-Find top-rated Service Providers

Find Top-Rated Georgetown Insulation Contractors

Angie's List helps you hire the best - and avoid the rest!

Insulation Contractors to Avoid

86

Top Rated Insulation Contractors

43

Prevent buyer's remorse with us

  • Only 33% of Georgetown Insulation Contractors are reliable
  • Tardiness is the #1 complaint against Georgetown Insulation Contractors
  • Shop with us to ensure a fair price
  • Our complaint resolution team will help if a project goes bad
+See Verified Local Reviews

Over 6,998 reviews for
Georgetown Insulation Contractors from people just like you.

A
"Hot and Cold water pipes insulated in the
. This company performs a 10Pt.
inspection for mold, fungi, termites," structure damage and vents. As a victim of Super Storm Sandy, I needed mold remediation both in the
and garage....after meeting with many companies I chose
.
the owner was very clear as to what he felt needed to be done and provided in writing each service and cost for each...not all lumped together as most vendors presented.
's prices were not the cheapest but they were very reasonable and comparable to other vendors. The remediation had to be done quickly and
made sure he provided all services timely and very professionally. He provides pictures of before and after for all his work another excellent service. As a retired, single women, it's very comforting having a reputable company to work with and an owner that responds immediately. I would highly recommend this company to all of your subscribers with absolutely no reservations.

-Bernadette R.

A
"Very straightforward and easy to deal with. They were ready to go when we needed them, and they did the job fast. The price was excellent as well. We would recommend and use again.

-David R.

+Shop, Schedule, and Save on Services

Shop, Search and Save from anywhere!

  • Offers are exclusively provided by highly rated companies
  • Angie’s List members have access to exclusive discounts on local services
  • Shop, schedule, and stay on top of progress from any device
  • Our 30 Day Refund Guarantee means you can buy with confidence!
+Join 2 Million People on Angie's List

Over 2 million people trust Angie's List.

  • Your Membership Includes:
  • Instant access to top rated businesses covering 700+ services
  • Our Complaint Resolution Team to help when a project goes bad
  • On-the-go access to our iPhone, Android, & iPad apps
Find top-rated Service Providers
See Verified Local Reviews
Shop, Schedule, and Save on Services
Join 2 Million People on Angie's List

Local Articles in Georgetown

snowy house

The Angie's List Guide to Winter Maintenance

It's the time of year when the winter weather can take a toll. Follow this winter maintenance checklist to protect your home, your car and your health.

Without proper insulation and venting in your attic, icicles can form on your eaves, leading to a damaging ice dam on your roof, says Neubecker. (Photo courtesy of Angie's List member Donna B. of Mendota Heights, Minn.)

Avoid ice dams with proper attic insulation

Do you have icicles forming on your eaves and gutters and ice collecting on your roof? An ice dam can cause serious problems without proper insulation.

Even in cold-weather climates, homes often lack insulation between the finished, occupied portion of the home and the ground. (Photo courtesy of Angie's List member Paul B. of Bluffton, South Carolina)
Insulation, Energy Efficiency Auditing

Exterior foundation insulation is an often overlooked home improvement. It can help stop drafts, lower energy bills and keep your house warmer during winter.

Angie's List
Appraisals - Real Estate, Architects & Building Design, Basement Waterproofing, Bathtub Refinishing & Liners, Biohazard Remediation, Builders - Garages/Barns/Sheds, Builders - Homes, Cabinet Making, Cabinet Refacing/Restoration, Carpentry - Unfinished, Carpentry - Woodworking, Carpet Sales/Installation/Repair, Chimney Caps, Chimney Repair, Chimney Sweep, Closets, Concrete - Leveling/Mudjacking, Concrete - Pouring & Repair, Concrete - Stamped & Decorative, Countertops, Deck Maintenance, Decks & Porches, Delivery Service, Dock Building & Repair, Doors, Drywall, Dumpster Service, Electrical, Epoxy Flooring, Excavating, Fireplaces, Floor Cleaning/Polishing/Waxing, Flooring Sales/Installation/Repair, Foundation Repair, Fountains, Garage Doors, Glass & Mirrors, Glass Block, Gutter Cleaning, Gutter Repair & Replacement, Handymen, Hardwood Flooring Sales/Installation/Refinishing, Hauling, Heating & A/C, Home Automation, Hurricane Shutters, Insulation, Land Surveying, Landscaping, Landscaping - Hardscaping & Pavers, Landscaping - Lakefront, Landscaping & Lighting, Lawn & Yard Work, Lawn Fertilization & Treatment, Lawn Irrigation, Lead Testing & Removal, Marble & Granite, Masonry, Mold Testing & Remediation, Moving, Painting - Exterior, Painting - Interior, Pest Control/Exterminating, Plumbing, Plumbing - Drain Cleaning, Pressure Washing, Radon Detection & Reduction, Remodeling - Basements, Remodeling - General, Remodeling - Kitchen & Bathroom, Remodeling - Modular & Mobile Home, Remodeling - Sunrooms & Patio Enclosures, Roof Cleaning, Roof Ice/Snow Removal, Roofing, Screen Repair, Septic Tank, Sewer Cleaning, Siding, Skylights, Stone & Gravel, Structural Engineering, Stucco, Tree Service, TV Service - Cable, TV Service - Satellite, Wallpaper Removal, Wallpapering, Window Cleaning, Window Tinting, Window Treatments, Windows, Windows - Egress, Windows - Safety & Security Film, Wrought Iron

Contractors say homeowners with this trait are the most satisfied with home improvement projects.

With insulation technology always advancing, you’ve got choices to make when it comes to the material you pick, says Lindus. (Photo courtesy of Angie's List member Lynn M. of Columbus, Georgia)
Insulation

Thinking of installing your own insulation? One highly rated provider shares six things that every homeowner should be aware of before attempting to DIY.

Before winter arrives, ensure your attic is sealed properly and has both adequate insulation and ventilation. (Photo courtesy of member Kitty Jones of Columbus, Ohio)
Insulation, Heating & A/C, Roofing

A comfortable, energy efficient home starts at the top. Those hot spots and cold rooms may relate to problems in your attic. Beyond adding insulation, what's a homeowner to do?

Angie's Answers

?

Google and read about it. Some people swear by it, though their comments sound suspiciously like they were all written by the same person. Some call it a rip off - expecially people paying $6000-8000 for what would normally be a $1,000 range job.

I would not call it an outright fraud as they are providing a product that has some potential merit in the right application, but from a technical standpoint it sounds suspicious. They claim a 1/4 mat with doiuble sided foil facing is R-16 insulation. This at least is deceptive - they appear to be saying its radiant heat reflective properties give the equivalent of R-16 insulation, because there is NO WAY 1/4" foam is going to yield R-16 in an ASTM test for insulation, which is a thermal conductivity test. Would be lucky to get R-2 or so as an insulator, so this is basically a radiant barrier. Competing products from national brandname manufacturers list R value of 3.8-4.2 for one inch mats, so the equivalent for this 1/4" mat would be expected to be in the R1 range.

Properly installed, with ventilation on BOTH sides, it can be slightly effective in reducing radiant heat loss from the house, and more effective in reflecting heat in the attic from coming down into the house. However, from a thermodynamic and vapor control standpoint, they are trouble unless their integration into the house envelope is designed VERY carefully. Short explanation:

1) for keeping heat in the house, if they are installed above the attic floor insulation they can slightly limit air loss through the ceiling, and reflect radiant heat back down, resulting in warmer insulation, hence a warmer ceiling - but not as marked an improvement as added insulation would give.

2) for keeping attic heat from getting into the ceiling, they do reflect back a good portion of the radiant heat coming from the roof sheathing. This reduces the attic floor insulation surface temperature, so can reduce air conditioning cost. it does increase teh temperature in the attic, which can be very bad for support timbers and the roof sheathing.

3) the worst thing about how this type of foil radiant barrier is used is that, unless it has free air space on both sides, it acts as a vapor barrier. In the typicall application as a blanket over attic floor insulation, it traps any moisture coming up from the house, and can cause mildew and rot, especially in climates where the outdoor temperature gets quite cold.

4) the attic fans are generally a last resort measure - the normal house does much better, at no energy cost, using ridge vents with adequate eave openings to provide ventilation and cooling in the attic.

5) their effectiveness in winter heat diminshes rapidly with time - tests of attic radiant barriers show they lose about half their effectvieness within 5 years, because even a light dust coating greatly reduces their ability to reflect radiant heat, and greatly increases the absorption of heat from the hot air above them.

6) pay attention to cost - from what I see, their installed cost is many times the cost of normal insualtion or radiant barrier placement.

I would say, in summary, buyer beware, and I would be inherently leery of a product being sold the same way timeshares and "secret" moneymaking schemes are.

?

Obviously this is not a timely response to the initial question. However, for those who may be reading these answers at a later time, a couple of added thoughts:

1) the radiant barrier being discussed is basically heavy-duty metal foil or metallized surface on a plastic sheet, intended to reflect RADIATED heat (infrared radiation - think heat light, or heat you can feel at a distance radiated from a fireplace), the same way a mirror reflects light. Radiated heat is how a standard oven broils and how steam and hot water baseboard heat predominately work.

2) you generally should do NOT place a radiant barrier over the insulation that lies between and over the joists in a normal attic, especially in a region where the attic temperature can frequently reach condensation temperature (below about 45-50 degrees) - it may reflect back some of the house heat that is coming up from the house, but by destroying most of the temperature gradient from the house to the attic air destroys much of the driving force that moves moisture to the attic air and subsequent venting. Between that greater heat and the fact the barrier is also a moisture barrier, that makes a perfect condition for mold and rot in your insulation and attic wood, and has become quite an issue in energy upgraded homes because of retrofits that cut off airflow outside the insulation, but do not cut off the moisture source leaking thorough from the house. The proper and ONLY place for a vapor barrier in a normal attic insulation system is on the pressurized and normal warm, humid side of the insulation zone - directly above the ceiling drywall in the top floor, fastened to the UNDERSIDE of the ceiling joists or trusses, NOT anywhere above that. Perforated barriers are supposed to reduce this tendency, but the perforation area percentage is so small that typically they still act as a vapor varrier, just not a totally effective one.

3) radiant barriers reflect radiated heat ewith up to 99% efficiency but have basically zero resistance to CONDUCTION (body to body heat transfer at points of contact - think heat transfer from your warm hand to a frozen cold drink can, or hot pavement heat transfer to the bottom of your feet) - so there needs to be an air gap between the radiant barrier and the hot item passing the heat to it, otherwise the heat will just pass through it by conduction. Therefore, applying it directly to the sheathing (above or below) or manufacturing it directly on the surface of the sheathing defeats its purpose, even though this is commonly done.

4) there is a lot of discussion, particularly in the professional design community, about attic radiant heat barrier effectiveness and problems. Because they are being installed on the bottom of the sheathing or underside of roof joists, they act as a heat trap for the energy being conducted through the roof which would normally radiate into the attic air or be transferred by CONVECTION (fluid flow heat transfer) to the attic air, and be vented through roof vents, ridge vents, gable vents, etc. By trapping that heat, they are causing the underside of the shingles and particularly the felt and sheathing to get a lot hotter than they otherside would, essentially changing it from a system where the shingle top surface might reach 120-180 F and the inside surface of the sheathing about 80-140F in the summer, to making the entire roof system equal to the outside surface temperature. This causes more rapid shingle deterioration and cracking, and makes the felt or plastic moisture barrier under the shingles brittle and subject to failure.

Also, any moisture above the radiant barrier (from roof leaks or humid air coming into the area) is prevented from evaporating by the attic airflow which would normally remove it, so it starts acting like a steamer. I have seen both wood and metal lofts and attics become a major mold farm in months because of this effect, and a couple of roofs which started sagging due to rotted sheathing within 2 years of reroofing with tightly adhered radiant barrier. Some radiant barriers are vapor-permeable to reduce the moisture issue, many are not, but few actually are effective in letting moisture freely escape.

Having seen these products in use, and having analyzed and specified building products for use from the Middle East to the Arctic for decades, and having a Masters in Arctic Engineering (a degree predominately in energy conservation and heat flow), my personal opinion is that these radiant barriers will be banned by code within 10-15 years for unheated (so-called "cold" roofs) roofs, because they just do not use the principles of thermodynamics correctly. For more info on this issue Google the following search phrase  - moisture trapping by radiant attic barriers       and read the government (not the manufacturer) literature on the issue.

5) Unfortunately, the right way to handle this issue is to put the radiant surface on the OUTSIDE of the house - by using reflective materials on the roofing material. This is already done with flat roofs, house trailers, and industrial structures by spraying with alumiunum paint, and a few brands offer reflective aggregate shingles that are slightly more reflective and radiant than normal shingles. People obviously do not like this reflective surface from an aesthetic standpoint, though with solar cells coming into more general use this may soon be more widely adopted. The idea should be to keep the solar energy from penetrating into the building envelope at all, not try to re-reflect it away after it has penetrated throguh the roof system.

The sprayed-in foam has a couple of issues you need to be aware of:

6) it needs to be the low-pressure expanding type mixed for use around window frames, as fully expanding foam can bow joists or trusses and pop drywall ceilings free as it expands, and non-expanding foam actually shrinks as it cures, leaving gaps for air and heat flow alongside the ceiling joists.

7) being closed-cell it is essentially impervious to moisture, so the vapor barrier on the house side has to be EXCELLENT (incuding sealingof all penetrations), or it will trap household moisture escaping into the attic and promote mold and rot in the ceiling drywall and joists.

8) it tends to bleed chemical fumes into the house for a long period of time (can be noticeable for years), which may be objectionable to some people from an odor or environmental standpoint, and especially should be considered if any residents have severe allergy issues or respiratory problems.

9) I emphatically recommend AGAINST use of sprayed-in foam between ceiling joists or truss members in any area that can have cold attic air that could cause moisture condensation in the insulation, though this is probably not a significant problem where you live, assuming your Dallas is the city in Texas. For essentially year-around air-conditioned homes in hot climates, the problem can actually be condensation of attic air moisture on and in the colder ceiling surface insulation and on cold attic runs of air conditioned air, so attic ventilation becomes a critical issue to remove the moisture before it condenses.

In summary, having seen an awful lot of attic moisture and thermal problems, my personal recommendation would be to ensure excellent sealing of the house from the attic, use normal UNFACED fiberglass insulation, and instead of a radiant barrier ensure adequate full-attic ventilation. If you decide to got with a radiant barrier, then I would recommend a perforated one, sloping up towards the sides a foot or two and stopping a foot or so clear at the sides so moist air under it can escape to the roof joist spaces and be vented from the attic. I have seen this done several times with a fine nylon net strung above the insulation in the attic, supporting the barrier, resulting in something very similar to the double-roof system used in bedouin tents, where airflow between the two layers keep the hot air away from the living space.

?

A couple of comments about what Jim said:

1) Regarding type of insulation, in cold winter environments: Cellulose and fiberglass are actually about comparable in R value when installed - blown in cellulose runs from 3.2-3.8 R value, fiberglass batt 2.9-4.3 R value depending on manufacturer and whether hig-density or low density, high-efficiency or standard, according to official Department of Energy publications. Measured values in attic test cases, in areas with a true winter, after 10 years showed a decrease from 3.4 (in the test case) down to 2.1 for cellulose, and 3.5 to 3.3 for fiberglass batt, due to packing or matting. In an attic environment, there WILL be condensation or frost on the insulation at some point during the year (assuming an area with true winters) and in highly insulated houses commonly for a substantial time period each winter. Fiberglass packs down slightly from that weight but mostly rebounds, cellulose packs down and mats and does not substantially recover, so over the years cellulose loses 1/3 to close to 1/2 its insulation value, fiberglass about 10%.

2) a note on radiation barriers attached to the bottom of the rafters - there are a lot of installers and homeowners making two major mistakes with this product that can cause major trouble: First, be sure to terminate it short of the eave openings. I have seen cases where it was carried all the way out to the fascia board, thereby blocking all airflow on the underside of the roof. Even carrying it all the way to the eaves along the bottom of the rafters will block off ventilation to the main attic area. You have to leave the air space between the rafters open to full airflow from the soffit/eave area ot the ridge vent. Second, do NOT run it continuous from eave to eave across the full width of the attic - leave a gap about a foot wide under the ridge vents so warm and moist air in the attic can vent through the ridge vent. Closing the ridge vent area off with the radiant barrier effectively puts a vapor barrier around the main attic area, causing retention of the moisture which WILL accumulate there, promoting mold.

?
Steve made a good point.  Also, while it isn't required to remove the old insulation you can check the ductwork, wiring, etc. with the old stuff removed,  You can also spray foam around all openings and holes in wall top plates to better seal your home as Steve was pointing out.  My concern is the potential for mold spores you mentioned in your question.  If you suspect there are any get a good company in to remove the old and clean the attic.  Another concern is asbestos.  Your home is old enough you could have it in there and that's worse than mold if released into the air.

Todd Shell
Todd's Home Services
?

Have you checked Angie’s List? Angie’s List Answers is a great place to find advice from professionals, but for ratings, reviews and information to help you hire the companies you need, visit www.angieslist.com today.

 

 

?

Insulation reviews in Georgetown

A

Rating
The first job that I hired
Georgetown Insulation Contractors Provider Name Locked
to do was blown-in cellulose insulation for the first and second floor of my house. When the winter time came you can tell what a difference the insulation made on the temperature of the house. The second job that I hired
Georgetown Insulation Contractors Provider Name Locked
to do was the installation of 13 energy efficient windows which came out great!!d
Georgetown Insulation Contractors Provider Name Locked
the owner is very easy going and great to work with. He always returned my phone calls and answered my e-mails and would let me know if they couldn't come to complete the work due to the weather. I will be using
Georgetown Insulation Contractors Provider Name Locked
and his crew to finish the rest of my windows.
- Teresa Sharlene B.
N

Rating
Everything went well. Cavalier described the scope of work and gave me a cost estimate and a "not to exceed" estimate and every time I've used them they delivered on their promise. I also appreciated their honesty in that during one occasion I asked for work to be done and they said that was not in their area of expertise. I'd much rather have someone be honest with me and do what they say they will do and if they can't do it, to let me know. Cavalier is definitely that company.
- Susan B.
A

Rating
He did what Angie's List said he would do just not a comprehensive anaylsis, no heat loss calculations, detailed action plan; just a verybal 'here's where it's cold' - which I already knew. Waste of money. He did recommend I contact Dominion Energy for comprehensive plan including a blow-test for $50.00 - about the same I spent on
Georgetown Insulation Contractors Provider Name Locked
.
- Gail B.
A

Rating
Insulation job took 2 days & results are fantastic. Huge noticeable difference in temperature on 2nd story. Crew was professional & worked with us on a tight deadline.
- Christina K.
A

Rating
Excellent. They came out right away for an estimate. I had someone from another company look at the job prior to this, and their bid was over $4,000 because they said I needed things that I did not. The total was $2,865 but with tax credits, I paid about $1,800. I hired them based on Angie's list, and the interview with the person that bid the job. I needed the crawl space insulated because I was having wood floors installed, and we discovered that there was no insulation under the house. They were able to do the work sooner than expected. Three men came on time, and were respectful of the new flooring that was being installed. I wasn't there during the actual insulation, but my floor contractor told me they were very professional, and knew what they were doing. In fact, my floor contractor was going to inquire about hiring
Georgetown Insulation Contractors Provider Name Locked
for his own home. After the job was done, they sent out someone to check on the work. There was a tiny problem, and that same day the guys returned to remedy the issue. I felt very comfortable working with thie company from the first call to their office! I will be calling them back to look at my attic insulation.
- Kathy D.
A

Rating
This review is a follow-up to the initial review I have completed, which only included the initial blow-door test and infrared analysis. Once the contract was signed, a installation date was scheduled on the spot. On the day that the installation was scheduled, I received an e-mail early the same morning, informing me that the crew will be a little late, due to having to pick up an extra barrel of insulation solution. I have to say, the overall communication throughout this process has been fantastic! I initially was expecting the crew to arrive at my home for 8:30am. However, based on the e-mail, I was expecting around 10am. The crew showed up at 9:10am.







The crew went right to work, performing the prep work. The were very friendly, professional, and very meticulous in all aspects of their work. The crew worked non-stop until the job was complete. My roof line is about 2,400 square feet, and it took the crew from 9:10am-5:30pm to complete the job. Once the job was completed, the crew performed a thorough cleaning. They actually left my house cleaner than it was when they arrived!







A few days after the installation, Mr.
Georgetown Insulation Contractors Provider Name Locked
returned to perform an inspection of the work, as well as perform a post-installation blow-door test and infrared analysis. As before, he was very professional and offered me great tips on other actions I can take to further my cost savings.







Overall, I am very satisfied with my experience with this company. I have already recommended them to a family member that is interested in spray foam installation. I was impressed with the communication from the owner throughout the process. Mr.
Georgetown Insulation Contractors Provider Name Locked
called me after Mr.
Georgetown Insulation Contractors Provider Name Locked
's initial visit (first blow-door test), an hour after the crew finished the installation of spray foam, and the afternoon after Mr.
Georgetown Insulation Contractors Provider Name Locked
performed his inspection and second blow-door test.







Instead of my heater coming on every 15 minutes, it comes on 3 times per night! My home is no longer damp and drafty. I can't wait to get my Entergy bill to see the cost savings. This project will pay for itself in no time!
- Christopher N.
A

Rating
The service went well. The technicians were on time and professional dressed for the job. They were efficient and consistent worker. They got the job done and I was happy with the work. I had no problem scheduling the deal.
- CLARENCE J.
B

Rating
plastic sheet on ground required removal of trash left by original DIYer (previous owner), replaced plastic with thicker material as required by code by previous inspector, dug out footing and extended footing removing rotten wood, wrapped and sealed all ducts, used extra insulation due to size of ducts, removed all debris. only complaint is that new insulation is a different outer color.
- Gerald S.

All Insulation Contractors in Georgetown, CA

Companies below are listed in alphabetical order. To view top rated service providers along with reviews and ratings, Join Angie's List Now!

1st Choice Construction Services,Inc

3362 Monier Cir
Rancho Cordova

A Better Insulation Co

2709 Green Glen Rd
Shingle Springs

Aaron Plumbing

Po Box 2657
Vacaville

ABC INSULATION & SUPPLY CO

11386 AMALGAM WY
Rancho Cordova

Abreu Enterprises

2320 Laramie Ln

Affordable Insulation

5901 Rosebud Ln
Sacramento

Air Tech HVAC Inc

2885 Mosquito Rd
Placerville

Air Tek Home Performance

P.O. Box 25
Wilton

Akers Home Improvements

PO Box 671
Fair Oaks

All City Construction

6744 Lincoln Avenue
Carmichael

All Pest Pros

6333 Rio Linda Blvd
Rio Linda

All Phase Construction

2023 Polley Dr
Roseville

ALL YEAR HEATING & AIR CONDITIONING

801 Plaza Avenue
Sacramento

Allstate Roofing

607 Elmira Road
Vacaville

America's Advantage Remodeling

4101 Power Inn Rd
Sacramento

American Home Shield

889 Ridge Lake Blvd

Angels Handyman Service

4748 16th Ave.
Sacramento

Auburn Roofing Inc

130 Elm Ave
Auburn

Betlan Construction

PO Box 1134
Pine Grove

Beutler Air Conditioning and Plumbing

1961 Optisolar Ln
Mcclellan

Bier Construction

18824 Sugar Pine Dr.
Twain Harte

Bill Reed Handyman Service

21000 Old River Road
West Sacramento

Bowerbird Remodeling

2418 overhill
Davis

Brazil Quality Construction

3871 Security Park Dr
Rancho Cordova

BRAZIL QUALITY ROOFING INC

3871 SECURITY PARK DR
Rancho Cordova

Brian Faricy

904 Tanner Ct
Folsom

Brothers Home Improvement Inc

2510 Douglas Blvd
Roseville

Brower Mechanical, Inc.

4060 Alvis Ct
Rocklin

Business Finance Store

Castle River Way
Sacramento

BW Maintenance & Remodeing

PO BOX 1764
Norht Highlands

Cal-Vintage Roofing Co Inc

11257 Coloma Rd
Gold River

California Energy Consultant Service

11367 Trade Center Dr
Rancho Cordova

Capital Insulation

721 N. B St
Sacramento

Charles E. Schoff & Co.

9336 Caltrop Court
Fair Oaks

CHERRY HOME IMPROVEMENT

4523 HARLIN DR
Sacramento

Clarke & Rush

4411 Auburn Blvd
Sacramento

Comfort City Inc

9941 Horn Rd Ste J
Sacramento

Connor Construction Co

6709 Chastain St
Orangevale

David W. Hoppe Construction Inc.

4560 Bailey Way
Sacramento

Diamond Construction

PO Box 1661
Diamond Springs

Eagle Shield Inc

4115 Blackhawks Cir
Danville

Ecoattics Energy saving solutions

970 Reserve Dr
Roseville

ejconstructioncompany

PO Box 657
Galt

EL DORADO BUILDERS EXCHANGE

3430 ROBIN LN
Shingle Springs

Exterior Touch Inc.

12610 Waverly RD.

Ferguson Drywall

6381 Pine Zette Ln
Placerville

Five Star Performance Insulation

PO Box 292964
Sacramento

Future Energy Savers

9721 Kent Street
Elk Grove

Gearhart Construction Inc

PO BOX 1294
Antelope

Gilmore Heating Air & Solar

4429 Missouri Flat Rd
Placerville

GOLD RIVER CONSTRUCTION

1807 STARBUCK RD
Rescue

Goldstar Insulation - Sacramento

901 North B Street
Sacramento

Green Choice Living

1007 W Grove Ave Ste E
Orange

Greg Todd Construction & Home Repairs

9530 Beacon Ave.
Orangevale

H F SCHWARTZ BUILDERS

3941 PARK DR
El Dorado Hills

Hall's Window Center

11297 White Rock Rd
Rancho Cordova

Handyman Services

2526 Ganzan Way
Rancho Cordova

Handyman Services

2029 Benita Way
Rancho Cordova

HB Urethane Roofing

1037 N MARKET BLVD
Sacramento

HOME DEPOT

4641 FLORIN RD
Sacramento

HomePRO

5908 Courville Ct
Fair Oaks

Honey's Air & Solar

5536 Pirrone Rd
Salida

Huft Heating & Air Conditioning Inc

10103 Iron Rock Way
Elk Grove

J R Putman Inc

11330 Sunrise Park Dr Ste A
Rancho Cordova

J&A Pino Construction

424 42nd st
Sacramento

Jarrod Holbert Roofing

3032 Highgrade Street

JD SERVICES

4531 788TH ST
Sacramento

JDM Construction

2424 Darwin St.
Sacramento

JOE'S SHEET METAL

5012 Birchwood ct

John Ellis Construction

8100 Mulrany Way
Antelope

Kleenair Heating & Air Conditioning

1657 Silica Ave
Sacramento

Liberty Construction

3848 Sherbrook Dr.
Santa Rosa

Lowe's

8369 Power Inn Rd
Elk Grove

Lozano Construction

4229 Lozano Lane
Vacaville

Lucent Energy Group

4153 Northgate Blvd Ste 6
Sacramento

Mac's Remodeling

PO Box 1852
Rocklin

mattox construction

8783 Ash hill ct.
Orangevale

Maximus Development Inc

3355 Myrtle Ave
North Highlands

MCDONALD PLUMBING HEATING & AIR INC

3618 BROADWAY
Sacramento

Meek's Lumber & Hardware

1414 Colusa Hwy
Yuba City

Mountain Air Energy

770 Marina Park Dr
El Dorado Hills

Mr. Handyman of Arden Arcade

4380 Auburn Blvd
Sacramento

NORDIC AIR MECHANICAL

4054 BERRY RD
Shingle Springs

Northern California Roofing Co

859 Cotting Court
Vacaville

Nushake Inc

319 S Parallel Ave
Ripon

O'Toole GBC

1224 V street

Old School Construction

1813 Wentworth Ave
Sacramento

Pacific Coast Termite Inc

40487 Encyclopedia Cir
Fremont

Powers Interior Contracting

PO Box 1601
North Highlands

Prime Cut Construction

5160 Reservoir Rd
Georgetown

Quality First Home Improvement Inc

6545 Sunrise Blvd
Citrus Heights

RANKIN LYMAN

8987 PRAIRIE TRAIL WY
Sacramento

Ray O Cook Heating & Air

889 Riverside Ave
Roseville

RCI GENERAL CONTRACTORS INC

P.O. Box 163336
Sacramento

Sacramento Bldg Prods

1600 Raleys Ct
West Sacramento

Sacramento Building Performance

5245 Nyoda Way
Carmichael

Serve All Contracting

3323 Watt Ave
Sacramento

SHECan2

2646 Waterton Wy
Sacramento

Sierra Building Performance

Aldea Drive
El Dorado Hills

Sierra Pacific Home & Comfort, Inc.

2550 Mercantile Dr
Rancho Cordova

Skyline Energy Savers Inc.

2611 Highlands Hills Dr
El Dorado Hills

Smith & Jones Heating & Air

PO Box 799
Shingle Springs

Sticks & Stones Construction

3304 Cambridge Rd
Shingle Springs

Straight Line Roofing & Construction

4415 Commodity Way
Shingle Springs

Synergy Companies

1376 E turner rd #A
Lodi

The Insulation Pro’s

3032 Thunder Valley Court Suite 100
Lincoln

The Rug Bug Inc

4924 Foster Way
Carmichael

TIM LEAKE BUILDER

1106 NORTH D ST
Sacramento

Tom Yancey Company

7101 Fair Oaks Blvd
Carmichael

Top Quality Painting

2363 Pinturo Way
Rancho Cordova

TSD Construction

942 Trestle Glen Way
Sacramento

Warmzone

12637 S 265 W Suite 100

Western Insulation

1015 N Market Blvd
Sacramento

Yancey Company

8250 Alpine Ave
Sacramento

Shop Local Insulation Services in Georgetown, CA

Join Angie's List to get the best local reviews in Georgetown.

What Does My Membership Include?
  • Instant access to reviews for 700+ services
  • Exclusive service discounts - up to 70 percent off!
  • Top-notch support from our live call center
How does Angie's List work?
1. Say you need a Insulation Contractor
2. Angie's List has tons of detailed, local reviews.
3. Find a winner, and book them.
4. Angie's List is there to resolve any issues.
CBS
Good Morning America
Fox News
USA Today
The Wall Street Journal
MSN money