How fire resistant is drywall?

Drywall itself is relatively fire-resistant. It is composed of gypsum pressed between two sheets of thick paper. Gypsum is a soft mineral that by itself is not flammable. Additionally, water is incorporated into its structure. In the presence of fire, heat energy vaporizes the water, removing it gradually. Water effectively blocks the transfer of heat through the drywall. Once the water dissipates, the gypsum begins to heat past the boiling point of water, and may begin to burn.

Of course, fire resistance includes not only the products’ ability to resist ignition but also to maintain structural integrity. Some drywall manufacturers add glass fibers to the gypsum, which increases the fire resistance of the product. The glass fibers are non-combustible and help maintain the integrity of the drywall as it is dehydrated.

Type X designated gypsum boards meet the American Society for Testing and Materials (ASTM) guideline that 5/8-inch sheets applied in a single layer to both sides of standard wood framing will resist penetration by fire for at least an hour. Half-inch sheets applied in the same manner can resist fire for 45 minutes.

The fire resistance of drywall is linked not only to the way that it is manufactured, but also to the way that it is used in construction of walls and ceilings. Any Atlanta drywall contractor will know local and state standards and fire codes in regards to drywall application and finishing.

Once drywall is attached to either wood or steel studs, small gaps between the sheets would allow air, smoke, and fire to pass through. To close the joints of adjacent drywall boards, a drywall contractor will apply tape and joint compound. Drywall may be applied in multiple layers to increase fire resistance. To increase cost effectiveness, a drywall contractor will use fire resistant drywall in rooms where fires are likely to originate, such as kitchens and garages.

Fire resistant drywall cannot guarantee that it will always stop a fire from spreading. The goal in using fire resistant drywall is to slow the spread of fire from its origin, limit the damage that is done, and provide occupants time to evacuate to safety. The inherent non-combustibility of drywall, appropriate selection of drywall type, and proper installation all contribute to the overall resistance of drywall to fire.

Angie’s List contains ratings and reviews for more than 1,100 drywall contractors in the Atlanta area. Sign in today to find a contractor that will help choose the best fire prevention method for your next drywall project.


More Like This

Does your home have Chinese Drywall?

Chinese drywall is believed to be responsible for damaging hundreds of homes, creating possible health problems and prompting a string of lawsuits against builders and drywall manufacturers.

Add comment

Anonymous reviews are Internet graffiti.  Angie's List has real reviews from real people.

What is Angie's List?

Angie’s List is the trusted site where more than 2 million households go to get ratings and reviews on everything from home repair to health care. Stop guessing when it comes to hiring! Check Angie’s List to find out who does the best work in town.

Local Discounts

Daily deals up to 70% off popular home improvement projects from top-rated contractors on Angie’s List!