-Find top-rated Service Providers

Find Top-Rated Ocklawaha Metal Fabricators

Angie's List helps you hire the best - and avoid the rest!

Metal Fabricators to Avoid

15

Top Rated Metal Fabricators

2

Prevent buyer's remorse with us

  • Over 3 million people trust Angie's List to help make the right choice
  • Be informed to avoid costly mistakes
  • Shop with us to ensure a fair price
  • Our complaint resolution team will help if a project goes bad
+See Verified Local Reviews

Over 390 reviews for
Ocklawaha Metal Fabricators from people just like you.

A
" From the get go these people performed. The estimate came in a little high but they met my lowest bid plus $20.
was very personable" and even qualified the project by saying he would come and personally do the job. He was right and he done a good job! The workmanship and professionalism are second to none. Their schedule for all the work was on time and delivered with a smile. I met
, the owner also and he was clean cut and friendly. I thanked him for a really good deal and he thanked me for the work. I am very happy with Ultimate Fence and will enjoy my new fence for years to come. I recommend this company for any fencing needs you may have.

-Andrew M.

A
"
did an amazing job. He is courteous, professional, and extremely responsive. He had the plate cut perfectly and finished to match our existing" appliances and the
. He is a great guy and very good at his job. Cannot recommend him highly enough.

-ALEX B.

+Join 2 Million People on Angie's List

Over 2 million people trust Angie's List.

  • Your Membership Includes:
  • Instant access to top rated businesses covering 700+ services
  • Our Complaint Resolution Team to help when a project goes bad
  • On-the-go access to our iPhone, Android, & iPad apps
Find top-rated Service Providers
See Verified Local Reviews
Join 2 Million People on Angie's List

Local Articles in Ocklawaha

Angie's List
Alarms, Handymen, Hardware & Home Improvement Stores, Heating & A/C, Metal Fabrication & Restoration

An upsurge in the market price for aluminum and copper is driving an unusual crime wave in neighborhoods across America. Scrap metal thieves are stripping aluminum siding and gutters from houses and even copper coils from air conditioning units.

Angie's List
Fencing, Fencing & Driveway Gates, Metal Fabrication & Restoration, Wrought Iron

Minneapolis man specializes in custom wrought iron railing. Old-world craftsmanship adds flair to fence, stair and balcony projects and lends architectural element to interior design.

Angie's Answers

?
?
?
?
?

Metal Fabrication reviews in Ocklawaha

A

Rating
From start to finish
Ocklawaha Metal Fabricators Provider Name Locked
and his crew were professional, knowledgable and personable. They built and installed a gorgeous boat lift cover for us and at a great price. We couldn't be happier. If you're thinking of getting a boat lift cover, don't hesitate to use
Ocklawaha Metal Fabricators Provider Name Locked
!!
- James F.
F

Rating
called for an estimate, incredibly rude. i guess work is so abundant now that he may not care about future customers.
- brian C.
F

Rating
I can not in good conscience recommend this company and would highly state: BUYER BEWARE ! ! ! I began looking for a company that could provide a rebuilt cylinder head for my 2001 Ford F150 truck, as a result of my local mechanic not having luck finding any local shops in Texas having one available. I found
Ocklawaha Metal Fabricators Provider Name Locked
Head as a result of a GOOGLE
Ocklawaha Metal Fabricators Provider Name Locked
. I contacted
Ocklawaha Metal Fabricators Provider Name Locked
at
Ocklawaha Metal Fabricators Provider Name Locked
and he made it sound like this would be doable however he was not sure that he actually had a cylinder head available and that this could take a few days extra to locate. I made arrangements for
Ocklawaha Metal Fabricators Provider Name Locked
to contact my mechanic and discuss the details of finding the correct cylinder head based on a stamped marking on the old head. After some time and repeated calls between myself,
Ocklawaha Metal Fabricators Provider Name Locked
, and my mechanic, we finally found the correct number and the rebuilt head was ordered. IT took two weeks for
Ocklawaha Metal Fabricators Provider Name Locked
and my mechanic to finally call each other (after repeated calls from me to both) to get them to discuss what I needed. When the rebuilt head arrived, my mechanic placed it on the engine according to specs and found that the rocker arms would not stay on when the engine was started....and that the engine ran extremely badly. After repeated calls between
Ocklawaha Metal Fabricators Provider Name Locked
and my mechanic,
Ocklawaha Metal Fabricators Provider Name Locked
sent out rocker arm assembly for a 2005 Ford F150 (which were NOT the correct parts). I am still not sure where the miscommunication came from since
Ocklawaha Metal Fabricators Provider Name Locked
knew exactly what head they sent us in the first place. This back and forth activity ended up taking 3 weeks and I finally got frustrated and told my mechanic to remove the bad head and return it and all the parts and to send it back to
Ocklawaha Metal Fabricators Provider Name Locked
(after getting the RMA from
Ocklawaha Metal Fabricators Provider Name Locked
). I ended up buying a new head directly from the local FORD dealer and asking my mechanic to install it. This caused me to have to pay an additional $1200 to my mechanic; the cost to install the rebuilt head from
Ocklawaha Metal Fabricators Provider Name Locked
and then to remove it and send it back to
Ocklawaha Metal Fabricators Provider Name Locked
. I had to pay $1200 to have the original head removed and the new one from FORD installed.)
Ocklawaha Metal Fabricators Provider Name Locked
Head received the bad head and after repeated calls,
Ocklawaha Metal Fabricators Provider Name Locked
finally told me that they found that the head was fine and the reason for the rocker arm assembly falling out was because the valves were bent. "Bent Valves are usually caused as a result of installing the head incorrectly on the engine block". I contacted my mechanic and advised them of what
Ocklawaha Metal Fabricators Provider Name Locked
findings were and their response was that there was NO installation problem on their end - they follow the FORD shop manual exactly as shown, including the installation of the NEW head from FORD, which had they had NO issues with. SO,
Ocklawaha Metal Fabricators Provider Name Locked
says it was installed incorrectly. My Mechanic says it was sent to them that way.... a pointing of fingers with neither side admitting guilt.
Ocklawaha Metal Fabricators Provider Name Locked
stated that they will not REFUND any of the costs to install and remove the head that they provided and that If I wanted a refund on the head that they provided, I would have to pay them a $100.00 restocking fee. I asked
Ocklawaha Metal Fabricators Provider Name Locked
to further discuss with the owner and ask that they reconsider a partial payment for the work to remove and return the bad head and to provide a full refund on the bad head provided.
Ocklawaha Metal Fabricators Provider Name Locked
said he would do so and would get back to me soon. As of this writing, more than a month has gone by with NO refund provided and NO notification of any further action on their so called GUARANTEE. I can not in good conscience recommend this company and would highly state: BUYER BEWARE ! ! ! Lesson learned on my part is NEVER get between the Mechanic and wherever they get their parts from.




- Roy H.
F

Rating
Doesn't have a full crew for the job and often doesn't show up to work as promised. Paid nearly 70% of the contract but only 50% of the work was completed two months ago. Project should have taken 2 months to complete entirely and it's been 5 months and only half complete. Charged (and was paid) for an upgraded stucco system and continues to substitute inferior products. Used unlicensed employee to complete electrical work. Leaving exposed wires in the walls, and closing said wall. Attempted to blame another subcontractor, and discourage us from having a licensed electrician investigate thoroughly by assuring the work had been completed properly. Moved forward with a licensed electrician to investigate and repair. Upon doing so, multiple code violations including live wires were found. Working with this vendor has been terribly frustrating to say the least.
- Paulette M.
A

Rating
They used enamel paint and I was able to choose from 10 colors. They look brand new and beautiful. He did a fabulous job. I?m sorry that I
Ocklawaha Metal Fabricators Provider Name Locked
?t have more work for him. He was very kind, courteous and had a lot of insight and suggestions.
- Nancy D.
D

Rating
The railing went in fine. They even fixed one area that needed work but after they received their final payment things changed. Over the winter one of the support posts began to rust. This happened because it had not been welded correctly. A gap developed and rust leaked down the post and stained the blocks on our new front porch.
I called
Ocklawaha Metal Fabricators Provider Name Locked
probably 8 times and three times he assured me he would be out with a crew to repair this problem. He has never showed up. I also called the main office to get help on this.
Ocklawaha Metal Fabricators Provider Name Locked
assured me that a crew would be out to fix things but again, no crew and no phone call to let me know that they weren't coming. Their customer service is a joke. don't waste your money with this outfit!
- Mark K.
N

Rating
The work was completed in a timely manner with professionalism and workmanship. The costs are below average compared to other contractors. The business in located in Glendale and the center of the
Ocklawaha Metal Fabricators Provider Name Locked
Metro area. We continue to use this contractor for upcoming projects.
- B W.
A

Rating
Ocklawaha Metal Fabricators Provider Name Locked
was neat and clean on the job site. Nice fat connections made between my deck railings as they were reconnected to each other. These railings are for safety - work seems excellent.
- SARA ANN B.

Metal Fabricators in Ocklawaha, FL

Companies below are listed in alphabetical order. To view top rated service providers along with reviews and ratings, Join Angie's List Now!

Big D Residential Roofing Inc

4390 NE 35th St
Ocala

Classic Copper Works

9337 Spring Cypress Rd

Comfort Temp Company

7050 NW 23rd Way
Gainesville

Dowling Signs of North Central Florida

2834 N MAIN ST
Gainesville

Ground Zero Storm Shelters

4600 Independence Rd

Hercules Fence Co Inc

4660 SE Maricamp Rd
Ocala

Jimerico Construction Inc

8505 Justice Pl
Groveland

Lord General Contractors Corporation

Post Office Box 99
Indian Rocks Beach

Mark Hurm & Co LLC

3411 N Main Terrace
Gainesville

Ofab, Inc

1909 NE 25th Ave
Ocala

Solarshield Industries Inc

4441 SE 53rd Ave
Ocala

Spin-Well Fabrication

306 E State Rd 60
Plant City

ST CLAIR MACHINE

9280 SE HIGHWAY 314A
Ocklawaha

Stewarts Welding

9229 e river bluff ct
Inverness

Join Angie's List to get the best local reviews in Ocklawaha.

What Does My Membership Include?
  • Instant access to reviews for 700+ services
  • Exclusive service discounts - up to 70 percent off!
  • Top-notch support from our live call center
How does Angie's List work?
1. Say you need a Metal Fabricator
2. Angie's List has tons of detailed, local reviews.
3. Find a winner, and book them.
4. Angie's List is there to resolve any issues.
CBS
Good Morning America
Fox News
USA Today
The Wall Street Journal
MSN money