See how this homeowner achieved a high-end finish for a high-in-the-air project
Find Top-Rated Needles Deck Builders
Angie's List helps you hire the best - and avoid the rest!
Deck Builders to Avoid
Top Rated Deck Builders
Prevent buyer's remorse with us
- Only 40% of Needles Deck Builders are reliable
- Tardiness is the #1 complaint against Needles Deck Builders
- Shop with us to ensure a fair price
- Our complaint resolution team will help if a project goes bad
Over 175 reviews for
Needles Deck Builders from people just like you.
Over 2 million people trust Angie's List.
- Your Membership Includes:
- Instant access to top rated businesses covering 700+ services
- Our Complaint Resolution Team to help when a project goes bad
- On-the-go access to our iPhone, Android, & iPad apps
Access to trusted reviews, the best Deck Builders and exclusive discounts!
Real Member ReviewsMemberships allow Angie’s List to certify that all reviews are real reviews from real members—no fake, bogus, or anonymous reviews here!
DealsAngie’s List is a Community that you’ll use time after time. Research who to hire, learn tips and tricks, and consult with your neighbors
Instant Community AccessMembers can choose from tons of deals and discounts for projects they need to do, like 30% off exterior home painting!
Complaint ResolutionIf a project goes badly, Angie’s List has a complaint resolution team standing by to help you.
Local Articles in Needles
Is it OK to leave snow sitting on your deck all winter? Here's how to prevent damaging your wood or composite deck with proper preparation and maintenance.
Contractors say homeowners with this trait are the most satisfied with home improvement projects.
The old fixtures we replaced were nothing to write home about, and as a result, this simple swap has made all the difference. With Scott as my hand model, we’ll show you how to install an exterior light in no time!
I agree with Jim Casper - after about 50 years of dealing with weathered wood finishing both in my homes and in the construction business, it comes down to about 90% preparation, 10% the finishing. If you do not prep the wood right, any moisture, mold, etc in the wood will destroy whatever you put over it.
High-build finishes like paint and epoxies and, from reading the Rustoleum flyer on this new product that too, work by trying to make an impenetrable surface and depend on a very good bond with the surface, AND no water getting under them. Because they are thick and are designed to provide a waterproof surface, unfortunately where water gets under them they are just as good or better at keeping it from evaporating, so you get fungal growth, blistering, and peeling.
Unfortunately, on deck and most outdoor applications except siding the surface will get nicked, scratched and otherwise develop leaks in short order. Water will therefore get into the underlying wood, and because it entered through small cracks and scratches, does not have any airflow to make it evaporate, so it sits there and breaks the finish bond to the wood (causing peeling and blisters), and promotes decay. That is why new deck boards and siding and trim that have been heavily or multi-coat painted on all 4 sides, thinking that will give the best protection, only last a few years versus the usual 10-20 years or so for boards that are painted top and sides only.
The full sun and hot conditions will, of course, cause more thann normal heating of dark colored painted decking. I had one instance where I was doing an independent appraisal of a very large commercial deck at a government facility, and in 85-90 degree daytime temps, in the sushine the chocolate brown deck surface temp was 150 degrees, and the paint was softening so much it stuck to the bottom of your shoes a couple of months after application.
As Jim said, the studies pretty clearly show that a breathable penetrating stain gives the best life, after plain ACA/CCA (copper chromium variations - the green stuff) treated wood. Penetrating stains, properly applied, do NOT seal in the moisture, they inhibit its entry and (when dark colored) help protect against sun damage to the wood and finish, but still breathe enough to let moisture escape on dry days. For my money, I will only use petroleum distillate (paint thinner cleanup) products, as they penetrate into the wood much better. Water based ones immediately start swelling the wood pores, so it blocks further penetration of the stain, which while cleanup is a bit easier, totally defeats the purpose of a PENETRATING stain or sealer.
I would recommend against any sort of waterproofing sealer, as they trap the water just like paint, and I have never seen one that is effective for 2 years.
My personal preference, though it limits the architectural coloration possibilities, is ground-contact rated copper compound treated wood (NOT the Wolmanized brown product), which comes green initially but can be retreated with either green or brown solution or can be liquid colorized darker (though not easily to a specific tone) using either of those as a base. My practice is to redo the treatment before installation to ensure thorough treatment, as from the mill it commonly has skips where boards contacted each other or where stacking seperators laid on it, and the ends are commonly very poorly done. This is done after cutting to length, as cut ends have to be retreated anyway. A simple short deck cleaner soak followed by a light pressure washing and brush or roller re-treating of ONLY the TOP surface every 10 years or so has, for me, reduced visible weathering of the boards and beams to negligible.
The product has evolved considerably since the lawsuit.
I would still do your own research and give you contractor your feedback. At the end of the day, the cost for whatever board you want will be similar.
That being said, a legitimate contractor still has operating cost which vary by area and how they run their business. I break even at $150/day not including labor and materials so I've got to charge more than that to make money. To keep the math simple, if I'm paying $250 for a pne day job in labor plus another $300 in materials and $150 operating costs I've got to charge $700 to the customer to break even. That's if I'm only doing one job a day which is why most of us manage several at a time. The point I'm trying to make is that someone with the necessary knowledge and experience to build you a safe deck is not going to be cheap. Knowledge accompanies success which costs money.
I've repaired or restructured several decks built by handymen who should find another profession. Ask yourself this question when hiring someone for this project: Would I trust this person to build my house? If the answer is no you need to find someone else. The deck is just as important. It's where your family, friends, kids are going to gather and interact. If it isn't structurally sound it can collapse causing injury or even death. One last word on decks: Always screw a deck together, don't nail it.
Todd's Home Services
San Antonio, TX
Deck Building reviews in Needles
discount, for work done during the winter (his slow season) on a when-available basis. I accepted this, and was a little surprised that it delayed the job by two months. It must be a good thing for them to have that much work in their slow season! The delay wasn't a problem - we don't have a lot of use for the deck in December and January - and once they started the job, they worked at it (even through a brief snowstorm!) until it was finished. The whole job was done in three days - one to demolish the old deck and two to build the new one.
As I mentioned, the new deck is beautiful. We couldn't be more pleased.
All Deck Builders in Needles, CA
Join Angie's List to get the best local reviews in Needles.
- Instant access to reviews for 700+ services
- Exclusive service discounts - up to 70 percent off!
- Top-notch support from our live call center