-Find top-rated Service Providers

Find Top-Rated Lothian Insulation Contractors

Angie's List helps you hire the best - and avoid the rest!

Insulation Contractors to Avoid

173

Top Rated Insulation Contractors

37

Prevent buyer's remorse with us

  • Over 3 million people trust Angie's List to help make the right choice
  • Be informed to avoid costly mistakes
  • Shop with us to ensure a fair price
  • Our complaint resolution team will help if a project goes bad
+See Verified Local Reviews

Over 16,742 reviews for
Lothian Insulation Contractors from people just like you.

A
"March &
were professional in explaining the process and answered all questions upfront. On the day of the service, the technicians went" over every step and addressed all concerns. When the technicians completed the job we could feel the difference right away since it was on the south side of the house. The old fiberglass insulation could not create a tight enough seal to keep the roof heat out of the second floor. I will use March &
for all my future spray foam needs.

-Jason K.

A
"We realized we had an issue when we were moving items out of our attic. The insulation was pulled down in spots, we saw droppings, and we realized we had a problem!" I immediately pulled up Angie's List to find providers to help us clean up the mess and install new insulation.
was super responsive and called me right back.
, a tech from the company came on time, inspected, took pictures and discussed options. We were freaking out and concerned at the damage.
talked us off the ledge and explained what we could expect, what was entailed in the cleanup and after the work was completed. On the day of our appointment,
, the project manager,
and the rest of the team showed up on time and ready to get started. Although the company would have moved our possessions out of the attic as part of the process, we ordered a dumpster ahead of time and pulled everything out of the attic before the team arrived. We used this time as an opportunity to clean out our clutter and repackage items we were moving back to the attic after the cleanup. We wanted to ensure everything was vermin free and that items were moved to clean/new plastic storage containers. The team was extremely friendly, efficient and professional. The process was completed around 1PM.
walked me through the work and demonstrated areas where they needed to "rodent proof" with steel mesh." The attic smelled of the solution that they sprayed and new insulation, but no smell of animal droppings or urine. The team then moved most of the items we had repackaged back to the attic. We deferred moving some of the items as there were some spots still wet from the solution that they sprayed to disinfect and we wanted to allow some time to dry. The team exceeded my expectations. They were easy to work with, followed up several times and answered all of my issues and concerns. They also provided my insurance company with pictures and information as requested. We called several other companies and although
was not the lowest estimate, they were the most comprehensive, and are run by a family. The employees who came to my home were very professional and understood our concerns and worked to help us resolve a very ugly situation. I highly recommend this company!

-Kathleen Z.

+Shop, Schedule, and Save on Services

Shop, Search and Save from anywhere!

  • Offers are exclusively provided by highly rated companies
  • Angie’s List members have access to exclusive discounts on local services
  • Shop, schedule, and stay on top of progress from any device
  • Our 30 Day Refund Guarantee means you can buy with confidence!
+Join 2 Million People on Angie's List

Over 2 million people trust Angie's List.

  • Your Membership Includes:
  • Instant access to top rated businesses covering 700+ services
  • Our Complaint Resolution Team to help when a project goes bad
  • On-the-go access to our iPhone, Android, & iPad apps
Find top-rated Service Providers
See Verified Local Reviews
Shop, Schedule, and Save on Services
Join 2 Million People on Angie's List

Local Articles in Lothian

Avoid Ice Dams With Proper Attic Insulation

An ice dam can cause serious problems to your roof without proper insulation.

By properly insulating your attic you can keep warm air from escaping and save money on your energy bills. (Photo courtesy of Vinay S. of North Brunswick, New Jersey)
Insulation

Hot air rises … but good insulation can keep your energy costs from doing the same thing.

Better air quality, quieter living spaces, comfort and better health are all reasons to reconsider your insulation choices. (Photo courtesy of Angie's List member Roseanne J. of Seattle)
Insulation

Not just for new construction, learn how foam insulation can be placed inside existing walls to make your home more comfortable.

While traditional fiberglass insulation is affordable and efficient, injection foam insulation can offer even more benefits. (Photo by Summer Galyan)
Insulation

Insulation isn't sexy, but it can keep you cool at night.

Angie's List
Appraisals - Real Estate, Architects & Building Design, Basement Waterproofing, Bathtub Refinishing & Liners, Biohazard Remediation, Builders - Garages/Barns/Sheds, Builders - Homes, Cabinet Making, Cabinet Refacing/Restoration, Carpentry - Unfinished, Carpentry - Woodworking, Carpet Sales/Installation/Repair, Chimney Caps, Chimney Repair, Chimney Sweep, Closets, Concrete - Leveling/Mudjacking, Concrete - Pouring & Repair, Concrete - Stamped & Decorative, Countertops, Deck Maintenance, Decks & Porches, Delivery Service, Dock Building & Repair, Doors, Drywall, Dumpster Service, Electrical, Epoxy Flooring, Excavating, Fireplaces, Floor Cleaning/Polishing/Waxing, Flooring Sales/Installation/Repair, Foundation Repair, Fountains, Garage Doors, Glass & Mirrors, Glass Block, Gutter Cleaning, Gutter Repair & Replacement, Handymen, Hardwood Flooring Sales/Installation/Refinishing, Hauling, Heating & A/C, Home Automation, Hurricane Shutters, Insulation, Land Surveying, Landscaping, Landscaping - Hardscaping & Pavers, Landscaping - Lakefront, Landscaping & Lighting, Lawn & Yard Work, Lawn Fertilization & Treatment, Lawn Irrigation, Lead Testing & Removal, Marble & Granite, Masonry, Mold Testing & Remediation, Moving, Painting - Exterior, Painting - Interior, Pest Control/Exterminating, Plumbing, Plumbing - Drain Cleaning, Pressure Washing, Radon Detection & Reduction, Remodeling - Basements, Remodeling - General, Remodeling - Kitchen & Bathroom, Remodeling - Modular & Mobile Home, Remodeling - Sunrooms & Patio Enclosures, Roof Cleaning, Roof Ice/Snow Removal, Roofing, Screen Repair, Septic Tank, Sewer Cleaning, Siding, Skylights, Stone & Gravel, Structural Engineering, Stucco, Tree Service, TV Service - Cable, TV Service - Satellite, Wallpaper Removal, Wallpapering, Window Cleaning, Window Tinting, Window Treatments, Windows, Windows - Egress, Windows - Safety & Security Film, Wrought Iron

Contractors say homeowners with this trait are the most satisfied with home improvement projects.

Angie's Answers

?

If you go the Better Business Bureau website you can see that the company has only had two complaints in the last 18 months and that they have both been resolved.  The company has an A+ rating.  This is not something you can buy.

 

There are genuine reviews on many 3rd party online review sites including AngiesList and the Better Business Bureau.  Simply do a Google search for "Smart Energy Today Reviews".

 

Sol Blanket Insulation acts as a radiant barrier, insulation and a vapor barrier.  It is not intended to replace traditional insulation but in fact compliments it and adds to it's ability to keep cool/hot air (depending on the season) in the home when the envelope of the home is properly sealed.  

 

Every attic is different and there are many other components that must be considered.  You mentioned an attic fan as well.  The heat that is radiated away from the ceiling by the Sol-Blanket Insulation is pushed out of the attic with an attic fan.  The US Department of Energy states that radiant barriers do work and suggest they be installed by professionals.

 

As with any product by any company if the product is not installed properly and other factors (attic fan, caulking and sealing, etc...) are not addressed then it will not be as effective.

?

A couple of comments about what Jim said:

1) Regarding type of insulation, in cold winter environments: Cellulose and fiberglass are actually about comparable in R value when installed - blown in cellulose runs from 3.2-3.8 R value, fiberglass batt 2.9-4.3 R value depending on manufacturer and whether hig-density or low density, high-efficiency or standard, according to official Department of Energy publications. Measured values in attic test cases, in areas with a true winter, after 10 years showed a decrease from 3.4 (in the test case) down to 2.1 for cellulose, and 3.5 to 3.3 for fiberglass batt, due to packing or matting. In an attic environment, there WILL be condensation or frost on the insulation at some point during the year (assuming an area with true winters) and in highly insulated houses commonly for a substantial time period each winter. Fiberglass packs down slightly from that weight but mostly rebounds, cellulose packs down and mats and does not substantially recover, so over the years cellulose loses 1/3 to close to 1/2 its insulation value, fiberglass about 10%.

2) a note on radiation barriers attached to the bottom of the rafters - there are a lot of installers and homeowners making two major mistakes with this product that can cause major trouble: First, be sure to terminate it short of the eave openings. I have seen cases where it was carried all the way out to the fascia board, thereby blocking all airflow on the underside of the roof. Even carrying it all the way to the eaves along the bottom of the rafters will block off ventilation to the main attic area. You have to leave the air space between the rafters open to full airflow from the soffit/eave area ot the ridge vent. Second, do NOT run it continuous from eave to eave across the full width of the attic - leave a gap about a foot wide under the ridge vents so warm and moist air in the attic can vent through the ridge vent. Closing the ridge vent area off with the radiant barrier effectively puts a vapor barrier around the main attic area, causing retention of the moisture which WILL accumulate there, promoting mold.

?

Obviously this is not a timely response to the initial question. However, for those who may be reading these answers at a later time, a couple of added thoughts:

1) the radiant barrier being discussed is basically heavy-duty metal foil or metallized surface on a plastic sheet, intended to reflect RADIATED heat (infrared radiation - think heat light, or heat you can feel at a distance radiated from a fireplace), the same way a mirror reflects light. Radiated heat is how a standard oven broils and how steam and hot water baseboard heat predominately work.

2) you generally should do NOT place a radiant barrier over the insulation that lies between and over the joists in a normal attic, especially in a region where the attic temperature can frequently reach condensation temperature (below about 45-50 degrees) - it may reflect back some of the house heat that is coming up from the house, but by destroying most of the temperature gradient from the house to the attic air destroys much of the driving force that moves moisture to the attic air and subsequent venting. Between that greater heat and the fact the barrier is also a moisture barrier, that makes a perfect condition for mold and rot in your insulation and attic wood, and has become quite an issue in energy upgraded homes because of retrofits that cut off airflow outside the insulation, but do not cut off the moisture source leaking thorough from the house. The proper and ONLY place for a vapor barrier in a normal attic insulation system is on the pressurized and normal warm, humid side of the insulation zone - directly above the ceiling drywall in the top floor, fastened to the UNDERSIDE of the ceiling joists or trusses, NOT anywhere above that. Perforated barriers are supposed to reduce this tendency, but the perforation area percentage is so small that typically they still act as a vapor varrier, just not a totally effective one.

3) radiant barriers reflect radiated heat ewith up to 99% efficiency but have basically zero resistance to CONDUCTION (body to body heat transfer at points of contact - think heat transfer from your warm hand to a frozen cold drink can, or hot pavement heat transfer to the bottom of your feet) - so there needs to be an air gap between the radiant barrier and the hot item passing the heat to it, otherwise the heat will just pass through it by conduction. Therefore, applying it directly to the sheathing (above or below) or manufacturing it directly on the surface of the sheathing defeats its purpose, even though this is commonly done.

4) there is a lot of discussion, particularly in the professional design community, about attic radiant heat barrier effectiveness and problems. Because they are being installed on the bottom of the sheathing or underside of roof joists, they act as a heat trap for the energy being conducted through the roof which would normally radiate into the attic air or be transferred by CONVECTION (fluid flow heat transfer) to the attic air, and be vented through roof vents, ridge vents, gable vents, etc. By trapping that heat, they are causing the underside of the shingles and particularly the felt and sheathing to get a lot hotter than they otherside would, essentially changing it from a system where the shingle top surface might reach 120-180 F and the inside surface of the sheathing about 80-140F in the summer, to making the entire roof system equal to the outside surface temperature. This causes more rapid shingle deterioration and cracking, and makes the felt or plastic moisture barrier under the shingles brittle and subject to failure.

Also, any moisture above the radiant barrier (from roof leaks or humid air coming into the area) is prevented from evaporating by the attic airflow which would normally remove it, so it starts acting like a steamer. I have seen both wood and metal lofts and attics become a major mold farm in months because of this effect, and a couple of roofs which started sagging due to rotted sheathing within 2 years of reroofing with tightly adhered radiant barrier. Some radiant barriers are vapor-permeable to reduce the moisture issue, many are not, but few actually are effective in letting moisture freely escape.

Having seen these products in use, and having analyzed and specified building products for use from the Middle East to the Arctic for decades, and having a Masters in Arctic Engineering (a degree predominately in energy conservation and heat flow), my personal opinion is that these radiant barriers will be banned by code within 10-15 years for unheated (so-called "cold" roofs) roofs, because they just do not use the principles of thermodynamics correctly. For more info on this issue Google the following search phrase  - moisture trapping by radiant attic barriers       and read the government (not the manufacturer) literature on the issue.

5) Unfortunately, the right way to handle this issue is to put the radiant surface on the OUTSIDE of the house - by using reflective materials on the roofing material. This is already done with flat roofs, house trailers, and industrial structures by spraying with alumiunum paint, and a few brands offer reflective aggregate shingles that are slightly more reflective and radiant than normal shingles. People obviously do not like this reflective surface from an aesthetic standpoint, though with solar cells coming into more general use this may soon be more widely adopted. The idea should be to keep the solar energy from penetrating into the building envelope at all, not try to re-reflect it away after it has penetrated throguh the roof system.

The sprayed-in foam has a couple of issues you need to be aware of:

6) it needs to be the low-pressure expanding type mixed for use around window frames, as fully expanding foam can bow joists or trusses and pop drywall ceilings free as it expands, and non-expanding foam actually shrinks as it cures, leaving gaps for air and heat flow alongside the ceiling joists.

7) being closed-cell it is essentially impervious to moisture, so the vapor barrier on the house side has to be EXCELLENT (incuding sealingof all penetrations), or it will trap household moisture escaping into the attic and promote mold and rot in the ceiling drywall and joists.

8) it tends to bleed chemical fumes into the house for a long period of time (can be noticeable for years), which may be objectionable to some people from an odor or environmental standpoint, and especially should be considered if any residents have severe allergy issues or respiratory problems.

9) I emphatically recommend AGAINST use of sprayed-in foam between ceiling joists or truss members in any area that can have cold attic air that could cause moisture condensation in the insulation, though this is probably not a significant problem where you live, assuming your Dallas is the city in Texas. For essentially year-around air-conditioned homes in hot climates, the problem can actually be condensation of attic air moisture on and in the colder ceiling surface insulation and on cold attic runs of air conditioned air, so attic ventilation becomes a critical issue to remove the moisture before it condenses.

In summary, having seen an awful lot of attic moisture and thermal problems, my personal recommendation would be to ensure excellent sealing of the house from the attic, use normal UNFACED fiberglass insulation, and instead of a radiant barrier ensure adequate full-attic ventilation. If you decide to got with a radiant barrier, then I would recommend a perforated one, sloping up towards the sides a foot or two and stopping a foot or so clear at the sides so moist air under it can escape to the roof joist spaces and be vented from the attic. I have seen this done several times with a fine nylon net strung above the insulation in the attic, supporting the barrier, resulting in something very similar to the double-roof system used in bedouin tents, where airflow between the two layers keep the hot air away from the living space.

?
Steve made a good point.  Also, while it isn't required to remove the old insulation you can check the ductwork, wiring, etc. with the old stuff removed,  You can also spray foam around all openings and holes in wall top plates to better seal your home as Steve was pointing out.  My concern is the potential for mold spores you mentioned in your question.  If you suspect there are any get a good company in to remove the old and clean the attic.  Another concern is asbestos.  Your home is old enough you could have it in there and that's worse than mold if released into the air.

Todd Shell
Todd's Home Services
?

A moisture barrier has to be on the warm side ie towards the heated side.  Most people would not install a moisture barrier in your situation.  (They also sell a paint that you can use on your interior ceiling? as a moisture barrier).  Rather most homeowners would hire an insulation contractor to blow a cap over the existing insulation bringing it up to your areas reccomended levels,,Your power company can tell you the level, I would guess R 40.  What you use is up to your wallet, the best is a spray foam that can be applied to the ceiling or over the whole shebang.  Being a bit of a miser I would trot on down to my local big box store and buy a truckload of cellulose and get a free blower for I and a friend to self insulte.  Big box= Menards, Lowes etc.  Cellulose= ground up paper treated with boron for insect control and fireproofing.  It has a high R value and will stop moving air loss from the home. Before you cap current mostly emply attic is ideal time to take sealant to any openings in the attic floor,  like pocket doors, canister lights electircal wires and close off the air leaks from inside.  If foaming skip this.  Hot air rises so you save yourself a ton air sealing the home.

An attic radiant barrier is also a possiblity see my blog for nifty results on it.

Jim Casper Old Energy Conservation Guru

ps moving existing insulation use a plastic rake

?

Have you checked Angie’s List? Angie’s List Answers is a great place to find advice from professionals, but for ratings, reviews and information to help you hire the companies you need, visit www.angieslist.com today.

 

 

Insulation reviews in Lothian

D

Rating
I contracted with them for 6" open cell foam insulation to be sprayed onto the side walls of my shop. They finished and left the bill taped to the door. Upon inspection when I got home from work I could see about 50-75% of the walls only had about 4" of insulation. I called
Lothian Insulation Contractors Provider Name Locked
the next morning and he sounded irritated that I didn't think it was good enough but he did send someone up to fix the problem. He said I would need to be there after he was done to approve it, I agreed, They called when they said they were done so I went out to inspect and they had only touched up a few places. The guy argued that I didn't need all that insulation and it wasn't an exact science and if you overfilled it you would just have to cut it off and with the knife they used it would dip in an inch and a half so I wouldn't be any better off it would just waste insulation. He also said I had 7" in places. I have 2x6 studs with 3/4 fur strips the tin is screwed to so the walls are 6 and 1/4" thick. Well he thought the three 3/4" ribs on a 3' wide piece of tin used an inch of insulation thickness!! He finally agreed to fix any areas that I pointed out. I showed him several. I had to get back to work and gave him a check. When I got home it wasn't much better than when I left. I spent 2 hours the next Saturday morning cleaning up the insulation that he didn't sweep up. I am considering contacting someone else to come in and finish the job.
- Rick B.
A

Rating
Excellent job. The crew was here for 2 days cleaning out the entire space and treating surfaces for mold/fungus. They returned for another 2.5 days to install the liner. The
Lothian Insulation Contractors Provider Name Locked
is now totally encapsulated and looks fantastic.
- Deborah O.
C

Rating
After a month after the house was looked at by the provider, I still have not received the quote. If the work is of now interest or can not be performed for any reason, the provider should share this information and do not let people hanging.

- Dominique B.
A

Rating
Lothian Insulation Contractors Provider Name Locked
and two co-workers sealed and insulated my attic. They used aluminum flashing and high-temperature silicone caulk to seal gaps around the chimney flue, and used expanding foam or caulk to seal the cracks and openings around plumbing vent pipes and electrical wires. They installed a solar attic fan in the gable vent. They extended the rafter vents, blew in additional loose fill insulation to achieve R38 (recommended for Zone 4 Asheville NC) and added an attic stair insulator.
Lothian Insulation Contractors Provider Name Locked
,
Lothian Insulation Contractors Provider Name Locked
and Bill were very courteous and extremely professional and knowledgeable. I would highly recommend
Lothian Insulation Contractors Provider Name Locked
.


- Julee V.
A

Rating
AIS was very professional and always on time. We handled most communication via text and email and everything went very smoothly.. Great to work with, fast service and professional! Would highly recommend to others.
- James K.
N

Rating
I was very impressed with the work that was done and how hard the crew worked. They showed up on time and worked hard the entire time. They respected the house and made sure to keep it nice and clean. I give them a 10/10!
- Dave M.
A

Rating
They were very professional, they helped me move some things out the crawlspace. They were early, just like they said they would be, and cleaned up after themselves. The owner came out with the crew, and I was very impressed with the respect they had for my home.
- Cornelia J.
A

Rating
I tore down a section of my house and rebuilt it - new construction. I had my attic (i.e., roof deck, attic side walls and end walls) insulated by
Lothian Insulation Contractors Provider Name Locked
, with open cell spray foam. I got multiple estimates from several different companies. While
Lothian Insulation Contractors Provider Name Locked
was not the cheapest, I went with them because of their knowledge of the process, their professionalism dealing with me, and their input on other areas of my house, including
Lothian Insulation Contractors Provider Name Locked
pipe insulation and tips on insulating the side walls of the living area.
Lothian Insulation Contractors Provider Name Locked
was very patient with me as I was obtaining other estimates, and always answered all my questions promptly. When "job day" came, he and his crew showed up on time. They were all very personable and most importantly they did a great job, including cleanup. I would definitely recommend
Lothian Insulation Contractors Provider Name Locked
to others.
- Carolyn S.

Insulation Contractors in Lothian, MD

Companies below are listed in alphabetical order. To view top rated service providers along with reviews and ratings, Join Angie's List Now!

84 LUMBER CO

1704 HARFORD RD
Bel Air

A & F Construction Services

3 Clear Skys
Baltimore

A & J Home Remodeling

3212 South 13th Rd

A CLOSER LOOK HOME INSPECTION

1458 ALLEN WAY
Westminster

A-1 Roofing's Kanga Roof

6360 S Hanover Rd
Elkridge

A-Z Home Enhancements, Inc.

503 Cedarwood Ct
Bel Air

Advanced Green Home Solutions

285 Pinewood Road
Millersville

AES BUILDER & HOME IMPROVEMENTS

6915 GOLDEN RING RD
Rosedale

All Aspects Waterproofing

8735 Bollman Pl
Savage

All done

412 chestnut ct
Dundalk

Allied Remodeling Corporation

1212 E Joppa Rd
Towson

AMERICAN CONSTRUCTION SERVICES

10602 Guilford Road
Jessup

American Home Shield

889 Ridge Lake Blvd

American Home Specialists

13221 Mockingbird ln
Bowie

American Mold & Restoration

3540 Crain Hwy
Bowie

Area Roofing & Siding Company

5800 Woodcliff Rd
Bowie

Atlantic Acquisitions, LLC

53 Odeon Ct
Parkville

BADGER CONTRACTING INC

9505 Reisterstown Road 2N
Owings Mills

Baltimore Siding & Window Co

2682 Ideal Court
Manchester

Basement Masters

1680 E Gude Dr
Rockville

Bellanca Handyman Services

755 Melville Ave
Baltimore

BILT-RITE CONTRACTORS INC

1833 York Rd
Lutherville Timonium

Blair Construction LLC

301 Najoles Rd
Millersville

Blue Dot Services - 8554

125 Industry Ln
Forest Hill

Bob Grill General Contractor Inc

9817 Lanham Severn Rd
Lanham

BOOTH CONSTRUCTION & GENERAL

3907 Conifer Lane
Bowie

Bowen Remodeling and Design

2146 Priest Bridge Ct Ste 2
Crofton

Boxer Construction LLC

612 Highland Av
Towson

Brucksch and Sons Contracting, LLC

1617 Kimber Rd
Glen Burnie

C & R Insulation LLC

1290 Bay Dale Dr
Arnold

C N M Installations Inc

3535 Honey Suckle Ln
Middle River

Caliber Home Restoration

100 Oak Drive
Catonsville

Caperones Contracting

1334 Swan Dr
Annapolis

Capital Insulation Svcs of MD

502 McCormick Drive Suite D
Glen Burnie

Catonsville Contractors

106 South Morerick Ave
Catonsville

Certified Home Remodelers Inc

300 Cabernet Dr
Westminster

Certified Inc

13509 Paternal Gift Drive
Highland

Charm City Remodeling

278 Beckworth Ct
Severna Park

Chesapeake Window & Remodeling Inc

3133 Acton Rd
Parkville

CHEVY CHASE REMODELING

7722 Whiterim Ter
Potomac

Complete Home Solutions LLC

235 W Bay Front Rd
Lothian

CONTINUUM ENERGY SOLUTIONS

5645 General Washington Dr

Cooper's Construction

P.O. Box 4221
Crofton

Custom Carpentry Plus

9815 Ritchie Ct
Frederick

Dan Nichols Contractor

5777 White Rock Road
Sykesville

DEVERE INSULATION HOME PERFORMANCE

508 McCormick Dr. Suite H
Glen Burnie

DIRZUWEIT & SONS BUILDERS INC

1646 WHITEFORD RD
Darlington

DJ's Construction

2321 Manchester Rd
Westminster

Dorsey Contractors Inc.

13090 Old Frederick Rd
Sykesville

Dr Energy Saver

889 Airport Park Rd
Glen Burnie

DREAM IT/ BUILD IT INC

12 SPINNAKER REEF CT
Middle River

DSE Carpentry

271 A Arundel Beach Rd
Severna Park

DUCTZ of the Upper Bay Region

2501 Derby Drive
Fallston

Dunne Wright Services Llc

1412 Crain Hwy N
Glen Burnie

East Coast Custom Construction LLC

3383 yellow SPGS. S
Laurel

EC Roofing and Home Services Direct

837 Frederick Road
Catonsville

EcoMize USA

18 Dickens Sq
Lutherville Timonium

EMA Contracting, LLC

213 N. Union Ave.
Havre De Grace

EMB HOMES LLC

PO BOX 25707
Baltimore

Emmanuel Woodworks LLC

616 broach Ct
Annapolis

Envyro Technologies LLC

1588 Jarrettsville Rd
Jarrettsville

Ernest Maier, Inc.

4700 ANNAPOLIS RD
Bladensburg

Exin Solutions Inc

8515 Blounts Ln
Fulton

Eye See Improvement

4605 Old Court Rd
Pikesville

FORSYTH CONSTRUCTION LLC

2900 Andrea Ave.
Parkville

Fox First Construction

1744 Carry Pl
Crofton

Gambrills Home Improvements

2470 Wintergreen Wy
Gambrills

Gede Insulation

2129 Pulaski Hwy
Havre De Grace

Gem Construction Co Inc

2013 Longview Ave
Rosedale

General Home Improvement LLC

1806 Virginia ST
Annapolis

Gottpower Services Inc.

8372 Lockwood Rd.
Pasadena

GREAT WHITE CONSTRUCTION

27943 Oaklands Circle
Easton

GREENBUILDERS INC

4033 OSBORN RD
Reisterstown

Greentech LLC

101 Chestnut St
Gaithersburg

GreenWorks Systems

9124 Belair Rd.

GSmulti-services

12 National Dr
Essex

Gutterglove of Maryland

14625 Baltimore Ave
Laurel

Handyman on Call LLC

218 Main St
Reisterstown

Handyman Services Unlimited, Llc.

855 BIRCHWOOD CT
Arnold

Harbor & Waterford Corp.

6012 Harford Road
Baltimore

Harbor Kitchen Design

6012 Harford Rd
Baltimore

Harford Insulation

7501 Resource Ct
Baltimore

HIGHLIGHT CONSTRUCTION CO.,INC

4130 HOME DALE RD
Sykesville

Hollenczer Construction Inc

201 Oakwood Ln
Stevensville

Home Contractors Plus

8402 Quill Point Dr
Bowie

Home Energy Loss Professionals (HELP)

7329 Holabird Avenue
Baltimore

Home Pro Roofing & Remodeling LLC

2144 Priest Bridge Ct
Crofton

HomeFinishers

Northeast
Baltimore

Honey Do Handyman Service

948 Ships Bell Ct
Annapolis

Horizon Unlimited Home Improvements Inc

7387 Washington Blvd
Elkridge

Householder Contractor Services LLC

415 Valley Meadow Cir
Reisterstown

IMPROVEMENT ZONE LLC

St Johns Drive
Annapolis

Innovative Elements Inc

1510 Suite H Caton Center Drive
Halethorpe

Insulators Home Exteriors

15430 D Old Columbia Pike
Burtonsville

INTEGRITY HOME REMODELING SERVICES

108 PLEASANT HILL RD
Owings Mills

Ivy League Construction LLC

6414 Deer Park Rd
Reisterstown

J.S. Remodeling

1726 Waldorf Ct
Crofton

James L Graves Construction

750 Route 3 South
Gambrills

James McDonald Roofing

14625 Baltimore Ave
Laurel

JLB BuildersLLC

206 Arundel Beach Rd
Severna Park

JLI Services Inc.

13318 Keating Street
Rockville

JVS General Contractor LLC

milford mill rd
Baltimore

K&R RoofMasters

151 Schooner Ln #30
Prince Frederick

Kargmans Inc

10429 Reisterstown Rd
Owings Mills

Kat Construction Services, LLC

2108 Emmorton Park Rd
Edgewood

Kevin's Handyman Services LLC

420 Spaulding Ct
Westminster

KNK Construction, LLC

P.O. Box 327
Abingdon

L&V Quality Contractor LLC.

2419 Yarmouth lane

LAFLEUR ASSOCIATES

7386 HOPKINS WAY
Clarksville

LAROSA CONSTRUCTION CO

333 EDGEMERE DR
Annapolis

Leon Builders LLC

2750 North Rosedale Street
Baltimore

Leverage Contractors Inc

7424 Prince George Rd
Pikesville

M Squared Construction Corp.

P.O. Box 1494
Ellicott City

M&M Commercial Contractors

325 Wise Avenue
Dundalk

M2000 DEVELOPMENT CORPORATION

4208 FERNHILL AVE
Baltimore

MAGGIO CONSTRUCTION CO

PO Box 1210
Millersville

Marvin's General Contractors Inc

316 Duxbury Rd
Silver Spring

Maryland Home Improvement Co

6 Delrey Ave
Catonsville

Mastoras & Nikolaou Construction

622 South Newkirk Street
Baltimore

McCabe's Home Improvements

1909 TYLER RD
Dundalk

MDB Carpet & Restoration Services

2223 Anapolios Rd
Baltimore

Melchior

852 W 35th St
Baltimore

metropolis

10400 Eaton Pl Ste 203

MEYERS CONSTRUCTION CO

1121 GREENWOOD RD
Pikesville

MH Construction, Inc

PO Box 124
Linthicum Heights

Misha's Home Improvement Inc

1257 Baltimore Annapolis Blvd
Arnold

MJ Home Services LLC

4367 Hollins Ferry Rd
Baltimore

MoldGone LLC

2508 Locustwood Pl
Silver Spring

Moreland Contracting Inc

748 Ticonderoga Ave
Severna Park

Mr Basement

832 Oregon Ave
Linthicum Heights

Mr. Handyman of Anne Arundel & NE PG

8424 Veterans Hwy
Millersville

Nowicki Construction

PO Box 934
Severna Park

NuLife LLC Home Improvements and Services

7804 Birmingham Avenue
Nottingham

Old Time Contractors Inc

211 Adam Smith Street
Sykesville

Owings Brothers Contractors

1912 Liberty Rd
Sykesville

P & M INSULATION

432 OLD LINE AVE
Davidsonville

Pinnacle improvements

8072 Woodholme Cir
Pasadena

PLS Custom Homes & Renovations

261 Burrisville Rd
Centreville

Post & Beam Design/Build

14346 Jarrettsville Pike #400
Phoenix

Power Home Remodeling Group

6404 Ivy Ln
Greenbelt

Premier Siding & Roofing

2457 Perkiomen Ave

Premier Window & Building Inc

9515 Reisterstown Rd
Owings Mills

Premo Ind. Welding & Fabrication

10004 Pulaski Hwy Suite C

PROENERGY CONSULTANTS

39 HEMISON CT
Pikesville

Property Restoration Services, LLC

501 W Main St
Emmitsburg

Quality Home Solutions, llc

7672 2nd Street
Pasadena

R. Hudson & Sons

5605 Waterloo Rd
Ellicott City

RealtyFX

423 Deacon Brook Cir
Reisterstown

Referred By Renovators Inc

1494 Governor Bridge Rd
Davidsonville

Regional Property Group

PO Box 270
Lusby

Reliability Home

2819 N Point Blvd
Baltimore

Remodel USA

605 Hampton Park Blvd
Capitol Heights

Rick Braida Design|Build

2222 E. Fairmount Ave
Baltimore

Robinson's Handyman/Home Improvement

778 Harmony Avenue
Arnold

Rocky's Roofing & Siding Inc

1108 Hoods Mill Rd
Woodbine

Roof Right Inc

1621 Hanover Pike
Hampstead

Roy P. Mitchell Home Improvements

1003 Langley Rd.
Glen Burnie

S&K Roofing, Siding, and Windows

5399 Enterprise St
Sykesville

Santos Contracting, LLC

301 Coldbrook Rd
Lutherville Timonium

Savon Contracting

111 Church Rd.
Owings Mills

SED Home Services, LLC.

PO Box 482
Phoenix

Sheldon & Sons Inc

3220 Hunting Tweed Dr.
Owings Mills

Singh Construction

206 Back River Neck Rd
Essex

Smart Home Services

15 W. Aylesbury Rd.
Lutherville Timonium

Smith & Sons Contracting Co Inc

8131 Solley Rd
Pasadena

Soundrite-Acoustics, Inc.

209 S. Stephanie Street

Standard Energy Solutions

1355 Piccard Dr
Rockville

Stephen Lewis Barrett Contracting

12763 Liberty Rd
Union Bridge

Superior Design & Restoration

8902 Cowenton Rd
Perry Hall

Surewood builders, llc

4267 Arthur shipleyroad
Westminster

TC Drywall LLC

468 Hammerstone Dr
Westminster

Terminix - Owings Mills

10715F Red Run Blvd
Owings Mills

The Handy-Man

5600 Overlook court
White Marsh

The Home Wise Pros

327 E Ridgeville Blvd
Mount Airy

Thomas Roofing Company Inc

4353 Arters Mill Rd
Westminster

Thornton Home Improvement Inc

5850 Waterloo Rd Ste 140
Columbia

TONY LABATA ASSOCIATES

232 N. CAREY ST, SUITE 1
Baltimore

Universal Maintenance

65173 Seventh Road

USA Energy

800 Rosedale Avenue
Rosedale

USA Insulation

7554 Rickenbacker Dr
Gaithersburg

Warmzone

12637 S 265 W Suite 100

Weathermaster Custom Windows

2115 Eastern Ave
Baltimore

Western Pest Services

202 Perry Pkwy
Gaithersburg

Wheaton Door & Window Company

5640 Sunnyside Ave
Beltsville

Winfield Builders

18213 Darnell Dr
Olney

WS CONTRACTORS INC

4953 BRISTLE CONE CIR
Aberdeen

Zero handyman Services

4346 Shamrock Ave
Baltimore

Shop Local Insulation Services in Lothian, MD

Join Angie's List to get the best local reviews in Lothian.

What Does My Membership Include?
  • Instant access to reviews for 700+ services
  • Exclusive service discounts - up to 70 percent off!
  • Top-notch support from our live call center
How does Angie's List work?
1. Say you need a Insulation Contractor
2. Angie's List has tons of detailed, local reviews.
3. Find a winner, and book them.
4. Angie's List is there to resolve any issues.
CBS
Good Morning America
Fox News
USA Today
The Wall Street Journal
MSN money