This concrete contractor gets our member’s stamp of approval on this West Coast backyard project.
Find Top-Rated Baltimore Stamped Concrete Companies
Angie's List helps you hire the best - and avoid the rest!
Stamped Concrete Companies to Avoid
Top Rated Stamped Concrete Companies
Prevent buyer's remorse with us
- Over 3 million people trust Angie's List to help make the right choice
- Be informed to avoid costly mistakes
- Shop with us to ensure a fair price
- Our complaint resolution team will help if a project goes bad
Over 1,848 reviews for
Baltimore Stamped Concrete Companies from people just like you.
Shop, Search and Save from anywhere!
- Offers are exclusively provided by highly rated companies
- Angie’s List members have access to exclusive discounts on local services
- Shop, schedule, and stay on top of progress from any device
- Our 30 Day Refund Guarantee means you can buy with confidence!
Over 2 million people trust Angie's List.
- Your Membership Includes:
- Instant access to top rated businesses covering 700+ services
- Our Complaint Resolution Team to help when a project goes bad
- On-the-go access to our iPhone, Android, & iPad apps
Access to trusted reviews, the best Stamped Concrete Companies and exclusive discounts!
Real Member ReviewsMemberships allow Angie’s List to certify that all reviews are real reviews from real members—no fake, bogus, or anonymous reviews here!
DealsAngie’s List is a Community that you’ll use time after time. Research who to hire, learn tips and tricks, and consult with your neighbors
Instant Community AccessMembers can choose from tons of deals and discounts for projects they need to do, like 30% off exterior home painting!
Complaint ResolutionIf a project goes badly, Angie’s List has a complaint resolution team standing by to help you.
Local Articles in Baltimore
Mudjacking or concrete leveling may be the answer if your front porch is stooping or your sidewalk is slouching. Consider these tips to level sunken concrete.
Contractors say homeowners with this trait are the most satisfied with home improvement projects.
Stamped concrete is a growing trend for patios and pool decks, but it requires a special technique. Hire a qualified contractor to get a professional look.
Bids are NOT done based on a multiplier on top of materials cost to get labor cost. Think of the consequences in the example you gave - by that method using say plain home depot tile made in Honduras might cost $5/SF materials, so by your method $10 labor. Now, same floor, with Carerra marble or Barre Granite at $75-100/SF - so do you want him charging you $150-200/SF labor when it takes almost exactly the same time regardless of material ?
To put it in simple terms, contractors:
1) figure the amount and cost of materials and consumables needed from the plans and specifications, applying a markup (from 15-50%, depending on contractor and how fancy or specialized a job it is).
2) Then they figure the equipment needed and the operating time to be used or elapsed time to be rented or leased - either opperating hour or elapsed time, or combination of both, especially if it consumes fuel
3) They then figure the labor time for the various trades required to do the job, maybe add an efficiency or ease of work multiplier to those hours to fit the job conditions, multiply those hours by the hourly pay rates, then multiply that times the "load" or "Labor Overhead" to account for employment taxes, workman's compensation costs, health plan, etc, etc.
4) Then they add in the cost of any architect or engineer plans or certifications that are needed, government permits and inspections, etc.
5) Then they add in any subcontractor bids, with appropriate contingency amount for each.
6) All those above totals are added up, an appropriate overall contingency added if needed (typically 5-10%, but on remote site jobs I have seen as high as 200%), and (depending on how contractor figures his costs) at least all the "in-house" costs like his equipment, consumables, and labor costs have a percentage overhead and profit added to them - typically about 100-150%. Some contractors use a lower overhead percentage but apply it to the total estimated job cost, not just in-house costs.
This "company overhead" or "general overhead" or "G&A - General and Administrative Overhead" covers the costs of financing and running the company, management and secretarial and general supply and maintenance costs, buildings and equipment yards lease or mortgage cost, working capital cost, insurance, loan interest, general shop equipment payments, profit, etc. Some contractors use a lower overhead and apply it to every cost in the job, some (especially those doing government work so havingto adhere to government accounting rules) apply a "markup percentage" to materials and rental costs and outside subcontract services, and apply G&A overhead only to in-house costs.
That being said, for a general class of work it does generally (on normal jobs) work out that there is a general multiple of labor to materials cost. For instance, yard work and residential tree work is heavy on labor, so it might have a labor to materials ratio of 3:1 or even 5:1. Detail foundation hand excavation and underpinning can run to 5:1 or more. Many types of building construction like plumbing, tile, carpentry, etc. do end up with a very roughly 2:1 or 3:1 ratio of labor to materials cost. At the other extreme, high energy efficiency or hurricane rated glass installation or a fancy full-building computer and communications system or high-end entertainment center might have a labor to materials ratio of 0.25-0.5 because it is designed to go in pretty fast, but the materials cost a lot.
For your case, a hardscaping ratio could run from 0.5:1 or less to as much as 3:1 or more, for installations with very expensive imported stone and fancy woods and a lot of bought decorative items such as statuary, to the opposite labor-intensive landscaping with lots of sidehill terracing and hand-planted flower beds, hand-dug irrigation system trenches, and manual-placed concrete block or railroad tie walls. Each job should be figured on its own merits - using a "rule-of-thumb" is where people commonly get unpleasantly surprised. That is why you typically get 3 bids unless you have a contractor you trust from prior experience and are confident will give you a fair shake regardless of being sole-sourced. Personally, both for my own purposes and professionally in the design and construction business, I have found sole-source to trusted contractors you have experience with is, in the long run, a BIG money and time saver, as well as making it far more likely to finish on schedule and let you sleep at night.
You need a general contractor - prefereably one who specializes in additions, because you have excavation, waterproofing, concrete, concrete cutting, carpentry, door and window, etc trades to coordinate.
The cost will depend a great deal on your topography around the house - if the base of the window will be above ground level at least 6 inches, then could run about $500 for a legal egress window purchase and about $1000-2000 for installation, depending on how deep into the concrete you have to cut.
If the bottom of the window will be below ground level, then to call it a bedroom (which mandates legal sized second egress and usauully at least one window) then you will have two choices - bring it out into a solid watertight concrete storm cellar with collar to keep water out, stairs, and and weather and bug-tight cellar door that is inward-opening, which means a lot of space for stairs and landings top and bottom, or bring it out into an oversized window well at least 36 inches in diameter, and with steps to ground level, with adequate drainage and waterproofing to keep it dry. Either way, sometimes about as easy to put in an outside door as a window, and might raise property value more. Cost from $2-5,000 depending on how deep into concrete wall you have to dig, whether concrete wsall needs reinforcing with steel frame because of the depth of cut, how easy the digging is, and what your water conditions are near the foundation. The last thing you want to do is create an easy water or vermin ingress with your egress.
The cost to install the veneer stone has a wide range do to many factors. It can range from around $9 to $17 per square foot. It depends on the location, the stone being used, job access, skaffolding needs, wall prep and such. I would think you would be on the lower end of the scale. Your job is on a concrete surface so it eliminates one of the biggest problems they are having with this product, wall preperation. This one of the things that separates the high bidders from the low ones. There are million dollars homes being torn down because of improper wall prep. One a wood frame house a backing system that allows drainage is a must or the moisture absorbed by the veneer can rot the walls behind with alarming speed. Some have had makor damage within the first four years. On a concrete wall the veneer needs no such prep at most wire mesh applied if it is an older concrete wall.
Is the wall that the garage is sloped toward and adjacent wall of the home?
If not, it should not be of real concern.
Try to keep the water out of the garage with a gasket on the door.
Stamped Concrete reviews in Baltimore
First project was to do house only in April 2010. My existing concrete porch and sidewalk was cracking and uneven, they came out to house for consult and gave me options of what they thought best for the current conditions of my concrete. I was able to choose my color of Granitite in which I choose two different colors, one for sidewalk and porch and another color for foundation of house. I did not need to be home for them to work and they completed Phase I in under a week. I have received more compliments from others when they see the end result of Granitite. It is very easy to clean, has kept its color and no visible cracks or issues as of todays date.
Second project was for Phase II in March 2011, I had concrete floors in unfinished basement, they advised an epoxy finish to complete floors and was able to choose a color that worked for me. Finished product has improved the quality and look of my basement, I couldn't be more pleased with the work. These guys are true professionals and plan on having them back for Phase III.
Third project in May 2013, final project for them, I had them finish all sidewalks around house, back porch steps and surrounding foundation to my house to cover existing ugly concrete, kept in color of original choice. Finished product has made such a great impact on the house, I get many compliments from neighbors. I am truly pleased.
All Stamped Concrete Companies in Baltimore
Havre De Grace
Havre De Grace
Havre De Grace
Shop Local Stamped Concrete Services in Baltimore
Join Angie's List to get the best local reviews in Baltimore .
- Instant access to reviews for 700+ services
- Exclusive service discounts - up to 70 percent off!
- Top-notch support from our live call center