-Find top-rated Service Providers

Find Top-Rated Ft. Mitchell HVAC Contractors

Angie's List helps you hire the best - and avoid the rest!

HVAC Contractors to Avoid

125

Top Rated HVAC Contractors

113

Prevent buyer's remorse with us

  • Over 3 million people trust Angie's List to help make the right choice
  • Be informed to avoid costly mistakes
  • Shop with us to ensure a fair price
  • Our complaint resolution team will help if a project goes bad
+See Verified Local Reviews

Over 15,171 reviews for
Ft. Mitchell HVAC Contractors from people just like you.

A
"I cannot even express how professional this company is my story is a long one but all I can say is I will continue to use this company as long as I can and I hope"
will always be my technician..
is the sweetest person you could ever speak to and she listens and does not put you off....
found out I needed a new motor our insurance company could not work with their Company so I had to call American home Shield to find someone else.they sent out a company called Infinityheating and air all I have to say to anybody who reads this is beware this company infinity heating and air is a joke!!!when
came out again to check something they said was wrong there was actually nothing wrong the guy had turned off my heat for no reason it was just the motor..I am still waiting on a motor from Infinity heating and air!!and just to show you how professional
was he said he would come out and check the job that infinity heating and air did with the motor to make sure they did it properly...all I can say is thank you
thank you for all of your hard work on my roof and I will continue to use this wonderful professional company again and again..

-Joni A.

B
"I scheduled a furnace inspection with a deal through
for $60. The service rep found that the exhaust pipe was cracked and tried to charge" me $250 for a "diagnostic" without telling me what he was doing was going to be cost more than the $60 for the inspection. In the end, I ended up using the $60 coupon from Angie's list plus paying about $775 to replace the exhaust pipe. I think this charge was very high, so in the future, if anything major needs to be done, I will definitely shop around for a better price. I'm also concerned that 3 months later, the furnace is starting to do what it was doing previously (cycle on/off a few times when starting until it stays on) before the exhaust pipe was replaced.

-Matthew W.

+Shop, Schedule, and Save on Services

Shop, Search and Save from anywhere!

  • Offers are exclusively provided by highly rated companies
  • Angie’s List members have access to exclusive discounts on local services
  • Shop, schedule, and stay on top of progress from any device
  • Our 30 Day Refund Guarantee means you can buy with confidence!
+Join 2 Million People on Angie's List

Over 2 million people trust Angie's List.

  • Your Membership Includes:
  • Instant access to top rated businesses covering 700+ services
  • Our Complaint Resolution Team to help when a project goes bad
  • On-the-go access to our iPhone, Android, & iPad apps
Find top-rated Service Providers
See Verified Local Reviews
Shop, Schedule, and Save on Services
Join 2 Million People on Angie's List

Local Articles in Ft. Mitchell

Hiring an HVAC service

The awkward-to-pronounce acronym stands for "heating, ventilation and air conditioning" which in many respects are completely different processes.

AIDGkAau1Ng

HVAC Maintenance

You can help your heating and cooling systems work more efficiently and last longer by tending to regular maintenance. Some things, like changing the furnace filter, can easily be done by the homeowner.

Because a ceiling fan doesn’t actually cool a room, you can turn off the fan when you leave the room and save on your electric bill. (Photo courtesy of Angie's List member Marvin Y. of Albany, New York)
Heating & A/C

Learning the real story behind some of those common air conditioning assumptions can help you to keep your system operating more efficiently.

 (Photo by Photo by Brandon Smith)
Heating & A/C

Learn more about the different efficiency ratings for HVAC equipment and how they impact the performance of your air conditioner, heat pump or furnace.

HVAC
Heating & A/C

Three highly rated professionals explain how to best perform regular HVAC system maintenance.

You could be eligible for a federal tax credit if you installed a solar energy system in the past year. (Photo courtesy of Angie's List member Clint T. of Phoenix)
Heating & A/C

If you’ve had energy-efficient HVAC equipment installed, you could be eligible for federal or state incentives

Angie's Answers

?

No one can tell you what another contractor will charge. There is no one set price for heating and air-conditioning equipment installation. One of the major factors that affect your price is its size. No one can tell you what size equipment you’ll need without doing a load analysis on the home. That calculation essentially determines the insulation value of the home, i.e... What is the heat gain of the home, what are some other prevailing factors like room equipment, solar gain, or natural shading? You can compare prices between contractors to gauge what your cost would be between contractors, but this is a little tricky to do. Let me explain a little more. Let's say you get an installation quote of $5050.00 from contractor “A” who employs three technicians and operates two trucks. He also runs his operation from home. Contractor “B” charges $6200.00 to do the same job but has 10 employees and 5 trucks. He works out of a rental unit and offers his people a little bit better of a benefit package to recruit highly motivated workers. Everything else being equal (equipment size, SEER rating, furnace efficiency, brand name and additional material—other things that affect the price), is either one of these contractors defrauding you? No, their overhead is different. All these things play into a company’s labor rate. Just be aware of your expectations when it comes to performing any kind work in your home. If you want to pay an extremely low-inexpensive price below the average installation cost in your area then you are highly likely to get the quality of work that comes with that cost. Remember cheaper is not better!

?
The only thing of importance, is the hvac professional you choose to use. Alot of manufacturer's pieces are built relatively the same, and will last about the same amount of time. The thing that matters most is what you can not compare between companies, and that is the installation. Purchasing a system is not like purchasing a car, where no matter where you buy it, they are all the same. Each installation is different, and usually what you are paying for is the level of expertise, and quality of the installation, the company who will actual give you the warranty, and the comfort that you will receive. Manufacturers warranties disappear every day. They always have a loophole where they can get out of paying, but your local dealer wants to keep you happy for future work, and to protect his reputation in the communiy. Look up 4 year old Nordyne and Goodman warranty problems. Choose the HVAC professional first. It will cost you the least in the long run. I have had to totally redo plenty of installations that were just performed because of an uncomfortable customer, and a system that keeps breaking down. The equipment is only as good as it's installation, and over 70% are not installed correctly.
?
Yes Jupiter. It depends on the severity of the situation, is the mold encapsulated in the insulation. If yes, than replace [insulation] it with new. Is it on the casing of the heater? If yes, clean it with a mold neutralizing metal cleaner. It's not a matter of finding something or someone to clean or address the existing mold. It's a matter of finding a contractor to rectify what is causing the mold grow. It's coming from excessive moisture in the air-handler unit. I can say with 100% surety you’re dealing with poor airflow and/or incorrect equipment sizing! Either issue will cause excessive icing of the evaporator coil, which leads to excessive condensate water in the system. The condensate will eventually overflow the drain pan leaving stagnant water in the air-handler housing, which leads to mold growth. I would not let any contractor do any kind of temporary repair, add any device like a UV light or air-cleaning product until the aforementioned is corrected. I talk a lot about this in my videos and on my website. It is the result of improper system design from unqualified contractors. There is a reason why some guys cost more than others, and this is one reason why!




?
I'd rate them equal,or close,as with several other brands. I'd be more concerned about the difference in installation and service down the road. Difficult to determine the difference ,but asking for detailed info about their installation,may convince you to choose one over the other.

The Dept. of Energy states that poor installations can cause a 30% efficiency loss! Plus with Gas their are saftey issues,venting properly etc.,and of couse the need for a "low Level" Carbon Monoxide Alarm.
?
I think maybe you are confusing SEER, which is an efficiency-related rating (higher SEER means more effective use of the electric power used to compress the gas), and TONS rating, which is a measure of the total cooling power of the system. (Tons used to mean how many tons per hour of ice was used in evaporative cooling building systems - a Refrigeration or Cooling Ton equals 12,000 Btu/Hour of energy exchange. A BTU, which is another antique measure but still used, is the energy needed to change the temperature of a pound of water one degree fahrenheit. Unfortunately, because of varying humidity and evaporation, this is not readily related to house air heating or cooling without a lot of assumptions and some computations. Relating this to today's world - the Manuals BayAreaAc referred to account for all these energy conversions and determine an estimated cooling (or heating) requirement for your specific house. The type of construction, solar exposure, general climatic conditions such as average temperatures, humidity, and hottest and coldest normal ambient temperatures and desired inside temperture are all taken into account in the more sophisticated versions of the analysis, so there is no "standard", though a rough old rule of thumb was about 1 ton of cooling per 500SF of house. Obviously, this was a WAG only because it did not account for insulation, type of roofing, whether you live in Alaska or Miami, etc. The ACCA manuals do a very simplified form of evaluation to arrive at a "design", which generally will be adequate. OF course, highly precise calculations are not really needed because A/C units generally come in even ton ratings - so if you are at say 2.6 ton requirement you will be getting a 3-ton unit anyway. SEER ratings are not a direct measure of efficiency, but the relative difference between ratings gives you good idea of the unit's relative efficency in using electricity - so a 16 SEER should be about 19% more efficient (so roughly comparable lower electricity bill) than a comparably sized 13 SEER unit. 13 SEER is the lowest efficiency currently allowed to be built for general use, 19 SEER is about the highest efficiency made by pretty much all manufacturers, and about 25 SEER is the highest rated though very pricey shelf-item units, though special construction custom units can reach about 30 SEER. Note however, like any government sponsored rating, much of it is hooey when you get down to it - for instance, SEER ratings are figured based on 80 degree inside air temp and 82 degrees outside, when that is far from the normal case of mid to low seventies inside and high eighties or above outdoors. This makes the absolute SEER rating meaningless, but relative numbers still have meaning in comparing units. Note these efficiency ratings are for conventional air conditoners and heat pumps working in ambient air conditions. Ground sourced Geothermal or lake/river exchange cooling units, though initially more expensive in most cases, can greatly exceed the air-exchange unit efficiencies because they are exchanging heat with cold natural water rather than with a high-temperature outside air, and instead of continually compressing a gas are just circulating cold water. I worked on one geothermal cooling project which had almost infinite efficiency, which of course makes no sense - but the only power was for sensors and a control valve as the water flow was single-pass under gravity flow, so no power was used to circulate the water.
?
YOU.
You bought the home after an inspection that told you there were issues?
Every state has different laws regarding home purchases, contact your real estate agent to find out what remedies may apply.
THIS IS EXACTLY why you hire QUALIFIED and LICENSED contractors.

Doug
AirTekHP
CSLB# 824188 

Hvac reviews in Ft. Mitchell

D

Rating
The contractor installed the return box in what appeared to be a good installation. However, a day or two later I peered into the return (by removing the air filter grill from the wall in the hallway) and could see into the return box. It was then I noticed that the contractor had cut a square opening out of the box to align this opening to another duct, which was fine; that needed to be done. But in doing that cutting and connecting, he did not seal the exposed fiberglass material, which like loose hairs, now flap freely as the air passes by and moves through the system. There is a reason that fiberboard has a baked on sealant, to keep the particles from releasing.
When I brought the above to his attention (a few days after the install), he said he would have someone come by and apply a sealant. It took a few calls and catching him on the phone to get him to commit to the latter, but several days passed by with nobody showing up to finish the job. I called him again and said I would do it myself it he could tell me what kind of sealant (mastic) to use, as I had done some research but wasn't positive how to go about doing this, or even if I should. He said he would drop off a pail of the material, which he did.
This is not a bad company, per
Ft. Mitchell HVAC Contractors Provider Name Locked
, but it is not a good one. I had specific concerns, communicated them, and was willing to pay for work to waylay my concerns, yet the above is what I experienced. I am now contemplating having the entire box replaced with the type I originally wanted, which will cost me around $500. I could try to do the sealant application myself, but to do so would require that I purchase a special ladder (~$200 or more) to get into the return space in my wall and extend it high enough (attic height) to do the work.
If you know enough about HVAC work and have the time to watch everything this contractor does, then perhaps they might be ideal for you; but if you are an average homeowner who wants to hire a professional you can trust, this is not the contractor. I struggled to give them a C, but when I thought about the fact that they ignored my concern, a health hazard, they are lucky to get a D.
- matthew C.
A

Rating
mShowed up on time, did the work in a timely manner, explained the problem with the sensor and the impact an improperly installed sensor would have, then reworked its placement properly, suggesting that the way it was installed would eventually compromise the A/C compressor. He suggested we check the A/C system and found it to require additional freon, probably due to the improperly placed sensor, all in a timely manner.
Ft. Mitchell HVAC Contractors Provider Name Locked
was the tech and he was efficient, timely, smart and took the time to explain the problem.
Ft. Mitchell HVAC Contractors Provider Name Locked
is my new A/C-Heating R and R company. Thank you
Ft. Mitchell HVAC Contractors Provider Name Locked
.
- jordan W.
A

Rating
We called
Ft. Mitchell HVAC Contractors Provider Name Locked
and
Ft. Mitchell HVAC Contractors Provider Name Locked
on a Sunday,
Ft. Mitchell HVAC Contractors Provider Name Locked
came to our house right away, and started to fix the problem, it was the coldest day of the winter, we were very worried,
Ft. Mitchell HVAC Contractors Provider Name Locked
has tried very hard to repair the heater, getting the replaced parts, he is very friendly and professional, he is very good at what he does, he has identified the problem right away, after getting all the needed part, he has fixed the problem and explained to us clearly what was wrong with our heater. I am very impressed by
Ft. Mitchell HVAC Contractors Provider Name Locked
and
Ft. Mitchell HVAC Contractors Provider Name Locked
, they are good people.
- qing H.
A

Rating
The work went far better than it would have with a technician less capable. All work was done according to schedule, in a timely manner, and
Ft. Mitchell HVAC Contractors Provider Name Locked
was always very professional. He was willing to spend at least 2 hours without charge to explain to me the nature and extent of the problem, what would be needed to fix it, and how it would be fixed. This winter I had an unrelated problem in one of the units and called
Ft. Mitchell HVAC Contractors Provider Name Locked
to check it out. I found out THEY WERE NO LONGER PROVIDING RESIDENTIAL SERVICES and received a referral to another provider..
- Joanne S.
A

Rating
The work
Ft. Mitchell HVAC Contractors Provider Name Locked
did on the air conditioner took care of the problem and it's worked fine ever since. For the heating issue, I may not be able to tell if the steps
Ft. Mitchell HVAC Contractors Provider Name Locked
gave me will work, but I think they will. He described exactly what he thought was happening and described other incidents that matched my problem. I appreciated the time he took to listen and try to diagnose what was going on.
- Susan S.
A

Rating
Tried to have my usual service install the thermostat without success. Looked up a installer on
Ft. Mitchell HVAC Contractors Provider Name Locked
website and picked from top rated Angie's List company.
Ft. Mitchell HVAC Contractors Provider Name Locked
was on time, looked at my system and had everything running in 30 minutes.
- Donald G.
A

Rating
Ft. Mitchell HVAC Contractors Provider Name Locked
showed up when he said he would and performed the job nearly and quickly. I can tell that he takes the time to
Ft. Mitchell HVAC Contractors Provider Name Locked
out a job so that it works well AND looks good. The price he quoted is the price we paid, and I felt good about it. Definitley high-quality workmanship. With plumbers, I strongly believe that you get what you pay for.
- Geri C.
A

Rating
My first interaction with
Ft. Mitchell HVAC Contractors Provider Name Locked
was when my furnace went out on a Saturday morning after Christmas. The group that reqularly serviced
Ft. Mitchell HVAC Contractors Provider Name Locked
could NOT be found. I called emergency numbers, went to the facility. I found
Ft. Mitchell HVAC Contractors Provider Name Locked
in the phone book and
Ft. Mitchell HVAC Contractors Provider Name Locked
came right out.
Of course we called them when we replaced
Ft. Mitchell HVAC Contractors Provider Name Locked
. He came out and spent alot of time with me and my dad answering questions. I have had no problems with the funrace or service since. This was one of the best moves I made.
- Judith M.

All HVAC Contractors in Ft. Mitchell, KY

Companies below are listed in alphabetical order. To view top rated service providers along with reviews and ratings, Join Angie's List Now!

A Cress Heating & Cooling

6163 East Bend Rd.
Burlington

A&B Heating & Air Conditioning

5632 Commercial Dr
Burlington

AAMCO Transmissions

7458 Montgomery Rd

ACE Contracting

4581 Trenton oxford rd

ACHS Services

9762 Baughman Rd

ACTION HEATING & AIR INC

14 VIRGINIA AVE
Ft Mitchell

AIR RUSH

157 Indian Creek Dr
Ft Mitchell

ALLSTATES MECHANICAL

1850 BULLOCK PEN RD
Ft Mitchell

AppliancePartsPros.com

16501 Ventura Blvd Ste 500

Armor Home Services LLC

7936 Tanners Gate Ln
Florence

Arronco Comfort Air Inc

5578 Limaburg Rd
Burlington

BAKER BAUER & FISH

3210 SPRING GROVE AVE

BC ELECTRIC

114 W 12th St
Covington

Bell Heating, Cooling, Electric and Remodeling

5571 Limaburg Creek Rd
Florence

BENKE HEATING & AIR COND

41 MARIAN DR
Fort Thomas

Birkley Services

30 Riverview Ave
Fort Thomas

Bishop Heating & Cooling

2192 Beech Wood Dr

Bob Fish Plumbing LLC

1157 Eads Rd
Verona

BOB'S HEATING & AIR INC

2297 PETERSBURG RD
Hebron

BRAUN HEATING & AIR COND

10371 COLERAIN AVE

Bright Comfort Air & Electric

2897 Harrison Brookville Rd

BROTHER BILL'S HEATING

14474 MADISON PIKE
Morning View

BROWN TV & APPLIANCES

107 W 11TH ST
Newport

Dash Home Improvement

24937 Pleasant Trail

DAWSON HEATING & AIR COND

7747 STILLWELL RD

Day's Appliance Repair Co

8435 Beechmont Ave

Demi Remodeling

12088 US 42
Walton

DESIGN COMFORT INC

941 DUDLEY PIKE
Ft Mitchell

DKM MECHANICAL LLC

6315 BELFAST RD

DUCTZ of Fairfield/Mason

5483 Lake Michigan Dr.

DURBIN HEATING & COOLING

2463 COUNTRYTRACE CT

EcoEnvironments

3295 Montgomery Rd

EDGE HVAC

21 INDIAN HILL DRIVE
Crittenden

EMOTIV

3883 MARBURG AVE

EQS Mechnical

4024 East Miami River Road

flanigan contractors inc.

1869 Mt Vernon Dr
Covington

FLECK'S HEATING & AIR COND

531 DUDLEY PIKE
Ft Mitchell

Flow Rite Plumbing

653 Arlington Ave

Fort Mitchell Garage

1420 Dixie Hwy
Park Hills

Four Seasons

3715 Todds Run Rd

FRED'S CONSTRUCTION CO

5570 MONTGOMERY RD

Geiler Home Services

6561 Glenway Ave

Goller Heating & Cooling

5246 Parkview Ave # 1

Greater Cincinnati Energy Alliance

200 W. 4th Street, Suite 600

Greenergy Professional Services LLC

1050 Arbor Tech Drive
Hebron

Greg's Affordable Car Repair

7851 Tanners Ln
Florence

Guthier Heating & Cooling

6565 Four Mile Rd
Melbourne

H & H Heating & Cooling

225 E 8TH ST
Newport

Hunny-Do Services LLC

6924 Bridgetown Rd

HVAC Cincinnati

407 Vine St

HVAC Doctors

2617 Aerial Ave

Independence Mechanical

11939 Taylor Mill Road
Independence

J and S Mechanical

190 Lakeview Dr
Florence

J&M Painting/Remodeling

2573 Westpoint Ct.
Burlington

Jc Johnson mechanical

638 hidden pine way
Ft Mitchell

JEFFERSON HEATING AIR INC

5013 MURPHYSVILLE RD
Maysville

JJ'S PLUMBING & AIR

Lone Oak Dr
Latonia

JM Mechanical

4930 Provident Dr.

JOHN W SEARS INC

514 WYOMING AVE

Johnson Family Heating & Cooling

1730 Jefferson Ave
Covington

JonLe Heating-Cooling

4117 Bridgetown Rd

JZ Heating And Cooling

2803 Morningridge Dr

Kenny's Crane Service

3834 Roundbottom Rd

KIEFER HEATING & AIR CONDTG

707 COVERT RUN PIKE
Bellevue

Knight Heating-Cooling

137 Wellington Dr
Florence

Knochelmann Service Experts

533 Pike Street
Covington

LHIRTH CONSTRUCTION

7700 MILLIKIN RD

LOWE'S

6150 HARRISON AVE

Lowe's - Highland Heights

2369 Alexandria Pike
Newport

Lykins Energy Solutions

5163 Wolfpen Pleasant Hill Road

M&E Services

P. O. Box 811

Mark Metzner's Heating & Air Conditioning

14 Cliffview Ave
Fort Thomas

McIntosh's Pro Clean

8282 south butter st

Midas Cincinnati

5105 Delhi Ave

MORGAN MECHANICAL HTG & AIR

107 DUDLEY PIKE
Ft Mitchell

MORRIS HEATING & COOLING

1467 PRODUCTION DR
Burlington

Murden Technical Service

8 Edwin Ct
Latonia

Murtland's HVAC

4579 Matson Ave

Penklor Construction

1329 E Kemper Rd Ste 4212

PERFECT AIR LLC

3979 Prescot Ct

PERFECT CLIMATE LLC

817 Eastland Dr
Ft Mitchell

Phoenix Comfort Systems, LLC

7410 US HWY 42
Florence

Poston Brothers LLC

2901 Washington St.
Burlington

Powering Profits

9940 Mt. Nebo Road

RASH-SAVILLE-CRAWFORD INC

147 E MCMICKEN AVE

RECKER & BOERGER INC

10115 TRANSPORTATION WAY

RepairClinic.com Inc

48600 Michigan Ave

ResCom360

7025 Harrison Avenue

Reupert Heating & Air

5137 Crookshank Rd.

Revolution Remodeling

3189 Princeton Rd

Richardson Plumbing

8 Obliqu St
Florence

Richwood Auto Service Center

385 Mount Zion Rd
Florence

RIDGE REFRIGERATION

57 W SOUTHGATE AVE
Fort Thomas

Rusk Heating & Cooling Inc

666 W 3rd St
Covington

Sacko Air

7700 Harrison Ave

Sacko Air Mechanical

4333 Mayhew Ave.

Sameday Handyman

2331 Anderson Road
Ft Mitchell

Samuels Heating & Air LLC

1586 Battery cir
Hebron

Staley Transformations

1620 Oregonia Rd

Steve Cain's All Vacuum Center

2446 ANDERSON RD
Ft Mitchell

Steve’s Heating And Cooling

5765 Constitution Dr
Florence

Sturgis Plumbing Co

3816 Montgomery Rd

Sure Comfort Supply

1230 Kennestone Cir Ste 100

Tarvin Plumbing

3749 Eastern Ave.

Taylor Air Htg & A/C

3137 Clifford Ave
Latonia

TC HEATING & COOLING

480 RIDGEVIEW DR
Erlanger

TDZ CONSTRUCTION

44 Wolfer Dr

TEEGARDEN HVAC

936 KENTON STATION RD
Alexandria

The Service Pros

407 Northland Blvd

WARMLY YOURS

1400 E LAKE COOK RD

Warmzone

12637 S 265 W Suite 100

Wegman Heating Co

10500 Chester Rd

Western Hills Heating A/C & Geothermal

242 Harrison Brookville Rd

WORLY PLUMBING SUPPLY

400 GREENLAWN AVE

Wyoming Air LLC

9812 Springfield Pike

Zimmer Heating & Cooling

7458 Colerain Ave

Shop Local Hvac Services in Ft. Mitchell, KY

Join Angie's List to get the best local reviews in Ft. Mitchell.

What Does My Membership Include?
  • Instant access to reviews for 700+ services
  • Exclusive service discounts - up to 70 percent off!
  • Top-notch support from our live call center
How does Angie's List work?
1. Say you need a Heating Repair
2. Angie's List has tons of detailed, local reviews.
3. Find a winner, and book them.
4. Angie's List is there to resolve any issues.
CBS
Good Morning America
Fox News
USA Today
The Wall Street Journal
MSN money