-Find top-rated Service Providers
Find top-rated Service Providers

Find Top-Rated Brockton Garage Door Companies

Angie's List helps you hire the best - and avoid the rest!

Prevent buyer's remorse with us

  • Over 3 million people trust Angie's List to help make the right choice
  • Be informed to avoid costly mistakes
  • Shop with us to ensure a fair price
  • Our complaint resolution team will help if a project goes bad
+Shop, Schedule, and Save on Services
Shop, Schedule, and Save on Services

Shop, Search and Save from anywhere!

  • Offers are exclusively provided by highly rated companies
  • Angie’s List members have access to exclusive discounts on local services
  • Shop, schedule, and stay on top of progress from any device
  • Our 30 Day Refund Guarantee means you can buy with confidence!
+Join 2 Million People on Angie's List
Shop, Schedule, and Save on Services

Over 2 million people trust Angie's List.

  • Your Membership Includes:
  • Instant access to top rated businesses covering 700+ services
  • Our Complaint Resolution Team to help when a project goes bad
  • On-the-go access to our iPhone, Android, & iPad apps
Find top-rated Service Providers
Shop, Schedule, and Save on Services
Join 2 Million People on Angie's List

Local Articles in Brockton

steel garage door

Garage Doors and Openers

A homeowner's guide to garage doors, including how garage door openers work, preserving safety, how to maintain them, who to call when they need repair, and options when buying a new door.

Don't let your garage become a dumping ground; a professional organizer can help you clear the clutter and regain your space.

sticky notes

For 2016, Angie's List editors recommend adding these 16 home improvement projects to your New Year's resolutions.

A wind load garage door will stand strong and help keep out debris during a storm.

interior side by side white garage doors (Photo by Summer Galyan)

If you're lucky, your garage door opener will last you as long as 15 years. Here's how to pick the right type for your home.

Angie's Answers


Here's the video I used - I found it pretty helpful:


Garage door spring replacements cost me less than $100 by doing it myself and only took me about 25 minutes. As far as I know, changing out the garage door springs will solve most issues. I found at kit online at a place called garage door nation and just bought that one since they seemed the most legit and included all the extras.


I am usually not good with these types of things. I saved almost $500 by doing it myself.

Hope this helps!



Hello Salem,
The important thing to look at with the doors you are considering is the Gauge of the door (the thickness of the metal) and the grade of the hardware being used. there are nominal Gauge doors and true Gauge doors, A 25G (G = Gauge) Door is acutually .025 of an inch thick, a nominal 25G door is actually 26G or 27G (thinner) but reinforced to act like a True 25G. A nominal Door is generally weaker and still prone to dents and damage eiser that a true thicker door.
The Hardware  is very important, Are you going to get rollers with bearings and a nylon cap (quiet,long life), or a roller that is a plastic wheel on a metal shaft (no Bearings), or a metal wheel (noisy over time).
are you going to get the full body 14g Hinge (strongest and most supportive), or the medium body 16g-18g Hinge (narrower, thinner, not as supportive).
The last thing to consider is the Torsion Spring, from th price you mentioned I am guessing you are gettting custom doors , It is important that the springs you get are meant to last a while ask the companies what cycle spring they are going to provide? the one with the higher cycle life is definatly going to save you money in the future.
Based on experience and actualling working with both companies it is my personal opinion that Raynor provides better products and parts up front with out having to pay more but companies are different everywhere I always recommend asking about these things.
I hope this helped, please feel free to contact us if you have any questions.

Assuming you are talking rollup garage door - issues similar but not as many parts on a tilt-up door.

Many rollup doors in residential use go 30 years or more on original springs.

Generally, they do not need to be replaced till they break. A broken one should be pretty obvious - the door will open very hard because it is being pulled up more at one side than the other, if at all, and one spring will be wound tight while the other will be looser, and usually the break is a visibly obvious one - either a visible break in the main portion of the spring, or the free end that goes into the end plate is broken off. Compare the springs against each other to see they look the same.

Also, if you think a spring is broken but can't see anything wrong, maybe the set screws that hold the end plates tight onthe axle have vibrated loose, relaxing the tension on the spring.

As the door gets older you may need to have a garage door repairman adjust the spring tension tighter if the door starts opening hard or balking at opening, though that is more often a problem with dirty slider track and bearings from dust accumulation, which you can clean with WD40 and then lubricate the side support rollers with motor oil or household oilcan. On lubrication of the slider track there are differences of opinion - some say clean with a non-oily solvent like brake cleaner and leave it clean and ddry so dust does not stick to it, other say oil with a light household oil or WD40. I prefer the latter so the plastic slider does not get worn out sliding on the metal slider track or pole, though it definitely does accumulate an oily dust grunge. The cleaning and lubricating should be done at least yearly - every 3-6 months if you use the door multiple times a day, more often if you are in a real dusty area like the Dust Bowl, the desert, or close to the beach.




I think he is trying to upsell you on something you don't need, or their company policy is neer fix, always replace - some companies are in that mode not, to prevent future call-backs when it does not work.


IF only needs screws, sounds like a good do it yourself job with self-tapping sheet metal screws. Or a Handyman could do for maybe $50-70 if that is all that is needed.


If the weatherstrip is damaged and in on the front edge of the garage door, one other possibility - replace with one like this, or screw a bottom compression type rubber weatherstrip on the bottom of the door - actually work a lot better than the face-mounted ones anyway, in my opinion. Look like this from M-D Building Products and Frost King among others. Can also be used nailed to frame to flap contacts door face as an edge and top weatherstrip - 


Maintanence is going to vary by how much you use the door.  If it is used multiple times a day as cars go in and out I recommend having it checked annually.  You want someone to lube all of the proper points and inspect the rollers for wear or damage.  You don't want a component of that door failing and falling on yourself or a child.  Sometimes tracks need to be adjusted or realigned for various reasons.  Also, the springs can weaken and break causing the door to fall.  Have those checked as well.

Todd Shell
Todd's Home Services

Garage Door Companies in Brockton, MA

Companies below are listed in alphabetical order. To view top rated service providers along with reviews and ratings, Join Angie's List Now!

Shop Local Garage Door Installation Services in Brockton, MA

Join Angie's List to get the best local reviews in Brockton.

What Does My Membership Include?
  • Instant access to reviews for 700+ services
  • Exclusive service discounts - up to 70 percent off!
  • Top-notch support from our live call center
How does Angie's List work?
1. Say you need a Garage Door
2. Angie's List has tons of detailed, local reviews.
3. Find a winner, and book them.
4. Angie's List is there to resolve any issues.
Good Morning America
Fox News
USA Today
The Wall Street Journal
MSN money