-Find top-rated Service Providers
Find top-rated Service Providers

Find Top-Rated Orlando Window Film Companies

Angie's List helps you hire the best - and avoid the rest!

Window Film Companies to Avoid


Top Rated Window Film Companies


Prevent buyer's remorse with us

  • Over 3 million people trust Angie's List to help make the right choice
  • Be informed to avoid costly mistakes
  • Shop with us to ensure a fair price
  • Our complaint resolution team will help if a project goes bad
+See Verified Local Reviews
See Verified Local Reviews

Over 1,161 reviews for
Orlando Window Film Companies from people just like you.

" and Fisher were professional, courteous and provided a high quality service. The films have been in for over 9 months" now and have retained the same look since initial installation. I highly recommend this company and would use them again myself.

-Douglas C.

"Arrived on the appointed day with all the required materials and tools. Each of the 11 windows was thoroughly cleaned and the film was applied. The work was very" professionally done and took approximately 4 hours. There were no bubbles or other imperfections visible. The clean up of trash and excess materials was complete. After the installer left I was emailed the Federal Tax Credit form so that I could claim the tax credit at the end of the year. I did not qualify for the power company rebate since I did not have all the windows on 3 sides of the house tinted. Standing in front of a tinted window in direct sun, there is a noticeable and obvious difference. Highly recommended.

-Glenn R.

+Shop, Schedule, and Save on Services
Shop, Schedule, and Save on Services

Shop, Search and Save from anywhere!

  • Offers are exclusively provided by highly rated companies
  • Angie’s List members have access to exclusive discounts on local services
  • Shop, schedule, and stay on top of progress from any device
  • Our 30 Day Refund Guarantee means you can buy with confidence!
+Join 3 Million People on Angie's List
Shop, Schedule, and Save on Services

Over 2 million people trust Angie's List.

  • Your Membership Includes:
  • Instant access to top rated businesses covering 700+ services
  • Our Complaint Resolution Team to help when a project goes bad
  • On-the-go access to our iPhone, Android, & iPad apps
Find top-rated Service Providers
See Verified Local Reviews
Shop, Schedule, and Save on Services
Join 3 Million People on Angie's List

Local Articles in Orlando

sunroom floor to ceiling bow windows

From unusual shaped windows to bay-window reading nooks and light-filled sunrooms, the right window replacement will amplify your interior design.

storm windows

DIY storm window installation is a cinch with these five steps.

winter window with coffee mug

Window replacement may seem to be a fair-weather job, but replacing windows in winter offers unique benefits.

foggy window

Did you know you can often fix foggy windows without replacing the entire window frame?

Angie's Answers


Hello - I hope my answer will help point you in the right direction.


The reason you're having a hard time getting clear information is because there are hundreds of companies saying their window is the best. There are probably millions of different features you can choose to have for your windows and in price ranges from $169-$1200 (per double-hung window).


I've been in the business for 15 years and have seen many different window products from many different dealers and manufacturers. This all comes down to: "what's important for you and your home?" If you want a strong warranty from a company who has a full-time service department to give you piece of mind and service your windows should needs be, or are you looking at only those companies who offer true wood interior windows that you can paint or stain to match the home decor? Whatever is your hot-button, then that's where you want to start.


I would recommend you first choose how you want your new windows to look. Wood-interior with vinyl clad is only offered by certain companies, while there is a vinyl woodgrain finish to give you similar results without the maintenance. If you're only looking for a white interior and don't want the maintenance, a fiberglass or vinyl window would be the best choice from what is offered in the market today (vinyl will be less expensive - not necessarily cheaper quality). If you are going to change out a window to a french door and a door to a window, then you WILL NEED to find a contractor with some carpentry experience. Some companies will tell you upfront that they do not handle those sorts of remodeling projects due to the complexity and time it would take to get it complete.


Unfortunately, we won't be able to personally help you with your project as we work in the New England Area. However, if you wish to talk further, please feel free to email me at: sven@ritewindow.com and I'll be happy to let you know our prices for what we offer so you can compare and hopefully find a similar company to do the work for you near the Austin area.




Get your roofer back out there.  Course of shingles above the window need to be pulled, self sealing flashing, drip caps, and counter and step flashing are going to be required here. 


This is a flashing issue as the window connects to the mansard roof surface. 


Condensation and a leak are two different and very noticeably different (i.e. volume) things.


Flashing and roofing on Mansards can be tricky but is sounds very much like a roofing issue. 


For a broken window (or leaking seal in multi-pane unit), for a standard roughly 2x3 foot window, can run from low of about $75-125 for single pane to more like $200-300 range for triple pane, depending on construction and any special ultraviolet or heat reflective coatings. If a removeable window unit, of course cheaper to remove it and take to replacement glass place then have them come out, measure glass size, order glass unit, then come back to install.


If taking in yourself, commonly they can do single-pane in an hour or two, but count on a week or so typically for sealed double or triple pane unit to come in, so you will have to seal the opening in the interim. That is an advantage of having them come out - they measure and determine type of unit on first visit and can seal with tape and plastic sheeting (if you have not already done that), then come back with new unit and install a week or two down the road - but you are not stuck with an opening in the wall for a long time.




Much easier to scratch and typically not as good a finished quality as compared to glass.


Benefits are the resistance to breakage as mentioned by LCD.  Any glazing shop should be able to re-create that panel. 


Thermal numbers look okay when looking at the NFRC.


Do you have any other data on them?  Air infiltration, Design Pressure, Visible Transmittance, and Condensation Resistance are all good evaluators.




Air infiltration rate is way high at 0.21.


It may look nice in person but the performance numbers are below average. 

If you are being sued and/or counter suing, then you should hire a lawyer.  While you can do small claims court and sue without a lawyer, the Contractor's insurance will provide him a lawyer to defeat you.  Plus, odds are good the Contractor has more court experience than the average Home Owner, especially if this is his standard opperating procedure.  If you go against a lawyer, you will lose, even if you are right (Saying the right thing at the wrong time is very bad in court rooms.  Get a lawyer who knows the processes).

Once you decide you are suing, there should be no further contact or access to the property with the contractor.  If you have already been told you are suing, you should stop all access to your property (you are allowing them to gather evidence AGAINST you.  Your lawyer may be able to reach an agreement outside of court to allow the contractor to fix the work within a specific time period, but even then make sure you are not in contact with the contractor.  Anything you say, will be turned against you ("The Home Owner said it was okay.")

A building official has no legal obligation in court; his job is safety and minimum construction requirements as allowed per Code.  He has no say over materials and methods, and cannot assess damage. (IRC doesn't have a requirement that the door you mention exceed 35", so he won't care it isn't 36" as an example).  What he CAN do is state if the work is unsafe or causing other conditions which are unsafe.  Let your lawyer decide; but it is not in your best interest to have the Building Offical inspect with the contractor.

To sue you need to show damages.  Get another contractor (get some references or hire an architect to help ensure you get what you need) to inspect the work and give an estimate to repair.  The amount the contractor(s) estimates becomes what you seek in court (plus court fees) from the contractor.  If his work caused problems, you should be suing, not sued.

Also, be aware that no door manufacturer makes an actual 36" door (as an example).  They each have their own frame sizes, so a "36 door" in reality will be 35 7/8" to 35 3/8".  Each door maker has slightly different sizes (go online, you can see Pella, Anderson, Kolbe-Kolbe, etc. have their actual sizes available for PDF downloads).  If you replace a Pella 36" with an Anderson's 36" they won't fit perfectly.  In fact, the different styles within the same manufacturer are sometimes even different.  The purpose of trim is to hide the gap between the wall and door frame, so your door may be perfectly fine in size and method of installation. 

When you have this work corrected (and for any future work) utilize the services of a lisenced Architect.  They will oversee the work, review requests for payments and document existing conditions and conditions found during construction to prevent the situation you are now in.  They will also ensure the proper permits are filed and the inspections called for.  Because they are a third party to the agreement, they can be the 'bad guy' and make the contractor perform, where you just have to pay the invoices they approve.  The contractor deals with the Architect (and vice versa) and you get the project you wanted. The cost of the architect would have been around $3,200 and is minimal compared to what you are dealing with now, the peace of mind is worth it and architects often find cost savings that go directly back to the Home Owner.  When you account for time alone, you will have spent more than this on just preparing and attending the court case.

Because this is headed to court, stop all communication with the contractor and get yourself counsel.  Good luck.

Window Tinting Or Film reviews in Orlando


A friend told me about 3M window film. She told me that she had the film put in her home a few months ago was pleasantly surprised on how well it performed. I was intrigued and did some research and found out that the company who did our duct replacement had recently became a 3M dealer. I was so pleased at the work they had done ...More on the duct seal that i wanted to give them my business again. I called up and they were as pleasant as ever. The young men who came out to do our estimate was Wonderful!. He was professional, and courteous. Explained all the different options of the films and helped me decide which would best fit my needs. He used a heating lamp and UV display which helped me too see how much heat and UV rays in percentage the film actually eliminated. This made it easier for me to see just how well these films worked.
The technicians who came to do the install were AWESOME! They showed up on time and showed me just how everything worked from the cleaning process all the way to the application of the films.
I will definitely use again and I strongly recommend them.
- Juan O.

The two-story living room in my house has a large picture window facing the East. In the morning, the sun light is too bright. After I called , came to my home to give a quote. He was knowledgeable and recommended 3M Nightvision 25 for my situation. The total size of the window is 50 Sq. Ft. and the quoted ...More price was $450. Later I saw a discount deal of the company on the web and asked whether the discount could be applied to me, the sales lady said she would check with . Without further confirmation, I scheduled installation anyway. The person came to install the film was really nice and skillful. He carefully moved the tall ladder around to avoid hitting my furniture and did an excellent job. With the film, the window looks cleaner and more beautiful. To my surprise, when the installer showed me the bill in the end, they gave me a $200 discount – called it Angie’s List Big Deal Offer, which was far more than I originally expected. Overall, my experience with this company is very positive and I high recommend it.
- Ping H.

I had hired a different company to tint our windows at our manufacturing plant on OBT, but a month after the job was completed, the corners were starting to peel and some parts were bubbling. i was very frustrated with that previous company, so i wanted to make sure it got done right this time.
I called customer service at ...More to get a quote and a guy showed up (can't remember his name). He knew exactly what the issue was the moment he looked at the windows, explained to me what he will do to ensure that the peeling doesn't happen again, and gave me a quote to rip it all out and install new film, as well as a couple of vinyl cut door signs. He was VERY knowledgeable, and speedy.
We set up a date to do the job and they took care of it quickly. I was very impressed with the customer service. After I saw the job they did, I hired to come tint the windows in my house with their clear 3M film. He also used a frosted privacy film on my front door, so nobody can see into the house from the street. It's only been a couple weeks, but I can already feel the difference. Great job, and one of the FEW tinting companies that has good customer service (trust me, I've called around).
This week, i'm taking my girlfriend's car to their office to get tinted. I'll write a review on that after I get it done.
- Dimitri C.

Window Film Companies in Orlando

Companies below are listed in alphabetical order. To view top rated service providers along with reviews and ratings, Join Angie's List Now!

A Blinds Co.

1289 N US Highway 1 Ste 6
Ormond Beach

Advanced Film Solutions

1642 Land O Lakes Blvd

Atlantic Storm Protection

640 Childre Avenue





DarthShader Tint & Vinyl

6785 Narcoossee Road

Ferran Services & Contracting

530 Grand St.

Florida Home Improvement Associates

4070 SW 30th Avenue
Fort Lauderdale

Glass Protection Specialists

69 Drennen Rd.

J and J Creative Remodeling Solution

11232 Scenic View Ln

JAG Window Tinting & Treatments

725 S. Cocoa Blvd

Mobile Tinting Of Palm Bay LLC

462 Martin Rd
Palm Bay


16877 E. Colonial Drive

Orlando Window Tint Specialists

171 Obrien Rd

Property Services by Musitech

7512 Dr. Phillips Blvd.

Radical Ray Rejection Window Tinting

6785 Narcoossee Road

Rays Home Repairs

739 woodvalley way

Shutter Outlet


Solar Diversions and Design

3250 S Semoran Blvd



The Solar Guys

13624 S Us Hwy 441

Ultimate Window Tinting

85 W Michigan St

Your Guy Around The House

13750 W Colonial Dr
Winter Garden

Shop Local Window Tinting Or Film Services in Orlando

Join Angie's List to get the best local reviews in Orlando.

What Does My Membership Include?
  • Instant access to reviews for 700+ services
  • Exclusive service discounts - up to 70 percent off!
  • Top-notch support from our live call center
How does Angie's List work?
1. Say you need a Window Film
2. Angie's List has tons of detailed, local reviews.
3. Find a winner, and book them.
4. Angie's List is there to resolve any issues.
Good Morning America
Fox News
USA Today
The Wall Street Journal
MSN money