperature (below about 45-50 degrees) - it may reflect back some of the house heat that is coming up from the house, but by destroying most of the temperature gradient from the house to the attic air destroys much of the driving force that moves moisture to the attic air and subsequent venting. Between that greater heat and the fact the barrier is also a moisture barrier, that makes a perfect condition for mold and rot in your insulation and attic wood, and has become quite an issue in energy upgraded homes because of retrofits that cut off airflow outside the insulation, but do not cut off the moisture source leaking thorough from the house. The proper and ONLY place for a vapor barrier in a normal attic insulation system is on the pressurized and normal warm, humid side of the insulation zone - directly above the ceiling drywall in the top floor, fastened to the UNDERSIDE of the ceiling joists or trusses, NOT anywhere above that. Perforated barriers are supposed to reduce this tendency, but the perforation area percentage is so small that typically they still act as a vapor varrier, just not a totally effective one.

3) radiant barriers reflect radiated heat ewith up to 99% efficiency but have basically zero resistance to CONDUCTION (body to body heat transfer at points of contact - think heat transfer from your warm hand to a frozen cold drink can, or hot pavement heat transfer to the bottom of your feet) - so there needs to be an air gap between the radiant barrier and the hot item passing the heat to it, otherwise the heat will just pass through it by conduction. Therefore, applying it directly to the sheathing (above or below) or manufacturing it directly on the surface of the sheathing defeats its purpose, even though this is commonly done.

4) there is a lot of discussion, particularly in the professional design community, about attic radiant heat barrier effectiveness and problems. Because they are being installed on the bottom of the sheathing or underside of roof joists, they act as a heat trap for the energy being conducted through the roof which would normally radiate into the attic air or be transferred by CONVECTION (fluid flow heat transfer) to the attic air, and be vented through roof vents, ridge vents, gable vents, etc. By trapping that heat, they are causing the underside of the shingles and particularly the felt and sheathing to get a lot hotter than they otherside would, essentially changing it from a system where the shingle top surface might reach 120-180 F and the inside surface of the sheathing about 80-140F in the summer, to making the entire roof system equal to the outside surface temperature. This causes more rapid shingle deterioration and cracking, and makes the felt or plastic moisture barrier under the shingles brittle and subject to failure.

Also, any moisture above the radiant barrier (from roof leaks or humid air coming into the area) is prevented from evaporating by the attic airflow which would normally remove it, so it starts acting like a steamer. I have seen both wood and metal lofts and attics become a major mold farm in months because of this effect, and a couple of roofs which started sagging due to rotted sheathing within 2 years of reroofing with tightly adhered radiant barrier. Some radiant barriers are vapor-permeable to reduce the moisture issue, many are not, but few actually are effective in letting moisture freely escape.

Having seen these products in use, and having analyzed and specified building products for use from the Middle East to the Arctic for decades, and having a Masters in Arctic Engineering (a degree predominately in energy conservation and heat flow), my personal opinion is that these radiant barriers will be banned by code within 10-15 years for unheated (so-called "cold" roofs) roofs, because they just do not use the principles of thermodynamics correctly. For more info on this issue Google the following search phrase  - moisture trapping by radiant attic barriers       and read the government (not the manufacturer) literature on the issue.

5) Unfortunately, the right way to handle this issue is to put the radiant surface on the OUTSIDE of the house - by using reflective materials on the roofing material. This is already done with flat roofs, house trailers, and industrial structures by spraying with alumiunum paint, and a few brands offer reflective aggregate shingles that are slightly more reflective and radiant than normal shingles. People obviously do not like this reflective surface from an aesthetic standpoint, though with solar cells coming into more general use this may soon be more widely adopted. The idea should be to keep the solar energy from penetrating into the building envelope at all, not try to re-reflect it away after it has penetrated throguh the roof system.

The sprayed-in foam has a couple of issues you need to be aware of:

6) it needs to be the low-pressure expanding type mixed for use around window frames, as fully expanding foam can bow joists or trusses and pop drywall ceilings free as it expands, and non-expanding foam actually shrinks as it cures, leaving gaps for air and heat flow alongside the ceiling joists.

7) being closed-cell it is essentially impervious to moisture, so the vapor barrier on the house side has to be EXCELLENT (incuding sealingof all penetrations), or it will trap household moisture escaping into the attic and promote mold and rot in the ceiling drywall and joists.

8) it tends to bleed chemical fumes into the house for a long period of time (can be noticeable for years), which may be objectionable to some people from an odor or environmental standpoint, and especially should be considered if any residents have severe allergy issues or respiratory problems.

9) I emphatically recommend AGAINST use of sprayed-in foam between ceiling joists or truss members in any area that can have cold attic air that could cause moisture condensation in the insulation, though this is probably not a significant problem where you live, assuming your Dallas is the city in Texas. For essentially year-around air-conditioned homes in hot climates, the problem can actually be condensation of attic air moisture on and in the colder ceiling surface insulation and on cold attic runs of air conditioned air, so attic ventilation becomes a critical issue to remove the moisture before it condenses.

In summary, having seen an awful lot of attic moisture and thermal problems, my personal recommendation would be to ensure excellent sealing of the house from the attic, use normal UNFACED fiberglass insulation, and instead of a radiant barrier ensure adequate full-attic ventilation. If you decide to got with a radiant barrier, then I would recommend a perforated one, sloping up towards the sides a foot or two and stopping a foot or so clear at the sides so moist air under it can escape to the roof joist spaces and be vented from the attic. I have seen this done several times with a fine nylon net strung above the insulation in the attic, supporting the barrier, resulting in something very similar to the double-roof system used in bedouin tents, where airflow between the two layers keep the hot air away from the living space.

Steve made a good point.  Also, while it isn't required to remove the old insulation you can check the ductwork, wiring, etc. with the old stuff removed,  You can also spray foam around all openings and holes in wall top plates to better seal your home as Steve was pointing out.  My concern is the potential for mold spores you mentioned in your question.  If you suspect there are any get a good company in to remove the old and clean the attic.  Another concern is asbestos.  Your home is old enough you could have it in there and that's worse than mold if released into the air.

Todd Shell
Todd's Home Services

A moisture barrier has to be on the warm side ie towards the heated side.  Most people would not install a moisture barrier in your situation.  (They also sell a paint that you can use on your interior ceiling? as a moisture barrier).  Rather most homeowners would hire an insulation contractor to blow a cap over the existing insulation bringing it up to your areas reccomended levels,,Your power company can tell you the level, I would guess R 40.  What you use is up to your wallet, the best is a spray foam that can be applied to the ceiling or over the whole shebang.  Being a bit of a miser I would trot on down to my local big box store and buy a truckload of cellulose and get a free blower for I and a friend to self insulte.  Big box= Menards, Lowes etc.  Cellulose= ground up paper treated with boron for insect control and fireproofing.  It has a high R value and will stop moving air loss from the home. Before you cap current mostly emply attic is ideal time to take sealant to any openings in the attic floor,  like pocket doors, canister lights electircal wires and close off the air leaks from inside.  If foaming skip this.  Hot air rises so you save yourself a ton air sealing the home.

An attic radiant barrier is also a possiblity see my blog for nifty results on it.

Jim Casper Old Energy Conservation Guru

ps moving existing insulation use a plastic rake


Have you checked Angie’s List? Angie’s List Answers is a great place to find advice from professionals, but for ratings, reviews and information to help you hire the companies you need, visit www.angieslist.com today.



Insulation reviews in Millersville


Forrest gave a very competitive price and also assisted with all rebate paperwork. Crew showed up on time and finished job quickly. Some areas were a little low in coverage, but overall fine. For the price, I thought it was well worth it and the energy savings in the summer is very noticeable.
- Jacob D.

4 guys arrived early AM. Worked hard all day. Took a few breaks but needed them. I was quite happy with their work.
- Merrill S.

Three employees showed up. Each one shook my hand and introduced themselves. Extremely efficient, neat and hard working. Extremely professional. Company owner was on site for duration of work.
- Kvin H.

Everything was quick and easy.
Millersville Insulation Contractors Provider Name Locked
called ahead to confirm appointment, and they were prompt. They were very personable and easy to work with. They worked quickly and efficiently. Everything that was moved out of the way to access the attic and equipment was put back before they left. Great value for the money!
- Karen F.

This was a great deal! I recently bought an older home, with a secondary house on the same lot. Both of these units were not insulated and I expected to have to pay a great deal of money to get this done. The Deal offered here was for 1000 sq feet, and
Millersville Insulation Contractors Provider Name Locked
was able to let me allocate my unused square footage towards the back house, and provided the remaining square footage need to complete the back house at a reduced rate. His team arrived the next day and they were courteous and mindful of my pets' needing to be kept penned and the doors kept closed (I just moved in and was nervous the animals might try to bolt with strangers in the house).
After the work was done I saw no evidence of any stray material or debris left behind. The work itself was very quiet (I had imagined it would be a really noisy process). And, they were really quick too!
Millersville Insulation Contractors Provider Name Locked
called me today to check on my satisfaction...when does that ever happen??!! I was pleased to tell him that my house was freezing cold this morning!!!
- Mike S.

I had several contractors come to the house to give me an estimate. They wanted to replace ALL of my crawlspace insulation with estimates above $2200.00 and quite frankly they seemed a little sketchy. They wanted a 50% deposit immediately and I felt a little uncomfortable handing over $1000 plus dollars to someone that I couldn't even research on the web.
I contacted
Millersville Insulation Contractors Provider Name Locked
because they had been in business for over 50 years as a family owned and operated company.
Millersville Insulation Contractors Provider Name Locked
came out to the house within 2 days and was promptly here when he said he would be. He did a thorough inspection of my crawlspace and said that I needed some repairs, but not all of the insulation was bad. He wanted to reattach some of the old insulation and replace the insulation that was actually bad. I also wanted to replace my contractor grade vapor
Millersville Insulation Contractors Provider Name Locked
. His estimate was less than $800 and he used an upgraded 10 mil vapor
Millersville Insulation Contractors Provider Name Locked
(it happens to be white in color and really spruced up the appearance of the crawlspace as well). His three man crew showed up when promised and immediately went to work. It was a very hot day and my crawlspace is very low, so this was a very difficult job to say the least. The young men were very respectful and hard workers. They were the type of guys that you could give full access to your house and you would have no worries at all.
I would not hesitate to recommend
Millersville Insulation Contractors Provider Name Locked
and I would certainly use them again.

I highly recommend
Millersville Insulation Contractors Provider Name Locked
. After dealing with a number of small contractors over the years to do various odd jobs, it was like a breath of fresh air from start to finish with these guys. They earned my trust and confidence each in each step of the process.
1. When I called they actually answered the phone. (As dumb as that sounds, I found many do not and several don't even bother calling back,)
Millersville Insulation Contractors Provider Name Locked
, the owner, spoke with me himself and was extremely professional, guided me through the process and the pricing upfront. He answered all my questions fully and made me feel quite confident that I had made the right decision calling his company. (Most others that I spoke with either seemed bothered that I had called or came across as sleazy con-men, and none gave up front pricing.)
3. The
Millersville Insulation Contractors Provider Name Locked
arrived on time and was ready to begin work right away. (I can tell you horror stories about other contractors who could not even do this
Millersville Insulation Contractors Provider Name Locked
4. The
Millersville Insulation Contractors Provider Name Locked
was polite. Yes POLITE!!!
5. The
Millersville Insulation Contractors Provider Name Locked
had all the correct tools. (My lending toolbox stayed in the
Millersville Insulation Contractors Provider Name Locked
of the car.)
6. The
Millersville Insulation Contractors Provider Name Locked
confirmed the scope of the work, inspected the work area, confirmed the estimated time and once again made sure that I was aware of the pricing up front.
Millersville Insulation Contractors Provider Name Locked
knew what to do and did it effectively and efficiently. It was really fun just watching him knock it out, almost like it was choreographed. They say that pros make it look easy, this guy made it look dead
Millersville Insulation Contractors Provider Name Locked
. (I know from personal experience it was not easy at all when you have a steep roof, that's why I hired them in the first place, that and I am getting old.)
8. He would have cleaned up at the end but I stopped him as he had done quite enough on such a hot day and because I figured that I could do the cleaning myself.)
9. When he completed the work he thanked me for the opportunity to work on my project and said that he would be happy to assist me in any future projects.
10. The company sent me my receipt by email and thanked me for my business.
Honest, friendly, polite, professional, experienced, knowledgeable, trustworthy, hard working, and not over priced. Yup! I recommend them.

- Christian W.

They have a minimum fee of $475 for all jobs. My job was not quite $475 so I had to pay the minimum. This is archaic but I paid it so obviously, I am feeding the monster.
The crew arrived almost an hour late, despite knowing their work preceded a window installation project and would impact the other contractor. Stuff happens - they said they got stuck in traffic. This is Columbus, OH, not New
Millersville Insulation Contractors Provider Name Locked
City. I am amazed when, often, contractors arrive late and blame it on traffic. I go to work everyday, and I arrive on time because I plan for .... traffic. While attempting to pull their large box truck up to the
Millersville Insulation Contractors Provider Name Locked
in front of my house, the crew shaved off a large branch of my neighbor's tree. I had to yell for them to stop or the damage would have been a lot worse. Ultimately, they had to ask the window installers to move their truck from that spot - after asking ME to negotiate with that crew, for them.
Thankfully, the window installers, who had already begun, agreed to move their truck, then stepped aside and waited for the insulation to be installed. At one point, a supervisor showed up on site and did not introduce himself to me. I had to ask him, as he wandered around my patio, if I could help him, and who was he? He eventually gave me his name but seemed disinterested in communicating with anyone other than his crew. Nice attempt at quality control but a bit of a blunder on customer service.
After the insulation was in, the crew got ready to leave, without cleaning up the mess they made while drilling holes in my cedar and blowing insulation into the walls. I asked, "Do you guys clean this up?", they replied, "Not usually." So I asked them to do so today. They then had to ask the window installers to borrow their shop vac to remove the debris strewn all over my porch. When it came time to pay the bill, they doubled the price. I laughed and said, "Nice try." Additional unfunny comments followed to which I did not reply.
Overall, work seemed fine. Not the most comforting experience with a contractor I've had this summer.

Insulation Contractors in Millersville, MD

Companies below are listed in alphabetical order. To view top rated service providers along with reviews and ratings, Join Angie's List Now!


Bel Air

A & F Construction Services

3 Clear Skys

A & J Home Remodeling

3212 South 13th Rd



A-1 Roofing's Kanga Roof

6360 S Hanover Rd

A-Z Home Enhancements, Inc.

503 Cedarwood Ct
Bel Air

Advanced Green Home Solutions

285 Pinewood Road



All Aspects Waterproofing

8735 Bollman Pl

All done

412 chestnut ct

Allied Remodeling Corporation

1212 E Joppa Rd


10602 Guilford Road

American Home Performance LLC

2512 Windy Oak Court

American Home Shield

889 Ridge Lake Blvd

American Home Specialists

13221 Mockingbird ln

American Mold & Restoration

3540 Crain Hwy

Area Roofing & Siding Company

5800 Woodcliff Rd

Atlantic Acquisitions, LLC

53 Odeon Ct


9505 Reisterstown Road 2N
Owings Mills

Baltimore Siding & Window Co

2682 Ideal Court

Basement Masters

1680 E Gude Dr

Bellanca Handyman Services

755 Melville Ave

BGE Home

1409 Tangier Dr
Middle River


1833 York Rd
Lutherville Timonium

Blair Construction LLC

301 Najoles Rd

Blue Dot Services - 8554

125 Industry Ln
Forest Hill

Bob Grill General Contractor Inc

9817 Lanham Severn Rd


3907 Conifer Lane

Bowen Remodeling and Design

2146 Priest Bridge Ct Ste 2

Boxer Construction LLC

612 Highland Av

Brucksch and Sons Contracting, LLC

1617 Kimber Rd
Glen Burnie

C & R Insulation LLC

1290 Bay Dale Dr

C N M Installations Inc

3535 Honey Suckle Ln
Middle River

Caliber Home Restoration

100 Oak Drive

Caperones Contracting

1334 Swan Dr

Capital Insulation Svcs of MD

502 McCormick Drive Suite D
Glen Burnie

Catonsville Contractors

106 South Morerick Ave



Certified Home Remodelers Inc

300 Cabernet Dr

Certified Inc

13509 Paternal Gift Drive

Charm City Remodeling

278 Beckworth Ct
Severna Park

Chesapeake Window & Remodeling Inc

3133 Acton Rd


7722 Whiterim Ter

Clarksville Construction Services

9050 Red Branch Rd

Complete Home Solutions LLC

235 W Bay Front Rd


5645 General Washington Dr

Cooper's Construction

P.O. Box 4221

Custom Carpentry Plus

9815 Ritchie Ct

Dan Nichols Contractor

5777 White Rock Road


508 McCormick Dr. Suite H
Glen Burnie



DJ's Construction

2321 Manchester Rd

Dorsey Contractors Inc.

13090 Old Frederick Rd

Dr Energy Saver

889 Airport Park Rd
Glen Burnie


Middle River

DSE Carpentry

271 A Arundel Beach Rd
Severna Park

DUCTZ of the Upper Bay Region

2501 Derby Drive

Dunne Wright Services Llc

1412 Crain Hwy N
Glen Burnie

East Coast Custom Construction LLC

3383 yellow SPGS. S

EC Roofing and Home Services Direct

837 Frederick Road

EcoMize USA

18 Dickens Sq
Lutherville Timonium

EMA Contracting, LLC

213 N. Union Ave.
Havre De Grace


PO BOX 25707

Emmanuel Woodworks LLC

616 broach Ct

Envyro Technologies LLC

1588 Jarrettsville Rd

Ernest Maier, Inc.


Exin Solutions Inc

8515 Blounts Ln

Eye See Improvement

4605 Old Court Rd

Fichtner Services Inc

PO Box 115


2900 Andrea Ave.

Fox First Construction

1744 Carry Pl

Gambrills Home Improvements

2470 Wintergreen Wy

Gede Insulation

2129 Pulaski Hwy
Havre De Grace

Gem Construction Co Inc

2013 Longview Ave

General Home Improvement LLC

1806 Virginia ST

Gottpower Services Inc.

8372 Lockwood Rd.


27943 Oaklands Circle



Greentech LLC

101 Chestnut St

GreenWorks Systems

9124 Belair Rd.


12 National Dr

Gutterglove of Maryland

14625 Baltimore Ave

Handyman At Your Command- Baltimore

8480 Baltimore National Pike
Ellicott City

Handyman on Call LLC

218 Main St

Handyman Services Unlimited, Llc.


Harbor & Waterford Corp.

6012 Harford Road

Harbor Kitchen Design

6012 Harford Rd

Harford Insulation

7501 Resource Ct



Hollenczer Construction Inc

201 Oakwood Ln

Home Contractors Plus

8402 Quill Point Dr

Home Energy Loss Professionals (HELP)

7329 Holabird Avenue

Home Pro Roofing & Remodeling LLC

2144 Priest Bridge Ct

Homefix Custom Remodeling

1506 Joh Ave

Honey Do Handyman Service

948 Ships Bell Ct

Horizon Unlimited Home Improvements Inc

7387 Washington Blvd

Householder Contractor Services LLC

415 Valley Meadow Cir


St Johns Drive

Infrared Tools Energy Services

2147 Priest Bridge Dr Ste 9

Innovative Elements Inc

1510 Suite H Caton Center Drive

Insulators Home Exteriors

15430 D Old Columbia Pike


Owings Mills

Ivy League Construction LLC

6414 Deer Park Rd

J.S. Remodeling

1726 Waldorf Ct

James L Graves Construction

750 Route 3 South

James McDonald Roofing

14625 Baltimore Ave

Jiffy Plumbing & Heating, Inc.


JLB BuildersLLC

206 Arundel Beach Rd
Severna Park

JLI Services Inc.

13318 Keating Street

JVS General Contractor LLC

milford mill rd

K&R RoofMasters

151 Schooner Ln #30
Prince Frederick

Kargmans Inc

10429 Reisterstown Rd
Owings Mills

Kat Construction Services, LLC

2108 Emmorton Park Rd

Kevin's Handyman Services LLC

420 Spaulding Ct

KNK Construction, LLC

P.O. Box 327

L&V Quality Contractor LLC.

2419 Yarmouth lane





Leon Builders LLC

2750 North Rosedale Street

Leverage Contractors Inc

7424 Prince George Rd

M Squared Construction Corp.

P.O. Box 1494
Ellicott City

M&M Commercial Contractors

325 Wise Avenue




PO Box 1210

Marvin's General Contractors Inc

316 Duxbury Rd
Silver Spring

Maryland Home Improvement Co

6 Delrey Ave

Mastoras & Nikolaou Construction

622 South Newkirk Street

McCabe's Home Improvements


MDB Carpet & Restoration Services

2223 Anapolios Rd


852 W 35th St

Mercury Home Remodeling

8 Missi Ct
Owings Mills


10400 Eaton Pl Ste 203



MH Construction, Inc

PO Box 124
Linthicum Heights

Misha's Home Improvement Inc

1257 Baltimore Annapolis Blvd

MJ Home Services LLC

4367 Hollins Ferry Rd

MoldGone LLC

2508 Locustwood Pl
Silver Spring

Moreland Contracting Inc

748 Ticonderoga Ave
Severna Park

Mr Basement

832 Oregon Ave
Linthicum Heights

Mr. Handyman of Anne Arundel & NE PG

8424 Veterans Hwy

Nowicki Construction

PO Box 934
Severna Park

NuLife LLC Home Improvements and Services

7804 Birmingham Avenue

Old Time Contractors Inc

211 Adam Smith Street

Owings Brothers Contractors

1912 Liberty Rd

Pinnacle improvements

8072 Woodholme Cir

PLS Custom Homes & Renovations

261 Burrisville Rd

Post & Beam Design/Build

14346 Jarrettsville Pike #400

Premier Window & Building Inc

9515 Reisterstown Rd
Owings Mills

Premo Ind. Welding & Fabrication

10004 Pulaski Hwy Suite C



Property Restoration Services, LLC

501 W Main St

Quality Home Solutions, llc

7672 2nd Street

Quality Insulation

229 Windridge Acres Ct
Silver Spring

R. Hudson & Sons

5605 Waterloo Rd
Ellicott City


423 Deacon Brook Cir

Referred By Renovators Inc

1494 Governor Bridge Rd

Regional Property Group

PO Box 270

Reliability Home

2819 N Point Blvd

Remodel USA

605 Hampton Park Blvd
Capitol Heights

Rick Braida Design|Build

2222 E. Fairmount Ave

Robinson's Handyman/Home Improvement

778 Harmony Avenue

Rocky's Roofing & Siding Inc

1108 Hoods Mill Rd

Roof Right Inc

1621 Hanover Pike

Roy P. Mitchell Home Improvements

1003 Langley Rd.
Glen Burnie



S&K Roofing, Siding, and Windows

5399 Enterprise St

Santos Contracting, LLC

301 Coldbrook Rd
Lutherville Timonium

Savon Contracting

111 Church Rd.
Owings Mills

SED Home Services, LLC.

PO Box 482

Sheldon & Sons Inc

3220 Hunting Tweed Dr.
Owings Mills

Singh Construction

206 Back River Neck Rd

Smart Home Services

15 W. Aylesbury Rd.
Lutherville Timonium

Smith & Sons Contracting Co Inc

8131 Solley Rd

Soundrite-Acoustics, Inc.

209 S. Stephanie Street

Standard Energy Solutions

1355 Piccard Dr

Stephen Lewis Barrett Contracting

12763 Liberty Rd
Union Bridge

Superior Design & Restoration

8902 Cowenton Rd
Perry Hall

Surewood builders, llc

4267 Arthur shipleyroad

TC Drywall LLC

468 Hammerstone Dr

Terminix - Owings Mills

10715F Red Run Blvd
Owings Mills

The Handy-Man

5600 Overlook court
White Marsh

The Home Wise Pros

327 E Ridgeville Blvd
Mount Airy

Thomas Roofing Company Inc

4353 Arters Mill Rd

Thornton Home Improvement Inc

5850 Waterloo Rd Ste 140



Universal Maintenance

65173 Seventh Road

USA Energy

800 Rosedale Avenue

USA Insulation

7554 Rickenbacker Dr


12637 S 265 W Suite 100

Weathermaster Custom Windows

2115 Eastern Ave

Western Pest Services

1850 York Rd

Wheaton Door & Window Company

5640 Sunnyside Ave

Winfield Builders

18213 Darnell Dr



Zero handyman Services

4346 Shamrock Ave

Shop Local Insulation Services in Millersville, MD

Join Angie's List to get the best local reviews in Millersville.

What Does My Membership Include?
  • Instant access to reviews for 700+ services
  • Exclusive service discounts - up to 70 percent off!
  • Top-notch support from our live call center
How does Angie's List work?
1. Say you need a Insulation Contractor
2. Angie's List has tons of detailed, local reviews.
3. Find a winner, and book them.
4. Angie's List is there to resolve any issues.
Good Morning America
Fox News
USA Today
The Wall Street Journal
MSN money