5 tips for sanding a hardwood floor
Few things can update a room as beautifully as refinishing a hardwood floor. (Photo courtesy of Angie's List member Laurie T. of Huntington, N.Y.)
If you're thinking of updating the look of your hardwood floors, take time to know what to expect, whether you do the project yourself or hire an experienced flooring pro.
Sanding a floor requires the use of heavy-duty rotary sanding tool that can kick up an immense amount of dust. Most rotary sanders have a vacuum attachment, which will reduce damage to your lungs and home.
Here are other ways to reduce dust damage:
- Use plastic sheeting or something similar to block off areas that aren't being worked on.
- Cover electrical outlets, air vents and windows. The dust kicked up from these power tools can jam your windows, damage your electrical outlets and even pose a serious fire hazard.
- Wear a respirator and safety goggles. High-speed rotary sanders can propel even the tiniest slivers of wood at extreme velocities.
Check floor's depth
Always check your floor depth. If an existing floor is only 1/4" thick, consider hiring a professional. Thin floors are notoriously difficult to sand. You can easily weaken the structural integrity or even sand down to the subfloor.
Make initial repairs
Before you attempt to sand or refinish your floor, repair any splits or gouges. In addition, make sure to inspect for metal nail heads. If you find any nail heads, make sure to countersink them a bit to avoid shredding the sandpaper or damaging the sander head.
You will need to use different grit types, starting with the roughest and ending with the finest. This will ensure a smooth result and allow stain and sealant to adhere properly. When using a rotary sander, be consistent with how much time you spend sanding any particular area. If the unit is on and you sand one spot for too long, you bevel the floor, which will require a very challenging repair.
Remove baseboard and quarter-round trim before you sand. Sanding can lower the floor height, creating a gap between floor and trim, and it can scuff trim.
For more information, see the Angie's List Guide to Hardwood Flooring.